Voltage References

MOTOROLA
SEMICONDUCTOR-----­
TECHNICAL DATA
TV COLOR PROCESSOR
This device will accept a PAL or NTSC composite video signal and output the
three color signals, needing only a simple driver amplifier to interface to the picture
tube. The provision of high bandwidth on-screen display inputs makes it
suitable for text display, TV games, cameras, etc. The TDA3301 B has user controllaws,
and also a phase shift control which operates in PAL, as well as NTSC.
• Automatic Black Level Setup
• Beam Current Limiting
• Uses Inexpensive 4.43 MHz to 3.58 MHz Crystal
• No Oscillator Adjustment Required
• Three OSD Inputs Plus Fast Blanking Input
• Four DC, High Impedance User Controls
• Interfaces with TDA33030B SECAM Adaptor
• Single 12 V Supply
• Low Dissipation, Typically 600 mW
Chroma Input
ACC Capacitor
Chroma DL Driver, Emitter
Chroma DL Driver, Collector
Saturation Control
Identification Capacitor
V Input
U Input
90° Loop Capacitor
Oscillator Loop Filer
Crystal Drive
Drystal Feedback
Ground
Blue Output
Blue Output Clamp Capacttor
Blue Output Feedback
Green Output
Green Output Clamp Capacitor
Green Output Feedback
Red Output
PIN CONNECTIONS
Hue Control/NTSC Switch
+ t2V
Ground
1.0 V Composite Video Input
Delayed Luma input
Luma DL Drive and 3.0 Inverted Output
Luma Emitter Load
Luma Collector Load
Contrast Control
Black Level Clamp
Brightness Control
Peak Beam Umit Adjust
Frame Pulse Input
Sandcastle Pulse Input
OSD Input Green
OSD Input Red
OSD Input Blue
OSD Input Fast Blanking
Red Output Feedback
Red Output Clamp Capacitor
MOTOROLA LINEAR/INTERFACE ICs DEVICE DATA
9-300
TDA33018
TV COLOR PROCESSOR
SILICON MONOLITHIC
INTEGRATED CIRCUIT
PSUFFIX
PLASTIC PACKAGE
CASE 711