ingersoll rand aro compact series - ToolSmith
ingersoll rand aro compact series - ToolSmith
ingersoll rand aro compact series - ToolSmith
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
102 | INGERSOLL RAND • FILTERS, REGULATORS, AND LUBRICATORS (FRLs)<br />
INGERSOLL RAND ARO COMPACT SERIES<br />
ACCESSORIES<br />
Wall Mounting Kit<br />
104172<br />
Modular Manifold Block Kit<br />
104170<br />
irtools.com • (800) 376-TOOL<br />
104172<br />
Safety Shut-off, Lock-out Valve<br />
104170<br />
Shown in modular arrangement with<br />
Module / Air 2000 FRL.<br />
Manifold creates four additional<br />
1/4" NPT outlet ports<br />
PERFORMANCE SPECIFICATIONS<br />
Max Inlet 175 psig (12 bar)<br />
Max Temp 0° – 125° F (-18° – 52° C)<br />
Body Zinc die-cast<br />
Seals Buna-N<br />
Slide Delrin<br />
DIMENSIONAL DATA<br />
Dimensions – in (mm)<br />
2.6<br />
(67)<br />
2.4<br />
(60)<br />
2.5<br />
(63)<br />
.70<br />
(18)<br />
1.6<br />
(40)<br />
2.54<br />
(65)<br />
5/16 (8)<br />
DIAMETER HOLE<br />
Part Number Description<br />
Wall Mounting Kit<br />
104172 Wall mounting kit<br />
May be used to mount FRL combo units which include a regulator,<br />
Piggyback Filter / Regulator units, or individual regulators. Kit includes<br />
part number 29623 bracket and part number 104173 panel mounting<br />
nut. Bracket and nut may be ordered individually.<br />
Part Number Description<br />
Modular Manifold Block Kit<br />
104170 Modular manifold block kit<br />
This manifold can be installed before or after any unit in the modular<br />
arrangement, providing four additional 1/4" NPT ports for greater<br />
circuit design flexibility. When installed between the regulator and<br />
lubricator, clean, regulated air can be used to signal other equipment.<br />
Kit includes manifold, two spacers, three pipe plugs, four clamps,<br />
and O-rings.<br />
Part Number<br />
Safety Shut-off, Lock-out Valves<br />
Description<br />
104174-2 Threaded 1/4" NPT<br />
104174-3 Threaded 3/8" NPT<br />
104174-4 Threaded 1/2" NPT<br />
100085 Lock-out hasp<br />
Valves meet OSHA Lock-out / Tag-out regulation 1910.147. Exhausttype<br />
safety shut-off valves can be used in the modular arrangement<br />
or in-line, depending on application requirements. The safety shut-off<br />
valve should be installed upstream from the FRL unit. It is excellent<br />
for isolating and depressurizing a downstream unit requiring<br />
maintenance. The valve operates by pushing the lever down (closed<br />
position), exhausting downstream air. The valve may be locked in the<br />
exhausted position. When using the valve in the modular format, it is<br />
secured to the unit with a modular spacer or T-type modular bracket.<br />
Part Number 100085<br />
Lock-out hasp<br />
(order separately)<br />
Shown as<br />
individual unit.<br />
104174-X<br />
Shown in open position<br />
3<br />
2<br />
1<br />
3 Port - 2 Position<br />
NOTE: ARO Safety Lock-out Valves meet OSHA<br />
Lock-out / Tag-out regulation 1910.147,<br />
which requires protection from unexpected<br />
start-up of a machine during service or<br />
maintenance.
Change language