A User's Manual for DELSOL3 - prod.sandia.gov - Sandia National ...

IRERUN
IALL
ISTR
NSTR
= 0, no information written on Unit 30;
= 1, information written on Unit 30.
Default: IOTAPE = 0 (1I.B-2,VI.A-5)
Parameter for automatically rerunning a detailed performance
calculation of an optimized system:
= 0, no performance calculation;
-1 1, performance calculation of optimized system
according to the choice of the non-zero IPLFL’s
(namelist OPT) and TDESP (namelist BASIC).
See Figure VI-2 and Table A-2 for required
Namelists.
Constraint: IOTAPE = 1 if IRERUN = 1.
Default: IRERUN = 0 (V1.A-5)
Parameter controlling search algorithm:
- 0, “smart” search (selected subset of THT, W, H,
etc);
T 1, all possible combinations of optimization
variables evaluated (long running times
required).
Default: IALL = 0 (1V.E)
Parameter identifying storage optimization in the detailed
performance calculation of DELSOL optimized design:
-r 0, no optimization on storage size; maximum size
as determined in subroutine MAX used;
# 0, optimum storage size determined; NSTR discrete
values between 0 and ISTR times the maximum size
determined in system optimization (MAX) are evaluated.
Default: ISTIZ -=L 0 (IV , C-5 ,V .A-8)
Number of storage sizes, between 0 and ISTR times the
maximum size, evaluated to find optimum storage capacity
for a given design.
Default: NSTR -: 1 ( IV . C- 5, V . A-8)