A User's Manual for DELSOL3 - prod.sandia.gov - Sandia National ...

C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
c
C
C
C
C
C
c
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
156
SUBROUTINE SETCAV
SUBROUTINE SETCAV IS USED WHEN A CAVITY RECEIVER IS SPECIFIED.
IT ASSIGNS EACH ZONE TO THE CAVITY AT WHICH IT SHOULD POINT. THIS
IS NECESSARY FOR THE SPILLAGE CALCULATION. FOR ZONES SPLIT
BETWEEN TWO APERTURES, SETCAV DETERMINES THE FRACTION POINTED
TOWARD EACH OPENING.
THIS ROUTINE IS CALLED BY
OPTCAL
PERCAL
THIS ROUTINE CALLS
NONE
SUBROUTINE SETFLX
SUBROUTINE SETFLX GENERATES THE COORDINATES OF THE POINTS ON
AN EXTERNAL RECEIVER AT WHICH THE FLUX IS TO BE CALCULATED
THIS ROUTINE IS CALLED BY
OPTCAL
PERCAL
THIS ROUTINE CALLS
NONE
SUBROUTINE SPILL
THIS SUBROUTINE CALCULATES THE AMOUNT OF FLUX
INTERCEPTED BY THE RECEIVER FOR EACH TERM IN THE
THIS ROUTINE IS CALLED BY
HERMIT (OPTC A L , MO MENT (PERC A L))
THIS ROUTINE CALLS
NONE
SUBROUTINE OPTCAL
SUBROUTINE OPTCAL IS ACCESSED FOR OPTIMIZATION RIJNS. THE
USER SPECIFIED ARRAYS FOR TOWER HEIGHT AND RECEIVER DIMENSIONS
ARE SELECTIVELY SEARCHED AT EACH REQUESTED POWER LEVEL TO FIND
THE SYSTEM DESIGN GIVING THE LOWEST COST ENERGY. FOR EACH
TOWER AND RECEIVER COMBINATION CONSIDERED, THE AVERAGE YEARLY
PERFORMANCE IS RECALCULATED. SUBROUTINE MAX IS THEN CALLED
TO PERFORM THE FIELD LAYOUT AND ENERGY COST CALCULATION.
THIS ROUTINE IS CALLED BY
DELSOL