Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pref. Sync Ref.<br />
Used to pre-select the desired clock source. If the selected source isn't available, the unit will<br />
change to the next available one. The current clock source and sample rate is displayed in the<br />
AutoSync Ref display.<br />
The automatic clock selection<br />
checks and changes<br />
between the clock sources<br />
Word Clock, ADAT and<br />
SPDIF.<br />
<strong>System</strong> Clock<br />
Shows the current clock<br />
state of the H<strong>DSP</strong> system.<br />
The system is either Master<br />
(using its own clock) or<br />
Slave (see AutoSync Ref).<br />
Breakout Cable<br />
Checking 'XLR' lowers the<br />
analog Line output level by<br />
6 dB. Using the balanced<br />
XLR output cable then<br />
results in correct reference<br />
levels.<br />
Input Level<br />
Choice of the reference level and with this of the sensitivity of the analog Line input.<br />
Output Level<br />
Choice of the reference level and with this of the level at the analog Line output.<br />
Phones<br />
The volume at the headphone output can be adjusted separately from the Line output. The<br />
signal can be lowered by 6 or 12 dB, or completely switched off via Mute.<br />
User's Guide H<strong>DSP</strong> <strong>System</strong> H<strong>DSP</strong> <strong>9632</strong> © <strong>RME</strong> 15
Change language