ingersoll rand aro compact series - ToolSmith

INGERSOLL RAND ARO MINI SERIES
COMPONENTS AND ACCESSORIES
104263
104262
104254-1
104253-1
Dimensions –
in (mm)
Dimensions –
in (mm)
INGERSOLL RAND • FILTERS, REGULATORS, AND LUBRICATORS (FRLs) | 81
MODULAR CLAMP KIT
One clamp kit is required to connect any two units or accessories together in the modular
format. Kit includes two clamps, one O-ring, and screws. To assemble, simply put the
O-ring and clamp between the units and tighten screws for a secure seal.
Part Number Description
104263 Clamp kit (fits all port sizes)
T-TYPE WALL MOUNTING BRACKETS
These brackets provide easy wall mounting. They are excellent for mounting a single
unit or multiple units in the modular arrangement. T-type mount gives good wall-to-unit
clearance for installing fittings and other connections. Kit includes a bracket, clamp, two
screws, and O-ring.
Part Number Description
104262 T-type wall mounting bracket kit (fits all port sizes)
MODULAR MANIFOLD KIT
The manifold block is an excellent way to provide circuit design flexibility. The manifold has
two 1/8" NPT ports which allow for clean, regulated air to be sent to signal or run other
equipment. Kit includes manifold only. Order 104263 clamp kits as needed.
Part Number Description
104254-1 1/8" Modular manifold kit
104254-2 1/4" Modular manifold kit
LOCK-OUT, 3-WAY SHUT-OFF VALVE
Meets OSHA regulation 1910.147. This lock-out valve provides a safety lock-out to prevent
accidental machine start-up. When slider valve is shifted into the lock-out position, inlet air
is blocked and downstream air is exhausted to the atmosphere. Unit has threaded ports for
plumbing directly to an air line or can be mounted in the modular arrangement. Order
104263 clamp kits as needed.
Part Number Description
104253-1 1/8" NPT ports lock-out, 3-way shut-off valve
104253-2 1/4" NPT ports lock-out, 3-way shut-off valve
irtools.com • (800) 376-TOOL