1 | Page City Rover Immobiliser Bypass fitting instructions www ...
1 | Page City Rover Immobiliser Bypass fitting instructions www ...
1 | Page City Rover Immobiliser Bypass fitting instructions www ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 | P a g e<br />
<strong>City</strong> <strong>Rover</strong> <strong>Immobiliser</strong> <strong>Bypass</strong> <strong>fitting</strong> <strong>instructions</strong><br />
<strong>www</strong>.immobiliser-unlock.co.uk<br />
Step 1 Undo thumbscrews on cover under drivers seat and remove<br />
Step 2. Remove connector on <strong>Immobiliser</strong> control unit<br />
Step 3. Plug in new control unit (original can be left in place)<br />
Step 4. Turn Ignition ON and wait for LED to go out. Then start vehicle
Note:- The <strong>City</strong> <strong>Rover</strong> <strong>Immobiliser</strong> bypass is a ‘self coding’ device and there may be delay of up to 10<br />
minutes between <strong>fitting</strong> device and being able to start the vehicle.<br />
Fit the unit and turn ignition ON. Wait until red immobiliser light on dashboard goes out before<br />
attempting to start the vehicle<br />
2 | P a g e
Change language