AquaShape LipoCollector™ Instructions for use

More documents

Recommendations

Info

Human Med AG Instructions for use and processing of the LipoCollector TM The parts are now as shown below: Page: Vers./Date: 8. The fine filters (A) are single-use material and must be disposed of. 8 of 20 1 / 15.07.2008 9. All individual parts required for re-use, collection container, perforated metal plate, container unit, lid, reducer and retaining ring, must be immersed in the cleaning and disinfecting solution (Gigasept Instru AF, 1.5%, made up with lukewarm water, demineralised water if possible) for at least 10 minutes or longer if necessary for stubborn or dried soiling. A 10. Then the cavities must be cleaned out: Both tubes of the container insert must be cleaned with the 5 mm brush.
Human Med AG Instructions for use and processing of the LipoCollector TM Page: Vers./Date: 9 of 20 1 / 15.07.2008 The internal spaces in the lid must be cleaned with the 5 mm and the 10 mm brushes. 11. The O-ring (A) must be removed from the reducer. A The reducer must then be cleaned with a 5 mm brush.
Page 1 and 2: Human Med AG Instructions for use a
Page 7: Human Med AG Instructions for use a

AquaShape LipoCollector™ Instructions for use

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?