TOTALLY - Homatherm

TOTALLY 

UNBEATABLE 

The innovative 

all-in-one supplier 

of insulation systems 

made out of WOOD and 

CELLULOSE fi bers 

www.homatherm.com 

1

Our products stand for smart all-year active insulation system enabling pleasant and healthy living – for a lifetime 5-Star quality insulation ★★★★★ 

Our PRODUCT 

RANGE: heat, air and 

moisture control using WOOD 

or CELLULOSE BATTS, , loose 

fi ll or sprayed materials and 

compression resistant insulati- insulati- insulation 

systems 

Insulation batts 

NEW! 

Insulation boards 

Loose fi lls 

Save energy … 

…reduce utility costs 

and protect the environment. 

HOMATHERM ® 

provides: 

• U-value of your choice 

• High thermal effi ciency (thermal 

conductivity coeffi cient less 

than 0.038 W/(mK) 

• Excellent dimensional stability 

• Material not affected by convective 

air movements 

Resulting in: 

Energy effi cient and environment 

friendly building 

Thermal 

protection … 

…Reduction of thermal 

peak loads. 

HOMATHERM ® 

provides: 

• High thermal resistance 

• High specifi c heat capacity 

• High density 

• Moisture buffer capability 

Resulting in: 

high thermal capacity, e.g.,160 mm 

holzfl ex ® delays thermal wave for 

more than 10 hours and will prevent 

the room from overheating 

Moisture 

protection … 

… indoor environment 

that feels good for 

generations. 

HOMATHERM ® 

provides: 

• Vapor permeable construction 

• High hygroscopic moisture 

capacity 

• High moisture buffer capacity 

Resulting in: 

Moisture protection and durability 

of the construction 

Sound 

insulation … 

…Acoustic protection 

for any level of 

demand. 

HOMATHERM ® 

provides: 

• Sound absorbing structure 

• High density 

• Low dynamic stiffness 

• High air fl ow resistivity 

Resulting in: 

Pleasant silence in the room 

(high sound attenuation) 

Ecology … 

… 100% of environmentally 

friendly materials made of 

wood and cellulose. 

HOMATHERM ® 

provides: 

• Construction without any 

chemical wood protection 

• Practically no emission of 

VOC and formaldehyde 

• CO2 neutral raw materials 

Resulting in: 

Suitable for allergic people, 

healthy living 

2 3

STEEP SLOPE ROOF – Interior insulation holzFlex ® protect 

Economic insulation with 

highest performance! 

• Extraordinary thermal lag protects during 

summer overheating 

• Tight connection to rafter, heat fl ow not 

affected by air movements 

• Non-irritant to the skin during installation 

indoor climate for a healthy living 

ABOVE THE SHEATHING PLANE 

holzFlex ® 

protect 

holzFlex ® 

Mais 

holzFlex ® 

protect 

fl exible insulation batt 

for the highest performance 

requirements 

100% natural – the 


with binder of starch 



requirements 

UNDER THE SHEATHING PLANE 

• Dimensionally stable between 

rafters and roof trusses 

• Friction fi t width up to 1.2 m 

holds without additional 

fasteners 

• Suitable for friction fi t >30 mm 

• Moisture buffer 10 l/m3 protects the structure against 

moisture problems 

• like holzFlex® protect 

• the insulation standard for 

healthy building 

• recommended by the Sentinel- 

Haus Institute 





fasteners 


• Moisture buffer 10 l/m3 protects 

the structure against moisture 

problems 

Thermal performance for 240 mm thickness (as drawn in Figure) 

U-Value in W/(m 2 ·K) R-Value in W/(m 2 ·K) [British Units] 

0,176 5,68 [32.3 (ft2 °F hr)/Btu] 

Thermal lag (phase shift) 

More than 12 hours 

Rating 

★★★★ 

Total thickness of insulation 240 mm 

— 160 mm 80 mm 

• High degree of energy effi ciency is a result of low thermal conductivity coeffi cient, 

less than 0.038 W/(m² ·K) or thermal resistance higher than 3.74 (ft2 Background information 

oF hr)/Btu per 

inch thickness 

• Excellent thermal performance is the result of high specifi c heat capacity 

of the wood fi bres in combination with the high density of the holzFlex® batt 

• High structural stability and fl exibility of the holzFlex® result in tight and fl ush fi t 

between the rafters leaving no gaps. This reduces energy losses caused by 

air movement 

• High moisture storage capacity of the wood fi ber batt protects the construction and 

has a positive effect on the indoor climate 

• Easy increase of the insulation thickness by adding strapping perpendicular to the 

rafters 

• Ideal for thermal upgrade of existing roofs because removal of the existing roofi ng is 

not required 

• Easy handling and installation because friction fi t works already at 30 mm thickness 

• holzFlex® protect and holzFlex® Mais are non-irritating, ecologic and recyclable 

Friction fi t insulation batts between rafters, 

trusses, beams wood or plastic strapping 

holzFlex ® 4 protect – more at page 30 

5

STEEP SLOPE ROOF – Exterior insulation of inhabited attics UD-Q11 protect 

Formwork, roof sheathing and 

insulation in one working step! 

• Additional insulation for retrofi tting with 

thickness up to 120 mm 

• High thermal lag because of high thermal 

storage capacity 

• Weathering protection up to 10 weeks 

before roof covering 

UD-Q11 

protect 

the energy and cost 

effective deck and 

insulation boards 


holzFlex ® 

protect 

holzFlex ® 

Mais 



requirements 




BELOW THE SHEATHING PLANE 

• improved thermal performance 

easy handling 

• ideal for roof retrofi tting – from 

15° slope without adhesively 

bonded underlay 

• high air pressure resistance in 

spite of lower weight 





fasteners 


• Moisture buffer 10 l/m3 protects the structure against 

moisture problems 






Thermal performance for 280 mm thickness 

(as drawn in Figure) 


0,151 6,62 [37.6 (hr ft2 °F)/Btu] 



Rating 

★★★★★ 


120 mm 160 mm — 

Background information 

• The combination of the exterior panel UD-Q11 and the fl exible wood fi ber 

insulation batt in the rafters offers excellent energy effi ciency both in 

winter and in summer. Note that the high thermal lag combined with high 

thermal resistance is very effi cient in reducing peak loads during the 

whole year 

• The water vapor retarder is no longer required in this assembly as the 

exterior panel increases temperature in the risk zone and eliminates 

condensation problems 

• For roofs with a limited rafter height the UD-Q11 protection panel can be 

applied as continuous insulation with thickness up to 120 mm directly onto 

the rafters 

• UD-Q11 panel is resistant to weathering for up to 10 weeks and can be 

used as temporary roof without roof covering either during construction 

or if the roofi ng is damaged 

Simple and smart solutions for thermal 

upgrade / renovations. 

6 UD-Q11 protect – more at page 40 

7

STEEP SLOPE ROOF – The homogenous, roof-top insulation HDP-Q11 standard 

All-purpose insulation, most 

effi cient for its costs! 

• Cost-effi cient high-performance wood 

insulation 

• In one step it creates the passive house 

standard 

• Insulation directly mounted onto the rafters 

HDP-Q11 

standard 

the cost-effective, universal 

high performance 

board 


holzFlex ® 

protect 

holzFlex ® 

Mais 



requirements 





• highly effi cient insulating board 

from a thickness of 40 – 240 mm 

• easy laying thick insulation 

• from a thickness of 140 mm 

also available in large-sized 

boards 





fasteners 




problems 








U-Value in W/(m2 ·K) R-Value in W/(m2 ·K) 

[British Units] 

0,097 10,87 [61.7 (hr ft2 °F)/Btu] 



Rating 

★★★★★ 


• Can be used as roof-top mounted insulation placed 

directly onto the rafters 

• Extraordinary mix of highly effi cient thermal insulation 

l= 0.038 W/(m2 ·K) i.e., 3.74 (ft2 oF hr)/BTU per inch 

and high heat storage capacity for outstanding 

performance year around 

• Construction without thermal bridge effect because of 

the insulation on the rafters 

• Insulation thickness up to 240 mm per single layer 

• Sustainable construction method, ecologically 

reasonable, recyclable 

INTELLIGENT. 

Innovative: Install large-size boards without wood frame 

8 HDP-Q11 standard – more at page 36 

9

LOW SLOPE ROOF – External insulation for residential and commercial buildings HDP-Q11 protect 

Low slope roof with exterior 

insulation! 

• Ecologically compatible and resource protecting 

• High wind uplift and load-bearing capacity, 

dimensionally stable 

• Economic: Insulating up to 240 mm thickness in 

one work step 




0,153 6,54 [37.1 (hr ft2 °F)/Btu] 



Rating 

★★★★★ 


HDP-Q11 

protect 

240 mm — — 

the heavy-duty one for 

roof,fl oor and upper 

fl oor ceilings 



• can be used for many applications 

because it withstands ≥ 70 kPa 

• iideal for fl at roofs, subfl oors, 

radiant heating etc 

• 25% lighter thanks to new 

manufacturing process 

• Mechanically attached 


• Best heat protection through high specifi c heat 

capacity of the wood fi bres in combination 

with the high density of the HDP-Q11 protect. 

• The fl at roof constructions with HDP-Q11 protect 

has outstanding compression resistance 

• Very economic when using a single-layer insulation 

up to 240 mm thick 


reasonable and recyclable material 

• The moisture storage capacity of the insulation 

board enables constructions in accordance with 

building physics. For example, moisture from the 

humid room air can be stored in the insulation and 

when the air is dryer it is given off to the 

atmosphere.. 

• Good sound insulation properties in comparison 

with conventional fl at roof insulations, thanks to the 

absorbing fi bre structure 

• Mechanical attachment 

COMPRESSION 

RESISTANT. 

Especially for low slope roofs 

10 HDP-Q11 protect – more at page 37 

11

ATTICS FLOOR – Floor insulation for non-heated attics HDP-Q11 protect 

The perfect all year 

around insulation! 

• Saving energy and costs – ideal for renovations 

• Perfect cold, heat and sound insulation also 

with non-insulated roofs 

• Full utilization of the attic with simple ceiling 

HDP-Q11 

protect 

holzFlex ® 

protect 



board 


holzFlex ® 

Mais 



requirements 


fl exible nsulation batt 



• highly effi cient insulating 

board from a thickness 

of 40 – 240 mm 

• easy laying thick insulation 

• from a thickness of 140 mm 

also available in large-size 

boards 





fasteners 




problems 








U-Value in W/(m2 ·K) R-Value in W/(m2 ·K) 

[British Units] 

0,096 10,42 [59.2 (hr ft2 °F)/Btu] 



Rating 

★★★★★ 


240 mm 180 mm — 


• With the help of this construction one may easily do 

an effi cient insulation of the attics fl oor 

• ull utilization of the attic with simple, fl oating laying of 

the HDP-Q11 protect and boards (for example a 

plywood / OSB (Oriented Strand Board) or even 

gypsum boards) 

• versatile choice of insulation on the top sheathing 

– ranging from looses fi lls for non-used attic, to 

fl exible wood fi bre insulation batt for occasional use 

up to the compression resistant wood fi bre insulation 

boards (as shown on page 12) for full utilization of 

the fl oor 

• ideal as fi nishing component for heated residential attaics 

High effi ciency and 

good indoor climate 

with use of an conditioned 

attic 


13

ExTERNAL WALL – Plaster on brick or another massive wall FD-Q11 standard 

The noise stays outside – heat 

and comfort stays inside! 

• Safety and durability for your property 

• Best noise insulation for the occupants 

• Insulation and plaster support are the same 




0,161 6,21 [35.3 (hr ft2 °F)/Btu] 



Rating 

★★★★★ 


FD-Q11 

standard 

Exterior insulation 

ID-Q11 

standard 

140 mm — 80 mm 

Interior insulation 

the ideal plaster support 

panel for facade retrofi tting 

and massive walls 

the support board for 

interior plaster 

• Small size up to a thickness of 

160 mm 

• Resistant to weathering for up 

to 4 weeks if board is not 

plastered 

• High impact resistance 

• For application of climatic (clay) 

other interior plasters 

• For moisture buffer and building 

protection and healthy indoor 

climate – ideal for retrofi t of 

historic buildings 

COMPRESSION 

RESISTANT. 

Especially for plastered board acting as 

the cladding 


• High degree of component protection and safety 

thanks to the sturdy system that is open to diffusion 

• Moisture is removed by the capillary-active and 

non-retarding insulation boards to the brickwork. 

• A trouble- free removal of any incidental moisture 

is provided 

• High pressure resistance provides protection against 

vandalism and impact loads 

• Thermal insulation and peak load reduction 

contribute to the excellent cost-benefi t ratio. 

Furthermore, the storage capacity of the wall behind 

the external insulation interacts with the external 

insulation. 

• For solid construction, the work is similar to the 

traditional 

• Direct assembly of the façade is possible without 

additional adhesives or attachments 

• Less contamination through algae and moss than 

with other insulation materials, thanks to the unique 

heat storage capacities of the wood fi bers 


sensible, recyclable 

14 FD-Q11 standard – more at page 34 

15

ExTERNAL WALL – Wood frame wall with facade insulation suitable for 

plaster rendering 

Wood insulation for wood frame - 

An uncompromising construction! 

• Insulation that is open for vapor diffusion and 

free of thermal bridges 

• Protects from noise, heat and cold 

• Safety and durability for your timber frame 

FD-Q11 

protect 


holzFlex ® 

standard 

holzFlex ® 

Mais 

holzFlex ® 

protect 


the ideal plaster support 

panel for facade retrofi tting 

and massive walls 

The fl exible insulation 

batt - cost effective 

and light 






requirements 

• Small size up to a thickness of 

160 mm 

• Resistant to weathering for 

up to 4 weeks if board is not 

plastered 

• High impact resistance 

• perfect panel insulation 

• Very good heat protection in 

combination with Q11 insulation 

boards 

• in practical formats in wood 

construction 









holds without additional fasteners 




problems 

INTELLIGENT. 

Ecological construction completely from wood. 




FD-Q11 protect 


0,146 6,85 [38.9 (hr ft2 °F)/Btu] 



Rating 

★★★★★ 

100 mm 160 mm 30 mm 


• Insulation and plaster support board up to a thickness of 120 mm in one 

• Sturdy system is open to diffusion makes handling easy and reduces damages 

• Optimum thermal performance in result of thermal effi ciency and heat storage 

capacity of the wood fi bers 

• Wall construction, without thermal bridges, up to passive house standards can 

be made with conventional wood frame structure (no special construction or 

double-wall is required) 

• Perfect combination of the advantages of timber-frame construction (short 

construction, time, dry indoor construction, ecologically compatible and CO2neutral) 

with the excellent insulation properties of wood fi ber (thermal, moisture, 

noise and fi re protection) 

• High pressure resistance ensures high protection against vandalism and 

impact loads 

• Boards are directly attached and fastened to the frame studs 

16 FD-Q11 protect – more at page 35 

17

MASONRY WALL – Internal insulation on brickwork ID-Q11 standard 

Retaining the façade with the 

use of internal insulation! 

• Thermal upgrade of the existing structure, also 

possible with historic building facades 

• Good indoor climate for a healthy living 

• Optimum humidity balance through moisture 

sorption 




0,361 2,77 [15.7 (hr ft2 °F)/Btu] 





ID-Q11 

standard 


— — 80 mm 

The internal insulation 

board, for application of 

plasters (stucco) 

• For application of clay 

and other interior plasters 

• Cosy and warm walls 

• Effective use of thermal insulatione 

ven with a thin thicknesses 


• In accordance with building physics safety from mold is ensured when 

using the combination of the two materials wood and clay-plasters that has 

absorption capacities and has been tried and tested for hundreds of years 

• The interior insulation approach is possible as condensing water vapour 

is taken up by the wood fi bre insulation and released later 

• Positive effect on the indoor climate through natural humidity 

compensation by the wood fi bre insulation, particularly in combination 

with highly hygroscopic clay plaster 

• Highly effi cient insulation effect with simple easy-to-install 

layer-type structure 

• Improved wall temperature through higher surface temperature 

• For massive construction, the conventional work steps are similar to 

the traditionally used materials 

• Service channels can be cut into the walls – particularly in solid 

construction – and be plastered in a conventional way 

Interior insulation is available. 

18 ID-Q11 standard – more at page 38 

19

WOOD FRAME WALL – Interior insulation ID-Q11 install 

Wall frame, insulation, and 

internal fi nish in one work step! 

• Internal insulation without thermal bridges 

• Good indoor climate for healthy living 

• Fast and easy to install 

UD-Q11 

protect 


holzFlex ® 

standard 

holzFlex ® 

Mais 

ID-Q11 

install 


Energy effi cient and 

cost-effective board for 

application above the 

roof sheathing 

The fl exible insulation 

batt- cost effective and 

light 




The continuous insulationfor 

installation of 

services and leveling 

• windproof run-a-round joint 

of clay plasters 

• high pressure resistance 

in spite of 25% less weight, 

Effective use of thermal 

insulation even with a thin 

thickness 

• perfect panel insulation 

• Very good heat protection in 

combination with Q11 insulation 

boards 

• in practical formats in wood 

construction 

• like holzFlex ® protect 





• Channels for services are simply 

milled into the insulation 

• ideal insulation thickness of 

50 mm for installation levels 

• fi xing without costly wood 

strapping (battening) 

Our application – special 

Different board sizes for installation levels. 

WELL 

THOUGHT-OUT. 




0,154 6,49 [36.9 (hr ft2 °F)/Btu] 



Rating 

★★★★★ 


52 mm 160 mm 50 mm 


• The internal insulation ID-Q11 is installed directly onto the internal wall sheathing 

(e.g. OSB) over the full surface to eliminate the effect of thermal bridges. 

• If the OSB is placed on outside (like in the USA) use the application of runners 

or wood strapping 

• Service channels/ducts can simply be cut into the insulation board and covered 

by means of the internal cladding. 

• Final and permanent attachment of the insulation is carried out when the internal 

fi nish (for example gypsum plaster boards) is fastened to the frame wall through 

the insulation board 

• No penetration of the air and vapor barriers as these barriers are installed on the 

other side of the OSB or under the interior insulation. 

• Positive effect for the indoor climate through natural humidity compensation by 

the wood fi bre insulation 

• Highly effi cient insulation with simple easy-to-install layer structure 

20 ID-Q11 install – more at page 39 

21

INTERNAL WALL – Acoustic protection for every room 

No noise from the sides 

or below! 

• Perfect Acoustic protection 

• Faster construction and less penetration 

through well fi tted batts 

• Healthy indoor climate 

Performance of the component 

Sound insulation 

36 dB 

Healthy living 

★★★★★ 

Rating 

★★★★★ 

Insulation thickness: 80 mm 

— 80 mm — 

fl exCL ® Interior insulation 

ideal for sound 

insulation and drywall 

fi nishing – the fl exible 

cellulose insulation for 

highest performance 

requirements 


• the system is suitable for wood 

frame constructions 

• high bulk density and material 

structure for best sound insulation 

WELL 

PERFORMING. 

in Fire and acoustic protection 

fl exCL ® 22 – more at page 33 

23 

Background 

fl exCL ® 

• Used in residential buildings, offi ces, hotels, schools, 

children indoor playgrounds and similar buildings 

because of requirements for acoustic protection 

• The high density, absorbing structure of the material, 

and the low dynamic modulus of the cellulose insulation 

ensures the best acoustic protection 

• Moisture content is affected by vapor diffusion and 

hygroscopic sorption characteristics of the cellulose 

• Better fi re protection with lower cost, up to 90 min 

fi re resistance for combustible construction 

• In metal constructions, with adjustment of sizes the 

installation process is rapid

FLOORS – Insulation of wooden joist ceilings 

The whisper-quiet ceiling! 

• Best footsteps and airborne noise insulation for 

quietness and comfort 

• Can also be installed under planks, parquet, 

carpets or under fl oor heating 

• Fast utilization of ceilings and fl oors 

silentTop ® fl oor insulation system: 

easy, quick and costeffective 

ABOVE THE BEAMS 

fl exCL ® ideal for sound insulation 

and dry lining 

– the fl exible cellulose 

insulation mat for 

highest demands 

holzFlex ® 

protect 

holzFlex ® 

Mais 

BELOW THE BEAMS 



requirements 




• 1m 2 laid within 7 minutes 

• perfect sound-insulation 

• thickness of >40 mm 

• the system avoids sound bridges 

and is suitable for wood frame 

constructions 

• high bulk density and compact 

material structure for best 

sound insulation 



• Friction fi t width up to 1,2m holds 

without additional fasteners 

• rafters, posts and roof trusses 

fl exibility 



problems 

• like holzFlex ® protect 



• recommended by the 

Sentinel-Haus Institut 


Sound insulation 

36 dB 

Healthy living 

★★★★★ 

Rating 

★★★★★ 

Insulation thickness: 200 mm 

60 mm 140 mm — 

Background Information 

• Floor construction using a combination of heavy components with 

fl exible wood and cellulose fi bre insulations achieve a standard footstep 

noise reduction level Ln(w) of up to 36 dB 

• The absorbing fi ber structure, the density and the low modulus of the 

wood and cellulose fi ber insulation batts ensures outstanding sound 

insulation. 

• A variety of fl ooring types is possible, for example planks, parquet 

and carpets. 

• Very economic, quick and easy laying the fl oor insulation silentTop® 

• No need for vapor retarders; humidity compensating through good 

sorption properties of the wood and cellulose fi bers 

• Entirely dry construction – no need for concrete or screed 

silentTop ® 

Our insulation between rafters, 

wooden beams and stapping. 

24 silentTop 25 

® – more at page 33

FLOORS – insulation for fl oors, slab on ground and ceilings above 

unheated spaces 

Perfect thermal insulation and 

comfort feeling effect! 

• Thermal protection and comfort 

• Eliminates cold feet feeling 

• High compressive strength even with large 

insulation thickness 




0,096 10,417 



Rating 

★★★★★ 


HDP-Q11 

protect 

240 mm 180 mm — 



board 



• low thermal conductivity with 

high compressive strength 

from 70 kPa 

• ideal for cement-based or 

other light weight inorganic 

fi nishes of radiant fl oor heating 

• also used in for the insulation 

of the wood decks 


• as thermal insulation on the concrete fl oor in basements 

or slab on the ground 

• good retardation of heat losses from foot 

• under typical cement-based or gypsum screed 

• Ideal for fl oor heating 

• Thanks to a new manufacturing process the new 

HDP-Q11 is 25% lighter and therefore has better 

insulating properties 

• The profi led edges of the board eliminate thermal 

bridges in joints particularly in the large thickness of 

the insulation 

HDP-Q11 protect 

COMPRESSION 

RESISTANT. 

Especially for low slope roofs 


27

BASEMENT FLOOR – fl oor insulation above unheated space ID-Q11 standard 

Small loss of energy gives 

cost savings! 

• Perfect thermal insulation 

• Rapid installation - no form support (planking) 

needed 

• Plastering ready – for the specifi c esthetic 

demand 


Thermal lag: 

Improved more than 60% with 80 mm thickness 

Insulation thickness: 80 

mm 

— — 80 mm 


ID-Q11 

standard 

The interior thermal 

insulation board for 

upgrade of existing 

buildings 


• for plastering with lime plaster or 

other interior plasters 

• simple installation 

• optimal insulation with thickness 

of your choice 

Scientifi cally correct and 

effective insulating solution. 

Background 

• Cost effective thermal upgrade (renovation) 

• Reduction of heat losses of the basement fl oor 

• The insulation board will fi rst attached by means of adhesives and then 

secured with mechanical fasteners 

• With use of plasters the insulation boards becomes esthetically pleasing 

• Where the acoustical requirements warrant so, e.g., in hobby rooms, or 

underground the house garage, we can use one of two methods: 

• (a) as shown on page 28 where board is mechanically fastened to the 

deck or 

• (b) as described below. 

• In the latter case, we recommend use of fl exible insulation (e.g. 

fl exCL ® ) inserted by friction fi t into wood frame that is attached to 

the deck and covered by the interior covering board. 

28 ID-Q11 standard – more at page 38 

29

Flexible insulation batts Flexible insulation batts 

Dimensions 

holzFlex ® protect – durable performance for the highest demand 

Form Homogeneous insulation batts 

Profil butted 

Dimensions [mm] 1250 x 570 1200 x 625 

Thicknesses of normal format [mm] 30, 40, 60, 80, 100, 

120, 140, 160, 180, 200 

Thicknesses of special format [mm] 80, 100, 120, 140, 160, 

180, 200 

Free span between supports 

Board thicknesses 

[mm] 

Max. free span between 

supports [mm] 

• Flexible wood fibre insulation batt 

• robust quality 

• friction fit 

• manufactured using dry method 

• cross-linked uniformly in three dimensions 

Application 

The friction -fit insulation can be inserted between rafters and studs, timber frame spaces and 

service layers, in roofs, walls and floors, or as a cost-effective over-rafter insulation. 

30 40 60 80 100 120 140 160 180 200 

400 400 500 800 950 1100 1100 1100 1200 1200 

holzFlex ® Mais should be an oversize cut of 1 % of the overall installation width, as a rule of thumb. 

09 

holzFlex ® standard – cost effective and light 

Thermal conductivity 

lG = 0,037 W/(m·K), l = 0,038 W/(m·K) 

D 

Specific thermal capacity 

2100 J/(kg·K) 

Density 

approx. 55 kg/m 3 

Form Homogeneous insulation batts 


Profil butted 

lG Dimensions [mm] 1250 x 580 

Thicknesses of normal format [mm] 40, 50, 60, 80, 100, 120, 140, 160, 180, 200 


Product description 

Holzfaserdämmplatte WF–EN–13 171–T3–TR2,5-MU5-AF5 

Board thicknesses 

[mm] 

30 40 60 80 100 120 140 160 180 200 

Approval 

Max. free span bet- 400 500 600 700 800 900 900 900 900 900 

DIBt Z-23.15-1417 

ween supports [mm] 

= 0,037 W/(m·K), l = 0,038 W/(m·K) 

D 


2100 J/(kg·K) 

Density 



Holzfaserdämmplatte WF–EN–13 171–T2–TR1,0-MU5-AF5 

Approval 

DIBt Z-23.15-1417 

l =measured at 10˚C; λl G D=used for energy calculations l =measured at 10˚C; λl G D=used for energy calculations 

30 31 

Dimensions 

• Friction fit wood fibre insulation batt 

• for wall applications 



Application 

The friction-fit insulation used for additional insulation layer or as means of installation of services. 

holzFlex ® standard should be an oversize cut of 1 % of the overall installation width, as a rule of thumb. 

09

Flexible insulation batts Flexible insulation batts 

holzFlex ® Mais – durable performance for the highest demand 

• Flexible wood fibre insulation batt 

09 

• for roofs, walls and floors 

• for applications with high ecological demands 



• Bonded with an ecological fiber made from corn adhesive 

flexCL ® – optimal insulation for acoustic and dry constructions 

• Friction fit cellulose insulation batt 

• best acoustic protection for roof, wall and floor 

applications 



Dimensions 

Form 

Profil 

Dimensions [mm] 

Thicknesses of normal format [mm] 

Homogeneous insulation batts 

butted 

1200 x 625 1200 x 570 

30, 40, 50, 60, 80, 100, 


lG 120, 140, 160, 180 

Thicknesses of special format [mm] 60, 80, 100, 120, 140, 

160, 180 

= 0,038 W/(m·K), l = 0,039 W/(m·K) 

D 


2000 J/(kg·K) 

Density 



lG Product description 

Zellulosedämmplatte 

Approval 

DIBt Z-23.11-1338, ETA-03/0057 

= 0,037 W/(m·K), l = 0,038 W/(m·K) 

D 


2100 J/(kg·K) 

Density 


Application 

The friction-fit insulation with particularly high noise reduction is applied between rafters and 

studs, wooden beams, trusses and for the service layers. In floors the step insulation silentTop 

The friction -fit insulation can be inserted between rafters and studs, wood frame spaces and 

Dimensions 

Form 

Profil 

the service layers, particularly for areas with special ecological requirements, as a cost-effective 

exterior insulation. 

Homogeneous insulation batts 

butted 

Dimensions [mm] 1250 x 570 

Thicknesses of normal format [mm] 40, 60, 80, 100, 120, 140, 160, 180, 200 


Holzfaserdämmplatte WF-EN 13 171-T3-TR1,0-MU5-AF5 

Approval 

DIBt Z-23.15-1417 

® 

Application 

is particularly suitable for dry construction e.g., metal-frame demising walls with adequate spacing 

of the studs. 

holzFlex ® Mais should be an oversize cut of 1 % of the overall installation width, as a rule of thumb. flexCL ® Free span between supports 


Board thicknesses 40 60 80 100 120 140 160 180 200 

Board thicknesses 30 40 50 60 80 100 120 140 160 180 

[mm] 

[mm] 

Max. free span bet- 400 500 750 900 1000 1000 1000 1000 1100 

Max. free span bet- 400 400 500 500 750 900 1000 1000 1000 1000 l =measured at 10˚C; λl G D=used for energy calculations 



l =measured at 10˚C; λl G D=used for energy calculations 

should be an oversize cut of 1 % of the overall installation width, as a rule of thumb. 

32 33 

09

Compression resistant, rigid boards Rigid insulation boards 

Application 

Dimensions 

FD-Q11 standard – plaster support board for façade renovation and massive walls 

NEW! 

The thermal upgrade of old buildings renovation) - manufactured in small 

size and thickness up to 160 mm thickness. 

Form Homogeneous insulation boards 

Profil butted 

Dimensions [mm] 1250 x 600 845 x 600 

Thicknesses of normal format [mm] 22 100, 120, 140, 160 

Thicknesses of special format [mm] 40, 60, 80 

• support board ETICS (EIFS) i.e. exterior insulation and 

composite finish systems 

• for massive construction in wood 

• for massive construction in masonry 

• manufactured using world-wide innovative dry method 

09 

FD-Q11 protect – the homogeneous plaster base panel for wooden framework construction 

34 35 

Dimensions 

NEW! 

• Compact plaster base board 

• For wooden framework construction 

• Manufactured using the most innovative dry methods 



l = 0,039 W/(m·K) 

D 


2100 J/(kg·K) 

Density 


l = 0,039 W/(m·K) ab 80 mm 

D 

lD = 0,043 W/(m·K) bis 60 mm 


2100 J/(kg·K) 

Density 

approx. 160–185 kg/m 


Holzfaserdämmplatte 

WF-EN 13171-T4-CS(10/Y)70-TR7,5-WS1,0-MU5-AF100 

Approval 

DIBt Z-23.15-1417 

3 

Application 

Especially for plaster facades in timber frame construction. Single-layer 

of up to 120 mm, highly insulating with low thermal conductivity. 


The installation can take place directly on the studding. 



Approval 

DIBt Z-23.15-1417 

lD=used for energy calculations lD=used for energy calculations 


Profil butted Tongue and groove 

Delivery- and calculate dimension [mm] 1250 x 600 2600 x 1250 2800 x 1250 1325 x 615 2625 x 1205 2625 x 615 

Coverage dimension [mm] --- 1300 x 590 2600 x 1180 2600 x 590 

Thicknesses of normal format [mm] 22 40, 60, 80 40, 60, 80, 100 40, 60 

Thicknesses of special format [mm] 40, 60, 80 120 80 40, 60, 80 

09

Rigid insulation boards 

Dimensions 

HDP-Q11 standard – the low-priced, universal, high-performance insulation board 

NEW! 

Application 

As over-rafter insulation without roof sheathing (in large format) and on 

sheathing, external wall insulation behind facade cladding. 

• Low thermal conductivity 

• Ideal for full-surface applications in the roof, wall and ceiling area 

• 30% less weight with equal pressure resistance 



lG = 0,037 W/(m·K), l = 0,038 W/(m·K) 

D 


2100 J/(kg·K) 

Density 





Approval 

DIBt Z-23.15-1417 

l =measured at 10˚C; λl G D=used for energy calculations 


Profil butted Rebate 

Delivery- and calculate dimension [mm] 1250 x 600 1265 x 615 1815 x 615 

Coverage dimension [mm] --- 1250 x 600 1800 x 600 

Thicknesses of normal format [mm] 40, 60, 80, 100, 120 140, 160, 180, 200, 220, 240 140, 180, 220 

36 37 

Dimensions 

HDP-Q11 protect – the extra robust product for roof, floor and attic insulation 

09 09 

NEW! 

Application 

Ideal for flat roofs, attic insulation and under screed. Over-rafter insulation, 

external wall insulation behind façade cladding (also without sheathing). 

• Universally usable board 

• Extremely pressure resistant 



l = 0,039 W/(m·K) 

D 

Spezifische Wärmekapazität 

2100 J/(kg·K) 

Density 





Approval 

DIBt Z-23.15-1417 

lD=used for energy calculations 


Profil butted Rebate 

Delivery- and calculate dimension [mm] 1250 x 600 1265 x 615 

Coverage dimension [mm] --- 1250 x 600 


Thicknesses of normal format [mm] 40, 60, 80, 100, 120 140, 160, 200, 240

Rigid insulation boards Rigid insulation boards 

Dimensions 

ID-Q11 standard – the interior insulation board suitable for plaster work 

NEW! 

Application 

Interior insulation of walls in both brick and wood construction. Can be 

covered with clay plaster or other interior rendering, its hygrothermal 

properties will protect the building fabric, creates healthy comfortable 

living environment. 


Profil butted 


Thicknesses of normal format [mm] 20, 40, 60, 80 

• For interiors of existing building renovations 

• Inside insulation for external walls in brick and wood 

construction 



lG = 0,037 W/(m·K), l = 0,038 W/(m·K) 

D 


2100 J/(kg·K) 

Density 





Approval 

ID-Q11 install – the full-surface insulation for installation levels 

09 09 

38 39 

Dimensions 

NEW! 

Application 

Ideal for service installation in wood construction. Service ducts are 

easily milled into the insulation board. 


Profil butted 


• Rigid interior insulation board 

• For wood construction 



lG = 0,037 W/(m·K), l = 0,038 W/(m·K) 

D 


2100 J/(kg·K) 

Density 





Approval 

DIBt Z-23.15-1417 

Thicknesses of normal format [mm] 50 

DIBt Z-23.15-1417 

l =measured at 10˚C; λl G D=used for energy calculations l =measured at 10˚C; λl G D=used for energy calculations

Rigid insulation boards Rigid insulation boards 

Application 

UD-Q11 protect – The energy-saving and cost-saving roofing board Uniboard standard 

NEW! 

Also ideal for renovation – sheathing, roofing board and insulation in 

one step. Can be laid in a single layer, up to 120 mm thickness without 

thermal bridges. For the roof and wall area, for example as wall planking 

behind façades or as a roofing board over common rafter insulation and 

over-rafter insulation. Will provide emergency roofing for up to 

10 weeks. 

Dimensions 

Form Homogeneous insulation 

boards 

Profil Tongue and groove 

Delivery- and calculate dimension [mm] 2525 x 615 1825 x 615 

Coverage dimension [mm] 2500 x 590 1800 x 590 

Thicknesses of normal format [mm] 22, 35, 52, 60 80, 100, 120 

• Insulating rigid wood fibre roofing board 

• Ideal for renovation 



l = 0,043 W/(m·K) 

D 

2100 J/(kg·K) 

Density 





Approval 

DIBt Z-23.15-1417 

lD=used for energy calculations 

Maximal rafter center distance 

Thickness [mm] Max. rafter center-to-center distance [cm] 

22 85 

35 100 

52 110 

60 110 

80/100/120 125 

09 

• The classic wood fibre softboard 

• Manufactured using the wet method 

• Suitable for interior fitting and further 

varied applications 

40 41 

09 

Uniboard protect 

• Refined wood fibre softboard 


• For general usage inside and outside. 

Unsuitable for wet areas. 


l = 0,050 W/(m·K) 

D 


2100 J/(kg·K) 

Density 



l = 0,050 W/(m·K) 

D 


2100 J/(kg·K) 

Density 

approx. 240 kg/m 


Poröse Holzfaserplatten nach EN 622-4 (Typ SB) 

Dimensions 

• Dimension 2500 mm x 1200 mm in thickness 

8, 10, 12, 15, 18, 20 mm 

3 


Poröse Holzfaserplatten nach EN 622-4 (Typ SB. H) 

Dimensions 


8, 10, 12, 15, 18, 20 mm 

lD=used for energy calculations lD=used for energy calculations 

09


Loose fill 

HDP-classic standard fineFloc ® 

• The classic wood fibre softboard 

• For wall and roof 


Thermal conductivity Specific thermal capacity 

l = 0,039 W/(m·K) D 

Density 

approx. 160 kg/m 

2100 J/(kg·K) 

3 


Holzfaserdämmplatte WF-EN 13171-T4-CS(10/Y)20-TR7,5-MU5-AF100 

Approval 

DIBt Z-23.15-1417 

Dimensions 


20, 40, 60, 80, 100, 120 mm 

09 

• Loose fill made of cellulose with excellent flow 

characteristics 

• Filling out spaces 

• Installation to be carried out by a certified specialist 

Thermal conductivity Specific thermal capacity 

l = 0,039 W/(m·K) 1600 J/(kg·K) 

D 

Density 

Exposed, dry approx. 30–40 kg/m 3 Filling cavity, dry 35–60 kg/m3 Product description 

Zellulosedämmflocke 

Approval 

DIBt: Z-23.11-1262 

Dimensions 

• Sacks à 13,6 kg 

09 

Your HOMATHERM ® fax inquiry 

FAx +49 (0)3 46 51-4 16-39 

I want to insulate … 

Property description 

… and am in need of the following services. 

On-site consultation 

Concrete interest in: 

42 43 

Property size 

Start of construction 

Product: 

Application: 

Structural calculation 

Proposal from a HOMATHERM ® dealer 

My address 

Company 

Last name/first name 

Street/house number Zipcode/city 

Telephone/fax E-Mail 

HOMATHERM GmbH 

Ahornweg 1 

D-06536 Berga 

Phone +49 (0)3 46 51-41 60 

Fax +49 (0)3 46 51-4 16 39 

info@homatherm.com 

Information can be found here: 

Hotline +49 (0)3 46 51-416 61 

www.homatherm.com

For professional advice, contact the following addresses. All it takes is a phone call! 

HOMATHERM GmbH 

Ahornweg 1 Phone: + 49 (0)3 46 51-4 16 0 Hotline Deutsch: +49 (0)3 46 51-4 16 61 

06536 Berga Fax: + 49 (0)3 46 51-4 16 39 Hotline English: +49 (0)3 46 51-4 16 61 

Germany E-Mail: info@homatherm.com Hotline Française: N° Azur 0810-600 699 

Homepage: www.homatherm.com 

National agencies 

Great Britain 

HOMATHERM UK Ltd. 

Tel.: +44 (844)) 880 24 78 

Fax: +44 (844) 880 24 79 

E-Mail: uk@homatherm.com 

Ireland 

MacCann & Byrne Ltd. 

Main Street 

Athboy County Meath 

Irland 

Tel.: +35 (0)3 46-9 43 21 04 

Fax: +35 (0)3 46-9 43 24 35 

E-Mail: ireland@homatherm.com 

Austria 

Phone: +49 (0)151-14 25 50 44 

Fax: +49 (0)3 46 51-416-39 

E-Mail: austria@homatherm.com 

Schwitzerland 

Phone: +41 (0)31-735 60 30 

Fax: +41 (0)31-735 60 29 

E-Mail: suisse@homatherm.com 

Schwitzerland (German) 

Phone: +41 (0)79-669 48 45 

Fax: +41 (0)71-383 48 21 

E-Mail: schweiz@homatherm.com 

Netherlands 

Phone: +31 (0)5 75-56 48 05 

Fax: +31 (0)5 75-56 48 15 

Mobile: +31 (0)6 55-85 48 34 

E-Mail: nederland@homatherm.com 

Belgium/Luxembourg 

Phone: +32 (0)4 74-83 70 23 

Fax: +32 (0)16-53 47 03 

E-Mail: belux@homatherm.com 

Italy 

Phone: +39 04 71-70 80 69 

Mobile: +39 33 58-34 66 02 

Fax: +39 04 71-70 80 73 

E-Mail: italia@homatherm.com

TOTALLY - Homatherm

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?