Rudarski radovi br 4 2011 - Institut za rudarstvo i metalurgiju Bor

transport system for waste and water intake<br />
with settling pond and pump station,<br />
it is necessary to construct a retention<br />
dam, height of about 34 m, upstream from<br />
the village Veliki Krivelj.<br />
REFERENCES<br />
[1] Additional Mining Design of Copper<br />
Ore Mining and Processing from the<br />
Veliki Krivelj Deposit for Capacity of<br />
10.6 x 10 6 t of Wet Ore Annually,<br />
Mining and Metallurgy Institute Bor,<br />
March 2011 (in Serbian)<br />
[2] Technical Design of Disposal the<br />
Flotation Tailings for Capacity of 10.6<br />
x 10 6 t of Wet Ore, Mining and<br />
Metallurgy Institute Bor, March 2011<br />
(in Serbian)<br />
[3] Expertise the Current State of the Veliki<br />
Krivelj Tailing Dump with Conceptual<br />
Design of Disposal the Flotation<br />
Tailings disposal in the Krivelj River<br />
Valley, Copper Institute Bor, March<br />
2003 (in Serbian)<br />
[4] D. Kržanović, M. Mikić, M. Ljubojev,<br />
Analysis the Spatial Position of the<br />
Mining Facilities of the Veliki Krivelj<br />
Mine in Relation to the Proposed<br />
Tunnel Route for Relocation the Krivelj<br />
River, Mining Engineering, No. 3,<br />
2011, pp. 1-12<br />
[5] M. Ljubojev, D. Ignjatović, L.<br />
Djurdjevac Ignjatović, V. Ljubojev,<br />
Preparations for Tunnel Investigation<br />
and Field Recording, Mining<br />
Engineering, No. 1, 2011, pp. 135-166<br />
No 4, 2011. 64<br />
MINING ENGINEERING