Download - Eppendorf Canada
Download - Eppendorf Canada
Download - Eppendorf Canada
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4 Adapters<br />
212 Sample Handling<br />
in situ Adapter<br />
Technical specifications<br />
Sample capacity Max. 4 glass slides 76 x 26 mm<br />
Temperature range 4–99 °C<br />
Temperature distribution 20–72 °C ±0.6 °C<br />
across the adapter<br />
95 °C<br />
±1.0 °C<br />
Temperature control speed ≥1.0 °C/s (heating)<br />
measured on the adapter ≥0.7 °C/s (cooling)<br />
Temperature Validation System for Mastercycler Family<br />
Ordering information<br />
Order from your laboratory supply dealer.<br />
Product appearance, specifications, and/or prices are subject to change without notice.<br />
4 | Consumables | PCR<br />
Description Catalog No.<br />
Temperature Validation System<br />
(96-well probe included)<br />
950008059<br />
Temperature sensor, 384-well 950008041<br />
Product features<br />
‡ Easy to handle<br />
‡ Perfect fit for optimal heat transfer<br />
‡ Software supported, easy to program, extremely flexible<br />
‡ Can accommodate 4 standard glass slides<br />
‡ Transparent covering hood—in situ frames trap moisture<br />
(sold separately)<br />
Description<br />
The in situ Adapter can be used to convert your Mastercycler ®<br />
or Mastercycler nexus to an in situ device as easily as if you<br />
were to insert a PCR plate. And the quality of the heat transfer<br />
is equally as high! With precise block homogeneity, the in situ<br />
Adapter has room for up to four standard glass slides.<br />
Ordering information<br />
Description Catalog No.<br />
in situ Adapter<br />
950007052<br />
for Mastercycler nexus<br />
and Mastercycler<br />
in situ Frames Please Inquire<br />
Product features<br />
‡ Single-well probe<br />
‡ Sensor for 0.2 mL tube position<br />
‡ Optional: sensor for 384-well block, sold separately<br />
‡ Simple, rapid validation and calibration<br />
‡ Autocalibration with Mastercycler software, version<br />
2.10 or higher<br />
‡ Can be third-party calibrated<br />
Description<br />
The Temperature Validation System for the entire Mastercycler,<br />
Mastercycler nexus, Mastercycler ep and Mastercycler pro<br />
families enables simple and rapid validation and calibration of<br />
block temperature. The program for automatic measurement<br />
and calibration is integrated into the thermal cycler software,<br />
thus providing an accurate and precise system that meets all<br />
documentation and detection requirements in the laboratory.