WORKMANSHIP STANDARD WS011 - L-3 Communications
WORKMANSHIP STANDARD WS011 - L-3 Communications
WORKMANSHIP STANDARD WS011 - L-3 Communications
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>WORKMANSHIP</strong> <strong>STANDARD</strong> WS005<br />
Radio Frequency (RF) Assembly 4.2.1<br />
Flexible and Reformable Coax Cable<br />
Routing<br />
Target<br />
Bend radius is uniform with a constant cable<br />
diameter maintained.<br />
No evidence of wrinkles in the bend area.<br />
No damage to the insulation<br />
Inside bend radii for coaxial cable is equal to or<br />
greater than 5 times the coax cable diameter<br />
including insulation.<br />
Note: Large bend radii are always preferred.<br />
12-16-2004 Page 1 of 4 WS-005-4.2.1<br />
Printed version of this document may be obsolete. Verify revision and issue date against the on-line system.
<strong>WORKMANSHIP</strong> <strong>STANDARD</strong> WS005<br />
Radio Frequency (RF) Assembly 4.2.1<br />
Flexible and Reformable Coax Cable<br />
Routing<br />
A<br />
Defect<br />
Bend radius is less than 2 times the coax cable<br />
diameter minimum including insulation.<br />
Insert (inside bend radius).<br />
Insulation is wrinkled, cracked or torn.<br />
.<br />
Defect<br />
A. Insulation damage.<br />
Cable diameter is distorted.<br />
Insulation is wrinkled, cracked or torn.<br />
.<br />
12-16-2004 Page 2 of 4 WS-005-4.2.1<br />
Printed version of this document may be obsolete. Verify revision and issue date against the on-line system.
<strong>WORKMANSHIP</strong> <strong>STANDARD</strong> WS005<br />
Radio Frequency (RF) Assembly 4.2.1 (cont.)<br />
Flexible and Reformable Coax Cable<br />
Routing<br />
Acceptable<br />
Flexible coax cabling has been routed with<br />
bend radius that will not cause damage to<br />
the cables.<br />
Inside bend radius for coaxial cable is<br />
greater than 2 times the coax cable<br />
diameter minimum including insulation.<br />
12-16-2004 Page 3 of 4 WS-005-4.2.1<br />
Printed version of this document may be obsolete. Verify revision and issue date against the on-line system.
<strong>WORKMANSHIP</strong> <strong>STANDARD</strong> WS005<br />
Radio Frequency (RF) Assembly 4.2.1<br />
Flexible and Reformable Coax Cable<br />
Routing<br />
Defect – Class 1,2,3<br />
Inside bend Radius is less than 2 times the<br />
coax cable diameter including insulation.<br />
Wrinkles or cracks are discernable.<br />
12-16-2004 Page 4 of 4 WS-005-4.2.1<br />
Printed version of this document may be obsolete. Verify revision and issue date against the on-line system.
Change language