Hammerfall® DSP System HDSP 9632 - RME

Word Clock
• 2 x BNC, separated driver stage
• Max. output voltage: 5 Vpp
• Output voltage @ 75 Ohm termination: 4.0 Vpp
• Output impedance: 10 Ohm
• Frequency range: 27 kHz – 200 kHz
32.4 Digital
• Clocks: Internal, ADAT In, SPDIF In, optional word clock in
• Low Jitter Design: < 1 ns in PLL mode, all inputs
• Internal clock: 800 ps Jitter, Random Spread Spectrum
• Jitter suppression of external clocks: > 30 dB (2.4 kHz)
• Effective clock jitter influence on AD and DA conversion: near zero
• PLL ensures zero dropout, even at more than 100 ns jitter
• Digital Bitclock PLL for trouble-free varispeed ADAT operation
• Supported sample rates: 28 kHz up to 200 kHz
32.5 MIDI
• 1 x MIDI I/O via 5-pin DIN jacks
• Galvanically isolated by optocoupled input
• Hi-speed mode: Jitter and response time typically below 1 ms
• Separate 128 byte FIFOs for input and output
32.6 Transfer Modes: Resolution / Bits per Sample
ASIO
• 24 / 32 bit 4 byte (stereo 8 byte)
This format is compatible with 16 bit and 20 bit. Resolutions below 24 bit are handled by the
audio application.
MME
• 16 bit 2 byte (stereo 4 bytes)
• 16 bit 4 byte MSB (stereo 8 bytes)
• 24 bit 4 byte MSB (stereo 8 bytes)
• 32 bit 4 byte (stereo 8 bytes)
User's Guide HDSP System HDSP 9632 © RME 77