Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10. Driver and Firmware<br />
10.1 Driver Installation<br />
After the PCI card has been installed correctly (see 5. Hardware Installation), and the computer<br />
has been switched on, Windows will recognize the new hardware component and start its<br />
‘Hardware Wizard’. Insert the <strong>RME</strong> Driver CD into your CD-ROM drive, and follow further instructions<br />
which appear on your computer screen. The driver files are located in the directory<br />
\H<strong>DSP</strong>_w2k on the <strong>RME</strong> Driver CD.<br />
Windows will install the Hammerfall <strong>DSP</strong> <strong>System</strong> driver, and will register the card in the system<br />
as a new audio device. After a reboot the H<strong>DSP</strong> <strong>9652</strong> is ready for use.<br />
In case the warning messages 'Digital signature not found', 'Do not install driver', 'not certified<br />
driver' or similar come up: Don't listen to Microsoft, listen to us and continue with the installation.<br />
12<br />
In case the Hardware Wizard does not show up automatically after installation of the card,<br />
do not attempt to install the drivers manually! An installation of drivers for non-recognized<br />
hardware will cause a blue screen when booting Windows!<br />
10.2 Driver Update<br />
<strong>RME</strong>'s driver updates often include a new hdsp32.inf file. Also the revision number of the<br />
hardware might change (after a flash update). To prevent Windows 2000/XP from using an old<br />
hdsp32.inf, or to copy some of the old driver files, be sure NOT to let Windows search for the<br />
driver! Instead tell Windows what to do.<br />
Under >Control Panel /<strong>System</strong> /Device Manager /Sound, Video and Game Controllers /<strong>RME</strong><br />
Hammerfall <strong>DSP</strong> /Properties /Driver< you'll find the 'Update Driver' button. Select 'Install from<br />
a list or specific location (advanced)', click 'Next', select 'Don't search I will choose the<br />
driver to install', click 'Next', then 'Have Disk'. Now point to the driver update's directory.<br />
10.3 Deinstalling the Drivers<br />
A deinstallation of the H<strong>DSP</strong>'s driver files is not necessary – and not supported by Windows<br />
anyway. Thanks to full Plug & Play support, the driver files will not be loaded after the hardware<br />
has been removed. If desired these files can then be deleted manually.<br />
Unfortunately Windows Plug & Play methods do not cover the additional autorun entries of<br />
TotalMix, the Settings dialog, and the registration of the ASIO driver. Those entries can be<br />
removed from the registry through a software deinstallation request. This request can be found<br />
(like all deinstallation entries) in Control Panel, Software. Click on the entry '<strong>RME</strong> Hammerfall<br />
<strong>DSP</strong>'.<br />
User's Guide H<strong>DSP</strong> <strong>System</strong> H<strong>DSP</strong> <strong>9652</strong> © <strong>RME</strong>
Change language