I-LINE II Busway - Schneider Electric

11/11
Assembled Trench Duct
Note: All part numbers listed below are for 2 3 ⁄ 8 "–3 3 ⁄ 8 " deep, one compartment trench with vinyl tile trims.
Straight
Sections
Full Length
Factory
Cut-to-Length
(12" Wide Only)
a Straight length cover plates are shipped separately and must be ORDERED SEPARATELY.
b Covers and/or vertical elbows for connecting trench duct to lay-in wall duct—ORDER SEPARATELY.
Tee
Trench Duct
Class 5230
Notes:
1. STANDARD LENGTH of trench duct is 10 ft. Gasketed cover plates are ordered and shipped
separately.
2. FEATURES of trench duct:
a. Trench duct width is cover plate width.
b. Tub width is trench duct width less 1.8".
c. Overall width (bottom flange to flange) is 3" wider than trench duct width.
d. Standard depth is adjustable from 2 3 ⁄ 8 " to 3 3 ⁄ 8 ". Also available as standard is depth adjustable
from 3" to 4". To order change “2” to “3”. Ex. RSV063100120. Applies to trench duct,
elbows, crosses tees and reducers. Same price as standard device. Other depths available.
e. Tees, crosses, horizontal elbows and reducers are shipped complete with cover plates
assembled.
f. Grey vinyl tile trim is furnished as standard. Aluminum is available when requested.
g. All compartments over 17" wide must be supported with dividers or posts.
3. PRICES for Additions and Special Features:
a. For each foot of adjustable partition add $32.00 per foot of partition.
b. For each 1" of depth beyond range of 3" to 4" add $16.00 per foot of trench duct.
c. For double tile trim on two sides of cover plate ONLY add $60.00 per foot of trench duct.
d. For double tile trim on all four sides of cover plate add $200.00 per foot of trench duct.
e. For support post add $32.00 per foot of trench duct for each row of posts required.
Trench Duct Covers Only (5 Plates per 10' Length)a Complete Device
Length Width Catalogue Number Price Width Length Catalogue Number Price Per 10' Length Per Foot
10'-0"
6'-0"L
4'-3 1 ⁄ 2 "L
3'-3 1 ⁄ 2 "L
2'-0"L
1'-0"L
0'-3 1 ⁄ 2 "L
6"
9"
12"
18"
24"
30"
12"
12"
12"
12"
12"
12"
RSV062100120
RSV092100120
RSV122100120
RSV182100120
RSV242100120
RSV302100120
RSV122100072
RSV122100051.5
RSV122100039.5
RSV122100024
RSV122100012
RSV122100003.5
Trench Duct Elbows, Tees, and Crosses
Item
90° Horizontal c 6"
9"
12"
18"
24"
30"
Complete Device
Width Catalogue Number Price
RHV062100009
RHV092100012
RHV122100015
RHV182100021
RHV242100027
RHV302100033
45° Horizontal Elbowc 12" RHV12245
Teesc
Crossesc
6"
9"
12"
18"
24"
30"
6"
9"
12"
18"
24"
30"
RTV062100011
RTV092100014
RTV122100017
RTV182100023
RTV242100029
RTV302100035
RXV062100012
RXV092100015
RXV122100018
RXV182100024
RXV242100030
RXV302100036
All cover plate corner
notches are 1 1 ⁄ 2" deep
c Includes cover; shipped attached.
d For 3" to 4" trench duct, add a 3 to end of catalogue number.
Note: All devices thru 18" width are available in aluminum. Height is factory-set to customer
specifications from 2 1 ⁄ 2 to 4 inches. (Non-Adjustable)
6"
9"
12"
18"
24"
30"
12"
18"
24"
12"
RCP0624
RCP0924
RCP1224
RCP1824
RCP2424
RCP3024
RCP1212
RCP1812
3–24" Long Coversb
2–24" Long Covers & 1 – Wall Duct Vertical Elbowb
1–24" & 1–12" Long Cover & 1—Wall Duct Vertical Elbowb
1–24" Long Coverb
1–12" Long Coverb
1–Wall Duct Vertical Elbowb
Trench Duct Fittings
Item Width
End Closures d
Vertical Elbows
Riser and Cabinet
Connector
(Removable Front)
Z-Divider 5'-0" d
Adjustable Barrier and
Support Strip
6"
9"
12"
18"
24"
30"
6"
9"
12"
18"
24"
30"
6"
9"
12"
18"
24"
30"
. . .
. . .
Catalogue
No.
REC06
REC09
REC12
REC18
REC24
REC30
RVE06
RVE09
RVE12
RVE18
RVE24
RVE30
RRC06
RRC09
RRC12
RRC18
RRC24
RRC30
RZD60
Tape for Trench Duct (180 ft. rolls) G1414
Marker for Cellular Floor G1426
. . .
. . .
All
ordered
separately
Price
DE8-23
BUSWAY AND WIRE
DE8 MANAGEMENT SYSTEMS