Lamp and Ballast Catalog - Osram Sylvania
Lamp and Ballast Catalog - Osram Sylvania Lamp and Ballast Catalog - Osram Sylvania
BULB IDENTIFICATION Light Center Length (L.C.L.) is the distance from the center of the light source to the following point for the base used: Screw bases...bottom base contact; Bayonet candelabra and medium bayonet...top of base pins. BASE IDENTIFICATION Typical bases are shown. One lead-in wire is soldered to the center contact and the other soldered or welded to the upper rim of the base shell. Base shells are typically made of brass or aluminum. ANSI designations are in parentheses. FILAMENT IDENTIFICATION A FILAMENT designation consists of a prefix letter to indicate whether the wire is straight or coiled, and a number to indicate the arrangement of the filament on the supports. Prefix letters include: C (coiled) --wire is wound into a helical coil or it may be deeply fluted; CC (coiled coil)--wire is wound into a helical coil and this coiled wire again wound into a helical coil. ADDITIONAL INFORMATION Lamps Listed 115-125 volts (design voltage 120), 120-130 volts (design voltage 125), 125-130 volts (design voltage 130) and 230- 250 volts (design voltage 240) are intended for use on circuits normally varying within these voltage limits. Candelabra cand. (E12) C-8 CC-8 Intermediate Inter. (E17) Ext. Mogul End Prong GX16d C-11V C-11 CC-11 C-5 Bulb size - Max. Diameter (Divide by 8) A-21 - 21⁄8 = 2 5⁄8” Dia. G-40 - 40⁄8 = 5” Dia. T-12 - 12⁄8 = 1 1⁄2” Dia. PS-30 - 30⁄8 = 3 3⁄4” Dia. Finishes W or SW - Soft White DAY - Daylight ® Y - Yellow B - Blue R - Red G - Green A - Amber IC - Iridescent clear FL - Flood SP - Spot IF - Inside frost AIC - Amber iridescent clear For more complete product information visit www.sylvania.com Symbols/Footnotes on page 35-39 3 C-9 CC-9 Medium (E26) & Medium Brass (E26) Mogul Screw 3 Contact Mogul Double Contact S14s Mogul End Prong Med Side Pr. Screw Terminal Bayonet D.C. Bay (BA15D) G53 C-6 CC-6 3 Contact Medium 3 C Med (E26D) C-2V CC-2V C-2R Medium Skirted Med. Skirt (E26/50x39) C-7A CC-7A I N CA N D ESCE N T
I N CA N D ESCE N T INCANDESCENT LAMP SHAPES A bulb designation consists of a letter(s) to indicate the shape and a figure(s) to indicate the approximate major diameter in eighths of in inch. For example, an F-15 bulb is a flame-shape, 15/8 of an inch or 1-7/8 inches in diameter. B10 Blunt Tip B10 Crystal T6 Cand BR30 Med BR40 Med P25 Med PS25 3C Mog PAR46 Med Sid Pr T6.5 Inter T6.5 DC Bay A15 Med A17 Med A19 Med A21 Med A21 3C Med A23 Med B10 Cand B13 Cand F15 Med C7 Cand C7 DC Bay C15 Med CA G16.5 Cand G16.5 Med G25 Med G30 Med LINESTRA 2-base ER30 Med PS25 Med PS30 Med PS35 Mog PAR56 Scrw Trm S6 Cand T7 Cand T7 DC Bay T7 Inter T8 Cand T8 DC Bay ER40 Med PAR56 Mog End Pr S6 DC Bay T8 Inter T10 Med S11 Cand S11 DC Bay S11 Inter S11 Med S14 Med R14 Inter R14 Med R16 Med K19 Med R20 Med R40 Med Skrt PAR46 Scrw Trm For more complete product information visit www.sylvania.com Symbols/Footnotes on page 35-39 4 PAR38 Med Skrt PAR38 Med Sid Pr R40 Mog G40 Med R40 Med PAR46 Mog End Pr PAR64 Scrw Trm PAR64 Ex Mog End Pr S 19 Med
- Page 1 and 2: www.sylvania.com Lamp and Ballast C
- Page 3 and 4: A Lighting Industry Leader With ove
- Page 5 and 6: Luminance Contrast The relationship
- Page 7 and 8: ECOLOGIC ® products are the indust
- Page 9 and 10: Energy and the Cost of Lighting Acc
- Page 11 and 12: 2006 Progress Report OSRAM SYLVANIA
- Page 13 and 14: Energy A measure of work done by an
- Page 15: I N CA N D ESCE N T LAMP CATEGORIES
- Page 19 and 20: I N CA N D ESCE N T NOTES: For more
- Page 21 and 22: I N CA N D ESCE N T A19 BR40 C7 Can
- Page 23 and 24: I N CA N D ESCE N T A15 A19 B10 B13
- Page 25 and 26: I N CA N D ESCE N T S11 C7 Candelab
- Page 27 and 28: I N CA N D ESCE N T T10 A15 A21 R20
- Page 29 and 30: I N CA N D ESCE N T R14 R16 S11 T6.
- Page 31 and 32: I N CA N D ESCE N T R20 A19 A15 GEN
- Page 33 and 34: I N CA N D ESCE N T C15 K19 T10 BR3
- Page 35 and 36: I N CA N D ESCE N T A19 A21 BR38 BR
- Page 37 and 38: I N CA N D ESCE N T A19 A21 A23 BR3
- Page 39 and 40: I N CA N D ESCE N T A21 A23 BR38 PA
- Page 41 and 42: I N CA N D ESCE N T R40 BR40 PAR56
- Page 43 and 44: I N CA N D ESCE N T B10 C11 F15 G16
- Page 45 and 46: I N CA N D ESCE N T G16.5 G25 G30 G
- Page 47 and 48: I N CA N D ESCE N T PS25 PS35 A19 A
- Page 49 and 50: I N CA N D ESCE N T SYMBOLS & FOOTN
- Page 51 and 52: I N CA N D ESCE N T SYMBOLS & FOOTN
- Page 53 and 54: I N CA N D ESCE N T Manufacturers
- Page 55 and 56: T U N G STE N H AL O G E N FILAMENT
- Page 57 and 58: T U N G STE N H AL O G E N TUNGSTEN
- Page 59 and 60: T U N G STE N H AL O G E N BT15 B11
- Page 61 and 62: T U N G STE N H AL O G E N PAR16 GU
- Page 63 and 64: T U N G STE N H AL O G E N PAR30 PA
- Page 65 and 66: T U N G STE N H AL O G E N PAR38 CA
I<br />
N CA<br />
N<br />
D ESCE<br />
N T<br />
INCANDESCENT LAMP SHAPES<br />
A bulb designation consists of a letter(s) to indicate the shape <strong>and</strong><br />
a figure(s) to indicate the approximate major diameter in eighths of<br />
in inch. For example, an F-15 bulb is a flame-shape, 15/8 of an<br />
inch or 1-7/8 inches in diameter.<br />
B10 Blunt Tip B10 Crystal<br />
T6 C<strong>and</strong><br />
BR30 Med BR40 Med<br />
P25 Med PS25 3C<br />
Mog<br />
PAR46 Med<br />
Sid Pr<br />
T6.5 Inter<br />
T6.5 DC Bay<br />
A15 Med A17 Med A19 Med A21 Med A21 3C Med A23 Med<br />
B10 C<strong>and</strong> B13 C<strong>and</strong> F15 Med C7 C<strong>and</strong> C7 DC Bay C15 Med CA G16.5 C<strong>and</strong> G16.5 Med G25 Med G30 Med<br />
LINESTRA 2-base<br />
ER30 Med<br />
PS25 Med PS30 Med PS35 Mog<br />
PAR56 Scrw Trm<br />
S6 C<strong>and</strong><br />
T7 C<strong>and</strong> T7 DC Bay T7 Inter T8 C<strong>and</strong> T8 DC Bay<br />
ER40 Med<br />
PAR56 Mog<br />
End Pr<br />
S6 DC Bay<br />
T8 Inter T10 Med<br />
S11 C<strong>and</strong> S11 DC Bay S11 Inter S11 Med S14 Med<br />
R14 Inter R14 Med R16 Med<br />
K19 Med R20 Med<br />
R40 Med Skrt<br />
PAR46 Scrw Trm<br />
For more complete product information visit www.sylvania.com Symbols/Footnotes on page 35-39<br />
4<br />
PAR38 Med<br />
Skrt<br />
PAR38 Med<br />
Sid Pr<br />
R40 Mog<br />
G40 Med<br />
R40 Med<br />
PAR46 Mog<br />
End Pr<br />
PAR64 Scrw Trm PAR64 Ex Mog<br />
End Pr<br />
S 19 Med