You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
15. Using more than one Hammerfall <strong>DSP</strong><br />
The current drivers support operation of up to three Hammerfall <strong>DSP</strong> systems. Different I/Oboxes<br />
may be used, in any combination. H<strong>DSP</strong> <strong>9632</strong>, H<strong>DSP</strong> 9652, Digiface, Multiface and<br />
Multiface II use the same driver, therefore can be used at the same time. Please note that only<br />
one ADAT Sync In can be used (of course). All units have to be in sync, i.e. have to receive<br />
valid sync information either via word clock or by using AutoSync and feeding synchronized<br />
signals.<br />
• If one of the H<strong>DSP</strong> systems is set to clock mode Master, all others have to be set to clock<br />
mode AutoSync, and have to be synced from the master, for example by feeding word<br />
clock. The clock modes of all units have to be set up correctly in their Settings dialog.<br />
• If all units are fed with a synchronous clock, i.e. all units show Sync in their Settings dialog,<br />
all channels can be used at once. This is especially easy to handle under ASIO, as the ASIO<br />
driver presents all units as one.<br />
Note: TotalMix is part of the hardware of each H<strong>DSP</strong> system. Up to three mixers are available,<br />
but these are separated and can't interchange data. Therefore a global mixer for all units is not<br />
possible.<br />
16. DIGICheck<br />
The DIGICheck software is a unique utility developed for testing, measuring and analysing<br />
digital audio streams. Although this Windows software is fairly self-explanatory, it still includes<br />
a comprehensive online help. DIGICheck 4.4 operates as multi-client ASIO host, therefore can<br />
be used in parallel to any software, be it MME, ASIO or GSIF, with both inputs and outputs (!).<br />
The following is a short summary of the currently available functions:<br />
• Level Meter. High precision 24-bit resolution, 2/8/18 channels. Application examples: Peak<br />
level measurement, RMS level measurement, over-detection, phase correlation measurement,<br />
dynamic range and signal-to-noise ratios, RMS to peak difference (loudness), long<br />
term peak measurement, input check. Oversampling mode for levels higher than 0 dBFS.<br />
Vertical and horizontal mode. Slow RMS and RLB weighting filter. Supports visualization<br />
according to the K-system.<br />
• Hardware Level Meter for Input, Playback and Output. As above, received pre-calculated<br />
directly from the H<strong>DSP</strong> system hardware with near zero CPU load.<br />
• Spectral Analyser. World wide unique 10-, 20- or 30-band display in analog bandpass-filter<br />
technology. 192 kHz-capable!<br />
• Vector Audio Scope. World wide unique Goniometer showing the typical afterglow of an<br />
oscilloscope-tube. Includes Correlation meter and level meter.<br />
• Totalyser. Spectral Analyser, Level Meter and Vector Audio Scope in a single window.<br />
• Bit Statistics & Noise. Shows the true resolution of audio signals as well as errors and DC<br />
offset. Includes Signal to Noise measurement in dB and dBA, plus DC measurement.<br />
• Channel Status Display. Detailled analyzis and display of SPDIF and AES/EBU Channel<br />
Status data.<br />
• Completely multi-client. Open as many measurement windows as you like, on any channels<br />
and inputs or outputs!<br />
To install DIGICheck, go to the \DIGICheck directory on the <strong>RME</strong> Driver CD and run setup.exe.<br />
Follow the instructions prompted on the screen.<br />
DIGICheck is conctantly improved. The latest version is always found on our website<br />
www.rme-audio.de, section Downloads/Tools.<br />
User's Guide H<strong>DSP</strong> <strong>System</strong> H<strong>DSP</strong> <strong>9632</strong> © <strong>RME</strong> 25