Hammerfall® DSP System HDSP 9632 - RME

More documents

Recommendations

Info

31. Tech Info Not all information to and around our products fit in a manual. Therefore RME offers a lot more and detailed information in the Tech Infos. The very latest Tech Infos can be found on our website, section News & Infos, or the directory \rmeaudio.web\techinfo on the RME Driver CD. These are some of the currently available Tech Infos: Synchronization II (DIGI96 series) Digital audio synchronization - technical background and pitfalls. Installation problems - Problem descriptions and solutions. Driver updates Hammerfall DSP – Lists all changes of the driver updates. DIGICheck: Analysis, tests and measurements with RME audio hardware A description of DIGICheck, including technical background information. ADI-8 Inside Technical information about the RME ADI-8 (24-bit AD/DA converter). Many background information on laptops and tests of notebooks: HDSP System: Notebook Basics - Notebook Hardware HDSP System: Notebook Basics - The Audio Notebook in Practice HDSP System: Notebook Basics - Background Knowledge and Tuning HDSP System: Notebook Tests - Compatibility and Performance The digital mixer of the Hammerfall DSP in theory and practise HDSP System: TotalMix - Hardware and Technology HDSP System: TotalMix - Software, features, operation 74 User's Guide HDSP System HDSP 9632 © RME
32. Technical Specifications 32.1 Analog AD – Line In • Resolution AD: 24 Bit • Signal to Noise ratio (SNR): 109 dB RMS unweighted, 111 dBA @ 44.1 kHz • THD @ -3 dBFS: -101 dB, < 0.001 % • THD+N @ -3 dBFS: -99 dB, < 0.0015 % • Crosstalk: 108 dB • Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz - 21.5 kHz • Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz • Frequency response AD @ 192 kHz, -1 dB: 5 Hz - 74 kHz • Input Line: phono unbalanced, optional XLR balanced • Input impedance: 10 kOhm • Input sensitivity: Lo Gain, +4 dBu, -10 dBV • Input level for 0 dBFS @ Lo Gain: +19 dBu • Input level for 0 dBFS @ +4 dBu: +13 dBu • Input level for 0 dBFS @ -10 dBV: +2 dBV DA – Line Out • Resolution DA: 24 Bit • Signal to Noise ratio (SNR): 110 dB RMS unweighted, 112 dBA @ 44.1 kHz (unmuted) • THD: < - 104 dB, < 0.00063 % • THD+N: < -102 dB, < 0.0008 % • Crosstalk: > 110 dB • Maximum output level: +19 dBu • Frequency response @ 44.1 kHz, -0.5 dB: 1 Hz – 21.1 kHz • Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz • Frequency response @ 192 kHz, -0.5 dB: 1 Hz – 70 kHz • Output Line: phono unbalanced, optional XLR balanced • Output impedance: 50 Ohm • Output level: Hi Gain, +4 dBu, -10 dBV • Output level at 0 dBFS @ Hi Gain: +19 dBu • Output level at 0 dBFS @ +4 dBu: +13 dBu • Output level at 0 dBFS @ -10 dBV: +2 dBV DA - Stereo Monitor Output (Phones) • Signal to Noise ratio (SNR): 110 dB RMS unweighted, 112 dBA @ 44.1 kHz (unmuted) • THD: < - 100 dB, < 0.001 % • THD+N: < -98 dB, < 0.0015 % • Crosstalk: > 100 dB • Frequency response @ 44.1 kHz, -0.5 dB: 1 Hz – 21.1 kHz • Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz • Frequency response @ 192 kHz, -0.5 dB: 1 Hz – 70 kHz • Output: Standard 6.3 mm / 1/4" TRS jack • Output XLR breakout cable: 6.3 mm / 1/4" TRS Neutrik jack, lockable • Output impedance: 50 Ohm • Output level @ 0 dB: +13 dBu • Output level @ –6 dB: +7 dBu • Output level @ -12 dB: +1 dBu User's Guide HDSP System HDSP 9632 © RME 75
Page 1 and 2:
User's Guide Hammerfall ® DSP Syst
Page 3 and 4:
Driver Installation and Operation -
Page 5 and 6:
User's Guide HDSP 9632 General User
Page 7 and 8:
5. Hardware Installation Before ins
Page 9 and 10:
7. Accessories RME offers several o
Page 11 and 12:
User's Guide HDSP 9632 Driver Insta
Page 13 and 14:
10.4 Firmware Update The Flash Upda
Page 15 and 16:
Pref. Sync Ref. Used to pre-select
Page 17 and 18:
Application examples DDS allows for
Page 19 and 20:
12. Operation and Usage 12.1 Playba
Page 21 and 22:
12.3 Low Latency under MME (Buffer
Page 23 and 24: 12.6 Analog Recording For recording
Page 25 and 26: 15. Using more than one Hammerfall
Page 27 and 28: 17.2 Installation Hammerfall DSP is
Page 29 and 30: 18.2 Channel Routing MME at 96 kHz
Page 31 and 32: User's Guide HDSP 9632 Driver Insta
Page 33 and 34: 20. Configuring the HDSP 9632 20.1
Page 35 and 36: 20.2 Settings dialog - DDS Usually
Page 37 and 38: If several digital devices are to b
Page 39 and 40: 21.3 Supported Sample Rates RME's M
Page 41 and 42: 23. Diagram: Channel Routing at 96
Page 43 and 44: User's Guide HDSP 9632 Connections
Page 45 and 46: 24.2 Line Outputs The short circuit
Page 47 and 48: Note: Recordings with (pre-) emphas
Page 49 and 50: 26.2 Technical Description and Usag
Page 51 and 52: 27. TotalMix: Routing and Monitorin
Page 53 and 54: 27.2 The User Interface The visual
Page 55 and 56: As shown it is very easy to set up
Page 57 and 58: 27.7 The Quick Access Panel This se
Page 59 and 60: 27.9 The Monitor Panel The Monitor
Page 61 and 62: 27.12 Hotkeys In many situations To
Page 63 and 64: 27.14 Level Meter The HDSP 9632 cal
Page 65 and 66: 28.4 Advantages of the Matrix The M
Page 67 and 68: 29.5 Recording a Subgroup (Loopback
Page 69 and 70: Unfortunately, very often it is not
Page 71 and 72: 30.5 Simple MIDI Control The stereo
Page 73: User's Guide HDSP 9632 Technical Re
Page 77 and 78: Word Clock • 2 x BNC, separated d
Page 79 and 80: 33.2 Latency and Monitoring The ter
Page 81 and 82: 33.4 QS - Quad Speed Due to the sma
Page 83 and 84: 34. Diagrams 34.1 Block Diagram HDS
Page 85: 34.3 Overview Channels / Expansion
show all

Hammerfall® DSP System HDSP 9632 - RME

Create successful ePaper yourself

Delete template?

Save as template?