Institut za rudarstvo i metalurgiju Bor

CONTENT OF THE SIMPLIFIED
MINING PROJECT
Taking a technological sample have to
be provided by the project of investigation,
where their basic elements are also
given – spatial position of testing bench,
amounts that are mined as well as laboratory
and other analyses to be done. Simplified
Mining Project in accordance with
the Article 43 of the Regulation on contents
of mining projects (“Official Gazette
of RS No. 27/97) contains the following
parts:
1. Project task with the consent of
investors and appropriate bases for
design,
2. Technical solution with location
data,
3. Technical description on method of
test bench development,
4. Energy solution,
5. Bill of quantities and calculation,
6. Drawings and plans at the appropriate
scale,
7. Special protective measures.
Project task should provide the basic
guidelines and content of the project and
the investor confirms the agreement
signed by the responsible person and
stamp of the company. Technical solution
provides a description of sampling technology,
prescribed quantity for sampling
and the exact spatial position of test
bench. Technical description has to show
the technological process with all parameters
of technological process of taking
minerals, necessary to secure anticipated
amount set aside from the massif. In the
absence of basic parameters for design (in
the first place of engineering- geological
environmental conditions), it is required to
limit the test bench itself to the lower
heights (3 to 5m) in order to avoid possible
uncontrolled landslides and sliding mass.
Ministry of Mines and Energy issued
the consent on defining the quantity of
mineral raw material to the project that
could be exploited and have to be within
the prescribed limits by the act of Ministry.
Validity of this solution coincides
with the period of validity that is defined
by the basic solution of geological prospecting
works at this locality.
The results obtained by the analyses of
technological samples are shown in the
project report on reserves of mineral raw
materials.
CONCLUSION
Technological sampling and analyzing
of technological efficiency is an important
criterion, among others, for balancing the
reserves of mineral raw materials.
As we have seen, in recent years there
has been intensification of mining in terms
of technological tests in the locality. The
exposed movements show that recovery
came gradually in terms of higher demand
for construction material.
The movement of required approvals
also presents not only a good indicator of
interested investor in this type of investigation
and for certain investments in this
field of industry, but its very high sensitivity
to the economic trends.
For further analyses of this type, the
comparative analyses of the obtained geological
prospecting and analyses of SMP
could be sued in future work as well as
their comparison with a specific location,
i.e. municipality. Also a comparison with
the certified mineral raw materials in the
same localities and their usage could give
very interesting data.
No 1,2010. 11
MINING ENGINEERING