A User's Manual for DELSOL3 - prod.sandia.gov - Sandia National ...

CRPREF
TRPREF
SMRP
PRPREF
XRP
CSPREF
PSPREF
XSP
CHPREF
CCPREF
SMPI
PPIREF
XPI
CSTREF
CSTRMD
VSTREF
ESTREF
XST
VMAX
EMPTY
Receiver/tower pump cost parameters; CRP, receiver
pump cost in $, given by:
where THT is defined in namelist REC or OPT, SMULT in
OPT, and PTH is the design thermal power delivered by
the heat exchangers. The denominator consists of the
corresponding terms for a reference design costing CRPREF
Default: CRPREF = 2.10~10~ ($)
TRPREF = 170.0 (m)
SMRP = 1.5
PHPREF 2.6~10~ (watts)
XRP = 0.85 (V. A-6)
Storage pump cost parameters; CSP, storage pump cost in
$, given by:
CSP CSPREF' (PTH/PSPREF)"sr
Default: CXPREF = 0.470~10~ ($)
PSPREF = 3 .0~10~ (watts)
XSP : 0.15 (V.A-6)
Piping cost parameters; CPIPE, piping cost in $, consists
of hot (CHPREF) and cold (CCPREF) pipe contributions.
Each of these includes the pipe material itself, fittings,
supports, insulation, and field erection costs.
where FPLR and FPLC are defined in namelist NLEFF, THT in
REC or OPT, SMULT in OPT on NLEFF. SMPI and PPIREF are
the reference solar multiple and thermal power corresponding
to the reference hot and cold pipe costs.
Default: CHPREF = 2.84~10~ ($/m)
CCPREF = 0.0 ($/m)
SMPI = 1.5
PPIREF = 2 .6~10~ (watts)
XPI = 1.06 (V .A-7)
Storage cost parameters; CSTOR, total storage cost in $,
consists of media containment equipment (tanks with insulation,
foundation; storage heat exchangers; etc.) and storage media costs