ingersoll rand aro compact series - ToolSmith
ingersoll rand aro compact series - ToolSmith
ingersoll rand aro compact series - ToolSmith
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
64 | INGERSOLL RAND • FILTERS, REGULATORS, AND LUBRICATORS (FRLs)<br />
INGERSOLL RAND HAS THE RIGHT COMBINATION<br />
Proper conditioning of compressed air is essential to ensure maximum performance and service life from pneumatic power tools and<br />
equipment. The small initial investment for installation of air preparation units in an air line system will pay long-term dividends in increased<br />
productivity, consistent quality, and decreased maintenance costs. Ingersoll Rand offers an extensive line of air line filters, regulators, and<br />
lubricators, including individual units, piggybacks, and combos, to meet your exact air preparation requirements.<br />
Filters<br />
Regulators<br />
Lubricators<br />
irtools.com • (800) 376-TOOL<br />
Filters<br />
Ingersoll Rand compressed air filters are designed to remove solid and liquid airborne<br />
contaminants that can plug small orifices and hinder performance, or cause excessive wear and<br />
premature equipment failure. Several filter elements are offered, including models with coalescing<br />
elements for removal of oil aerosols and particles down to .3 micron.<br />
• Pipe sizes from 1/8" to 2" NPT<br />
• Flows to 1,400 cfm (660 dm3 /s)<br />
• Maximum inlet pressures to 250 psig (17 bar)<br />
Regulators<br />
Ingersoll Rand air line regulators provide controlled, consistent air pressure as required for specific<br />
pneumatic equipment connected to the air system. Standard relieving-type regulators are offered<br />
in a variety of adjustable pressure ranges, with convenient spring options for easy conversion<br />
should requirements change. Non-relieving models are also offered for applications where the<br />
venting of downstream overpressure is undesirable. A Mini Series regulator is available for<br />
fluid applications.<br />
• Pipe sizes from 1/8" to 2" NPT<br />
• Flows to 1,200 cfm (566 dm3 /s)<br />
• Maximum inlet pressures to 300 psig (21 bar)<br />
Lubricators<br />
Ingersoll Rand fog-type lubricators help ensure that pneumatic devices receive the required<br />
lubrication to maintain operating performance, reduce wear, and prolong service life. They<br />
are designed to provide the correct amount of oil required for most general applications in a<br />
pneumatic system, delivering a constant ratio of oil to cfm. Precise oil feed adjustment allows<br />
the proper oil delivery rate. Lubricators should be installed close to the downstream application<br />
to ensure effective distribution of oil to pneumatic components.<br />
• Pipe sizes from 1/8" to 2" NPT<br />
• Flows to 1,186 cfm (560 dm3 /s)<br />
• Maximum inlet pressures to 250 psig (17 bar)