Indoor Unit Outdoor Unit CS-E9NKUAW CS ... - Panasonic
Indoor Unit Outdoor Unit CS-E9NKUAW CS ... - Panasonic
Indoor Unit Outdoor Unit CS-E9NKUAW CS ... - Panasonic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Press Auto OFF/ON button to toggle remote control receiving sound.<br />
- Short “beep”: Turn OFF remote control receiving sound.<br />
- Long “beep”: Turn ON remote control receiving sound.<br />
After Auto OFF/ON button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON<br />
Mode is restarted.<br />
15.2 Remote Control Button<br />
15.2.1 SET Button<br />
� To check remote control transmission code and store the transmission code to EEPROM<br />
o Press “Set” button continuously for 10 seconds by using pointer<br />
o Press “Timer Set” button unit a “beep” sound is heard as confirmation of transmission code change.<br />
15.2.2 RESET (RC)<br />
� To clear and restore the remote control setting to factory default.<br />
o Press once to clear the memory<br />
15.2.3 RESET (AC)<br />
� To restore the unit’s setting to factory default.<br />
o Press once to restore the unit’s setting<br />
15.2.4 TIMER ▲<br />
� To change indoor unit indicator’s LED intensity:<br />
o Press continuously for 5 seconds.<br />
15.2.5 TIMER ▼<br />
� To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)<br />
o Press continuously for 10 seconds.<br />
15.2.6 CLOCK Button<br />
� To change the remote control time format:<br />
o Press for more than 5 seconds<br />
42