TachyCAD in general - download - Kubit GmbH
TachyCAD in general - download - Kubit GmbH
TachyCAD in general - download - Kubit GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TachyCAD</strong> 10.0<br />
What‘s new?<br />
Release May 2012<br />
Software for survey<strong>in</strong>g and as-built documentation
Index<br />
� General <strong>in</strong>novations<br />
� Compatibility<br />
� New functions<br />
� Supported sensors<br />
� Improved functions<br />
� <strong>TachyCAD</strong> Topography – new vertical solution<br />
� <strong>TachyCAD</strong> Archaeology<br />
� New functions<br />
� Feature Data Management improvements<br />
� <strong>TachyCAD</strong> Build<strong>in</strong>g survey<strong>in</strong>g<br />
� New functions<br />
Miscellaneous<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 2
General <strong>in</strong>novations - Compatibility<br />
Operat<strong>in</strong>g systems:<br />
� all 32 bit - and 64 bit – versions of W<strong>in</strong>dows 7, Vista and XP<br />
AutoCAD compatibility:<br />
� Support of AutoCAD 2013 and AutoCAD LT 2013<br />
� Support of all Autodesk products bas<strong>in</strong>g on AutoCAD,<br />
e.g.<br />
− Architecture 2013<br />
− Civil 3D 2013<br />
� Support of older AutoCAD / AutoCAD LT versions start<strong>in</strong>g<br />
with the 2010 version<br />
� A previous version can be provided for older systems<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 3
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – New functions<br />
Measur<strong>in</strong>g hidden po<strong>in</strong>ts<br />
� This command enables the calibration of po<strong>in</strong>ts<br />
which are hidden and can not be aimed for<br />
directly.<br />
� A special measurement pole with two or three<br />
measur<strong>in</strong>g marks will be place on the measur<strong>in</strong>g<br />
po<strong>in</strong>t. The marks will be po<strong>in</strong>ted at and<br />
<strong>TachyCAD</strong> calculates the coord<strong>in</strong>ates of the<br />
pole tip from the measurement data.<br />
Typical applications:<br />
•Po<strong>in</strong>ts underneath duct covers<br />
•Corners of houses, curb stones, end<br />
po<strong>in</strong>ts beh<strong>in</strong>d hedges and <strong>in</strong> the<br />
bushes<br />
•Po<strong>in</strong>ts beh<strong>in</strong>d ledges or with<strong>in</strong><br />
niches<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 4
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – New functions<br />
3D distance dimension<br />
The three-dimensional distance of two po<strong>in</strong>ts<br />
with<strong>in</strong> space can be determ<strong>in</strong>ed and<br />
dimensioned with this command. The 3D<br />
dimension<strong>in</strong>g automatically adapts to the current<br />
view, so that the distance dimension can always<br />
be read clearly.<br />
The 3D dimension<strong>in</strong>g is <strong>in</strong>tended for the fast<br />
determ<strong>in</strong>ation of distances and the presentation of<br />
spatial data.<br />
No matter from which direction you look on<br />
the 3D model – you will always be able to<br />
read the distance dimension<strong>in</strong>g.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 5
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – New functions<br />
Toolbar for pen operation<br />
This command makes the work with a tablet PC<br />
easier. Especially for command l<strong>in</strong>e commands you<br />
can avoid needless clicks.<br />
The buttons replace frequently used keyboard entries<br />
and make the access to frequently used AutoCAD<br />
functions easier.<br />
� Enter key � e.g. f<strong>in</strong>ish command, call up command aga<strong>in</strong><br />
� ESCAPE key � e.g. cancel command, deselection of objects<br />
� Fad<strong>in</strong>g <strong>in</strong> navigation wheel � access to zoom, pan, 3D orbit functions<br />
� .xy � enter position (X and Y) and height (Z) of a po<strong>in</strong>t separately<br />
� View top� switches the draw<strong>in</strong>g view to “plan view”, so that you will look<br />
on the XY plane from above<br />
� 3D poly l<strong>in</strong>e � often used command for the calibration of curved l<strong>in</strong>es <strong>in</strong><br />
space, can only be reached <strong>in</strong>tricately via the pure AutoCAD menu<br />
Available as<br />
classical tool bar or<br />
as ribbon group<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 6
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – New functions<br />
3D model<strong>in</strong>g with kubit planes<br />
The "Intersection l<strong>in</strong>es (3 planes)" command generates a spatial trihedron.<br />
Therefore <strong>in</strong>tersection po<strong>in</strong>t and <strong>in</strong>tersect<strong>in</strong>g l<strong>in</strong>es of the three selected planes are visible.<br />
The command makes the generation of 3D wire frame models by means of planes easier.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 7
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – New functions<br />
Technical data/area data/feature data:<br />
Object collector with export option<br />
The object collector is a temporary "conta<strong>in</strong>er" where you can collect objects for the<br />
conjo<strong>in</strong>t edit<strong>in</strong>g.<br />
It is now possible to export these objects all together <strong>in</strong>to a text file (ASCII table).<br />
An example:<br />
A list of all trees with a height of 15<br />
meters is to be generated.<br />
In order to do so the follow<strong>in</strong>g<br />
object collector will be generated.<br />
With<strong>in</strong> this object collector all trees<br />
with the "Height" = 15 attribute were<br />
filtered out.<br />
With the regular table export<br />
function these trees will now be<br />
written <strong>in</strong>to a text file.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 8
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – Supported sensors<br />
Support of Leica 3D Disto:<br />
� <strong>TachyCAD</strong> supports the new Leica sensor:<br />
� Motorized, reflector less work<strong>in</strong>g coord<strong>in</strong>ate measurement device<br />
� Optimized for <strong>in</strong>terior measurements and close range<br />
� Po<strong>in</strong>t<strong>in</strong>g via visible laser po<strong>in</strong>t or video image transmission<br />
� Remote control for the position<strong>in</strong>g of the target po<strong>in</strong>t<br />
Wireless<br />
connection via<br />
WLAN<br />
Control via video<br />
image on the<br />
computer<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 9
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – Supported sensors<br />
Support of motorization for Topcon<br />
Tachymeter<br />
� One-man operation with prism track<strong>in</strong>g<br />
� Motorized stake out<br />
� Automatic approach via certa<strong>in</strong> po<strong>in</strong>ts for the orientation<br />
Support of the follow<strong>in</strong>g Topcon devices<br />
�IS<br />
�GPT800/800A/8000/8000A<br />
�GPT 900/900A/9000/9000A0<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 10
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – Improvement of functions<br />
Revision of the <strong>in</strong>strument selection<br />
dialog<br />
� Better descriptions make it easier to f<strong>in</strong>d the<br />
correct sett<strong>in</strong>g<br />
� Updated overview on the supported<br />
<strong>in</strong>strument series<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 11
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – Improvement of functions<br />
Cyl<strong>in</strong>der unroll<strong>in</strong>g with dialog field control<br />
� Many options for the unroll<strong>in</strong>g of geometry<br />
� Clarity via outl<strong>in</strong>es<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 12
<strong>TachyCAD</strong> <strong>in</strong> <strong>general</strong> – Improvement of functions<br />
Motorized stake out as one-man<br />
operation with Trimble (TSM Pipe):<br />
� The track light is helpful for the rough self<br />
orientation <strong>in</strong>to the target beam<br />
� This may now be switched on directly with<strong>in</strong><br />
the stake out dialog.<br />
The Trimble functions<br />
dialog will open when<br />
click<strong>in</strong>g on this<br />
button…<br />
…via which the track<br />
light can be activated.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 13
<strong>TachyCAD</strong> Topography – New vertical solutions<br />
Now <strong>TachyCAD</strong> is available for the outdoors:<br />
The new vertical solution <strong>TachyCAD</strong> Topography has been matched to the requirements of<br />
the measur<strong>in</strong>g of outside facilities.<br />
For all <strong>TachyCAD</strong> vertical solutions the pr<strong>in</strong>cipal mode of operation is the same:<br />
Measur<strong>in</strong>g and draw<strong>in</strong>g will be done <strong>in</strong> one work step, the CAD plans are generated on site.<br />
A number of commands are universal so that they can be found <strong>in</strong> all <strong>TachyCAD</strong> vertical<br />
solutions. Among those are<br />
� Commands for the actuation of the tachymeter (e.g. <strong>in</strong>strument sett<strong>in</strong>g, measurement<br />
box…)<br />
� Commands for the orientation(generate/measure control po<strong>in</strong>ts, generate/check<br />
orientation…)<br />
� Additional measurement methods (stake out, <strong>in</strong>tersection)<br />
� General geometry measurement commands (circle, rectangle, special<br />
(poly)l<strong>in</strong>es, elevation spots etc.)<br />
� General construction commands (spatial jo<strong>in</strong>/crop, tie distances, create UCS…)<br />
� Command for the edit<strong>in</strong>g of the draw<strong>in</strong>g (e.g. flatten, <strong>TachyCAD</strong> clipboard, export /<br />
import po<strong>in</strong>ts)<br />
The differences of the vertical solutions are the details and they are oriented at the<br />
specific subtasks and work<strong>in</strong>g conditions of the different branches.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 14
<strong>TachyCAD</strong> Topography – New vertical solutions<br />
Typical topography commands are:<br />
� Trimble RTK-GPS: The GPS coord<strong>in</strong>ates are<br />
transferred to AutoCAD on site<br />
� Cont<strong>in</strong>ue polyl<strong>in</strong>es (Makes the measurement of<br />
several polyl<strong>in</strong>es at the same time possible, e.g. for<br />
the measurement of routes.)<br />
� Measur<strong>in</strong>g hidden po<strong>in</strong>ts (Indirect determ<strong>in</strong>ation<br />
of po<strong>in</strong>ts with the help of a special measur<strong>in</strong>g<br />
pole.)<br />
� Determ<strong>in</strong>ation of po<strong>in</strong>ts with <strong>in</strong>tersection<br />
(Measur<strong>in</strong>g of far away po<strong>in</strong>ts, where a distance<br />
measurement is not possible.)<br />
� Measurements <strong>in</strong> one-man operations (Robotic<br />
tachymeter is remote controlled by <strong>TachyCAD</strong>.)<br />
� support of Leica, Trimble, Topcon<br />
� Additional object data record<strong>in</strong>g with hylasFM,<br />
e.g. for green spaces<br />
� Symbol and l<strong>in</strong>e type library for signatures<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 15
<strong>TachyCAD</strong> Topography – Symbol and l<strong>in</strong>e type library<br />
� Tool bar with blocks for topographic symbols and<br />
l<strong>in</strong>e styles for l<strong>in</strong>e signatures<br />
� Usage of dynamic blocks for additional<br />
functionality<br />
� Easily extendable through drag & drop<br />
e.g. s<strong>in</strong>gle tree symbol: Tree top and<br />
trunk diameter can be changed<br />
dynamically. The attribute description<br />
will be adapted automatically.<br />
The appearance of the<br />
blocks can be switched<br />
from conifer tobroadleaf<br />
and vice versa.<br />
e.g. coord<strong>in</strong>ate dimension<strong>in</strong>g: X and<br />
Y value of the <strong>in</strong>sertion po<strong>in</strong>t will<br />
automatically be displayed.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 16
<strong>TachyCAD</strong> Topography - Object data entry outside facilities<br />
� Additional object data collection with hylasFM, e.g. for green spaces<br />
� Data base compatible record<strong>in</strong>g of alphanumeric <strong>in</strong>formation, l<strong>in</strong>ked to graphic<br />
� Object data will be displayed directly <strong>in</strong> AutoCAD, <strong>in</strong> a clearly arranged structure view<br />
� Can be flexibly adapted to any content<br />
� Export of data as text tables, Excel lists, ESRI Shape files (for GIS), XML or HTML<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 17
<strong>TachyCAD</strong> Archaeology – New functions<br />
GIS export for feature data<br />
� The objects, recorded with the MonuMap feature data management may be<br />
exported to ESRI Shape files. That way they can be imported <strong>in</strong>to many GIS systems.<br />
� The vertical solution <strong>TachyCAD</strong> Topography has also the Shape export function.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 18
<strong>TachyCAD</strong> Build<strong>in</strong>g survey – New functions<br />
Manual measurement with logg<strong>in</strong>g<br />
� With<strong>in</strong> the draw<strong>in</strong>g a dimension<strong>in</strong>g arrow will be added to every distance measured<br />
with a laser distance meter. That way it is documented at which po<strong>in</strong>ts has been<br />
measured and at which has not been measured.<br />
� The dimension<strong>in</strong>g will be <strong>in</strong>serted on a predef<strong>in</strong>ed layer, which may be switched on or<br />
off at any time.<br />
A dimension<strong>in</strong>g arrow<br />
has been added to<br />
every measured<br />
distance.<br />
If the layer is switched off<br />
the dimension<strong>in</strong>g will be<br />
added but it does not<br />
disturb the picture with<strong>in</strong><br />
the draw<strong>in</strong>g<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 19
<strong>TachyCAD</strong> – Other improvements<br />
Improved switch over between hylasFM/<strong>TachyCAD</strong>/MonuMap<br />
� The know-how of the data structur<strong>in</strong>g of hylasFM has flown <strong>in</strong>to the different kubit<br />
products:<br />
− Area record<strong>in</strong>g <strong>in</strong> <strong>TachyCAD</strong> Build<strong>in</strong>g Survey and Plant Survey<br />
− Feature management <strong>in</strong> <strong>TachyCAD</strong> Archaeology<br />
− Object data management <strong>in</strong> <strong>TachyCAD</strong> Topography<br />
− Damage mapp<strong>in</strong>g <strong>in</strong> MonuMap<br />
− Tagg<strong>in</strong>g <strong>in</strong> Po<strong>in</strong>tSensePlant<br />
� Only one of these options can be active at a time. If you use several of these products<br />
at the same time with<strong>in</strong> one AutoCAD, you will have to switch between the products <strong>in</strong><br />
order to be able to use the correct structure view.<br />
� There is the new command for this:<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 20
<strong>TachyCAD</strong> – Other improvements<br />
<strong>TachyCAD</strong> protocol file with new<br />
options<br />
� Stake out: stake out po<strong>in</strong>ts can be<br />
logged<br />
�is activated with<strong>in</strong> the <strong>TachyCAD</strong><br />
sett<strong>in</strong>gs dialog<br />
� Orientation: The details of the calculated<br />
scale and the <strong>in</strong>formation, whether the<br />
scale factor has been used will now be<br />
easier to understand when displayed.<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 21
contact<br />
kubit <strong>GmbH</strong><br />
Tiergartenstraße 79<br />
01219 Dresden<br />
Germany<br />
phone: +49 351 418880-0<br />
fax: +49 351 418880-0<br />
email: <strong>in</strong>fo@kubit-software.com<br />
web: www.kubit-software.com<br />
www.kubit-software.com<br />
kubit <strong>GmbH</strong> Software for survey<strong>in</strong>g and as-built documentation www.kubit-software.com 22