9 - AHP Merkle GmbH
9 - AHP Merkle GmbH 9 - AHP Merkle GmbH
Kurzer Hub Short stroke Petite course BZR 500-33 / 36 Bauform 33 Style 33 Forme 33 Bauform 36 Style 36 Forme 36 Bestellbezeichnung (Beispiel) Order specifi cation (example) Référence de commande (exemple) BZR 500 BZR 320 Kolben Ø Piston Ø Ø Piston Stangen Ø (d) Rod Ø (d) Ø Tige (d) 25 32 40 50 63 80 100 1/96 16 20 25 32 40 50 60 .50 / 32. 33. 201. 25 Bauform Style Forme 33 33 33 33 33 33 33 36 36 36 36 36 36 36 201 201 201 201 201 201 201 Technische Änderungen vorbehalten Subject to change without notice Sous réserve de modifi cations P3 L Funktionsart Operation mode Mode de fonctionnement 204 204 204 204 204 204 204 206 206 206 206 206 206 206 G G 25 25 25 30 32 40 50 50 50 63 80 L7 L7 15 15 8 8 7 L9 L2 7 L9 L2 100 100 100 100 130 100 130 ≤100 ≤100 ≤100 ≤100 ≤130 ≤130 L41 h h1* h2 A+Hub A+stroke A+course L41 m n h h1* h2 A+Hub A+stroke A+course 1 2 3 BZR 500 BZR 320 208 20 50 100 ≤100 >100–200 208 208 208 208 208 208 Standard Standard Standard Maße in mm Dimensions in mm Dimensions en mm Hub Stroke Course Nenndruck, statisch Nominal pressure, static Pression nominale, statique 500 bar (7200 PSI) 40+Hub 40+stroke 40+course 40+Hub 40+stroke 40+course Kundenwunsch Customer request Souhait du client >100–200 >100–200 >100–200 >100–200 >130–200 >130–200 m n Hub stroke course L51 Hub stroke course L51 Schalterposition Position of switch Position de contacteur P1 P3 P4 C V E N m G4 a 40 40 d2 h2 auf Kundenwunsch h2 specify when required h2 selon spécifi cations du client P4 a 50 54 65 72 85 90 d1 h2 auf Kundenwunsch h2 specify when required h2 selon spécifi cations du clients Berechnungsgrundlage siehe ahp informiert Calculation based on “Information from AHP“ Base de calcul, voir « AHP vous informe » L R 62 62 BZR 500 97 105 119 A 72 78 89 P3 75 81 95 b b Ød5 14 ØP 30 14 Ød5 ØP BZR 320 30 d2 201 204 206 208 201 204 206 208 44 95 63 76 70 108 89 89 P1 P1 P3 M x Tiefe M x depth M x profondeur *h1 ab Standardhub 3 oder auf Kundenwunsch * h1 starting at standard stroke 3 or as required by customer * h1 à partir de course standard 3 ou selon spécifi cation client Zur Arretierung (bei höheren Drücken) ist eine Abstützung erforderlich. A support is required for locking (under higher pressures). A pression élevée, un support arrière est nécessaire. Ausführung Mode Mode Option Options Options 140 102 110 112 157 142 127 156 114 127 131 174 160 145 163 121 132 133 180 164 149 A 78 112 100 90 89 125 113 101 97 133 121 109
Nenndruck, statisch Nominal pressure, static Pression nominale, statique 320 bar (4600 PSI) G G a 65 75 85 100 125 160 200 L7 L7 b 45 55 63 75 95 120 150 15 15 8 8 7 L9 L2 7 L9 L2 d1 8,5 10,5 10,5 13 17 21 25 ** Standard wie h ** Standard as in h ** Standard comme h d2 50 55 63 76 95 120 158 L41 L41 d5 4 4 4 5 6 6 8 40+Hub 40+stroke 40+course h h1* h2 A+Hub A+stroke A+course m n 40+Hub 40+stroke 40+course h h1* h2 A+Hub A+stroke A+course 201 33 38 40 44 50 60 64 h m 204 206 208 33 33 38 40 44 50 43 45 38 40 44 50 68 40 n h 33 38 40 44 50 60 64 201 26 27 27 30 41 47 54 h1 204 206 208 26 27 27 30 41 43 45 201 206 33 38 40 44 50 60 64 L51 L51 BZR 500 BZR 320 BZR 500 BZR 320 BZR 500 BZR 320 BZR 500 BZR 320 201 204 206 208 Hub stroke course a 40 h2 auf Kundenwunsch h2 specify when required h2 selon spécifi cations du client Hub stroke course 40 d2 a 201 208 204 206 d1 62 62 b b Ød5 14 ØP 30 14 Ød5 ØP h1 h2 L2 L41 L41 L51 L51 L7 L9 m*** n P 204 208 26 27 27 30 41 60 64 7 P4 h2 auf Kundenwunsch h2 specify when required h2 selon spécifi cations du clients *h1 ab Standardhub 3 oder auf Kundenwunsch * h1 starting at standard stroke 3 or as required by customer * h1 à partir de course standard 3 ou selon spécifi cation client 21 21 201 208 21 204 206 21 201 206 7,5 P1 P3 P1 P3 204 208 21 201 206 7,5 30 d2 M x Tiefe M x depth M x profondeur Zur Arretierung (bei höheren Drücken) ist eine Abstützung erforderlich. A support is required for locking (under higher pressures). A pression élevée, un support arrière est nécessaire. Nach Kundenwunsch (bitte Maß h2 bei Bestellung angeben)** For keyway position please specify h2 dimension** Veuillez précisé la dimension h2, lors de la commande** *** Passende Passfeder siehe Seite 16/3 *** Matching key available. See page 16/3 *** Voir page 16/3 pour les clavettes correspondantes 204 208 H11 21 15 10 25 26 25 26 10 26 10 26 20 10 27 28 27 28 10 28 10 28 25 10 29,5 32 29,5 32 13 32 13 32 30 14 32 35 32 35 16 35 16 35 40 14 39 43 39 43 21 43 21 43 46 15 40 45 40 45 25 45 25 45 61 **** Wird mitgeliefert **** Is included **** Est inclus Langer Hub Long stroke Course longue BZR 320-33 / 36 29 35 41 47 60 66 85 10 12 12 15 20 24 28 2 10,6 13 M10 M8x16 8x1,5 15 SW G 3 13 17 M12 M10x20 9x2 3 13 21 M16 M10x20 9x2 5 13 26 M20 M12x24 9x2 5 13 32 M27 M16x32 9x2 7 13 41 M30 M20x35 9x2 7 – Bauform 33 Style 33 Forme 33 Bauform 36 Style 36 Forme 36 M x Tiefe M x depth M x profondeur O-Ring**** O-seal**** Joint torique**** M42 M24x50 11x2 1/97
- Page 193 and 194: Nenndruck, statisch Nominal pressur
- Page 195 and 196: Nenndruck, statisch Nominal pressur
- Page 197 and 198: Nenndruck, statisch Nominal pressur
- Page 199 and 200: Nenndruck, statisch Nominal pressur
- Page 201 and 202: Nenndruck, statisch Nominal pressur
- Page 203 and 204: Nenndruck, statisch Nominal pressur
- Page 205 and 206: BZN 500.06 BZN 500.36 201 206 40 44
- Page 207 and 208: BZN 500.50/32.N20 Hub Stroke Course
- Page 209 and 210: Optionen Options Options V E3 G4 Si
- Page 211 and 212: Nenndruck, statisch Nominal pressur
- Page 213 and 214: Mit Magnetfeld-Sensoren With magnet
- Page 215 and 216: Wegmesssysteme für Blockzylinder (
- Page 217 and 218: Nenndruck, statisch Nominal pressur
- Page 219 and 220: Nenndruck, statisch Nominal pressur
- Page 221 and 222: Nenndruck, statisch Nominal pressur
- Page 223 and 224: Nenndruck, statisch Nominal pressur
- Page 225 and 226: Nenndruck, statisch Nominal pressur
- Page 227 and 228: Nenndruck, statisch Nominal pressur
- Page 229 and 230: MBZ 160.32/20 Hub Stroke Course 10
- Page 231 and 232: MBZ 160 MBZ 160.50/32 MBZ 160.63/40
- Page 233 and 234: Schalterposition Position of switch
- Page 235 and 236: Nenndruck, statisch Nominal pressur
- Page 237 and 238: Nenndruck, statisch Nominal pressur
- Page 239 and 240: Nenndruck, statisch Nominal pressur
- Page 241 and 242: Nenndruck, statisch Nominal pressur
- Page 243: Nenndruck, statisch Nominal pressur
- Page 247 and 248: Optionen Options Options V E... H20
- Page 249 and 250: Nenndruck, statisch Nominal pressur
- Page 251 and 252: Nenndruck, statisch Nominal pressur
- Page 253 and 254: Optionen Options Options BRB / BRBN
- Page 255 and 256: Nenndruck, statisch Nominal pressur
- Page 257 and 258: Nenndruck, statisch Nominal pressur
- Page 259 and 260: Nenndruck, statisch Nominal pressur
- Page 261 and 262: Nenndruck, statisch Nominal pressur
- Page 263 and 264: Optionen Options Options V E... N m
- Page 265 and 266: Nenndruck, statisch Nominal pressur
- Page 267 and 268: Nenndruck, statisch Nominal pressur
- Page 269 and 270: Nenndruck, statisch Nominal pressur
- Page 271 and 272: Nenndruck, statisch Nominal pressur
- Page 273 and 274: Nenndruck, statisch Nominal pressur
- Page 275 and 276: Nenndruck, statisch Nominal pressur
- Page 277 and 278: Dichtsatz komplett Seal kit complet
- Page 279 and 280: Dichtsatz komplett Seal kit complet
- Page 281 and 282: Verschraubung komplett mit Dichtung
- Page 283 and 284: Ersatzschalter Replacement sensor D
- Page 285 and 286: Ersatzschalter Replacement sensor D
- Page 287 and 288: 1/139
- Page 289 and 290: Stanzzylinder Stamping cylinder Vé
- Page 291 and 292: Bauform Style Forme 01 02 03 04 05
- Page 293 and 294: N m Z Mit Nut With keyway Avec rain
Nenndruck, statisch Nominal pressure, static Pression nominale, statique<br />
320 bar (4600 PSI)<br />
G<br />
G<br />
a<br />
65<br />
75<br />
85<br />
100<br />
125<br />
160<br />
200<br />
L7<br />
L7<br />
b<br />
45<br />
55<br />
63<br />
75<br />
95<br />
120<br />
150<br />
15<br />
15<br />
8<br />
8<br />
7<br />
L9 L2<br />
7<br />
L9 L2<br />
d1<br />
8,5<br />
10,5<br />
10,5<br />
13<br />
17<br />
21<br />
25<br />
** Standard wie h<br />
** Standard as in h<br />
** Standard comme h<br />
d2<br />
50<br />
55<br />
63<br />
76<br />
95<br />
120<br />
158<br />
L41<br />
L41<br />
d5<br />
4<br />
4<br />
4<br />
5<br />
6<br />
6<br />
8<br />
40+Hub<br />
40+stroke 40+course<br />
h h1*<br />
h2<br />
A+Hub A+stroke A+course<br />
m<br />
n<br />
40+Hub<br />
40+stroke 40+course<br />
h<br />
h1*<br />
h2<br />
A+Hub A+stroke A+course<br />
201<br />
33<br />
38<br />
40<br />
44<br />
50<br />
60<br />
64<br />
h<br />
m<br />
204<br />
206 208<br />
33 33<br />
38<br />
40<br />
44<br />
50<br />
43<br />
45<br />
38<br />
40<br />
44<br />
50<br />
68<br />
40<br />
n<br />
h<br />
33<br />
38<br />
40<br />
44<br />
50<br />
60<br />
64<br />
201<br />
26<br />
27<br />
27<br />
30<br />
41<br />
47<br />
54<br />
h1<br />
204<br />
206<br />
208<br />
26<br />
27<br />
27<br />
30<br />
41<br />
43<br />
45<br />
201<br />
206<br />
33<br />
38<br />
40<br />
44<br />
50<br />
60<br />
64<br />
L51<br />
L51<br />
BZR 500 BZR 320 BZR 500 BZR 320 BZR 500 BZR 320 BZR 500 BZR 320<br />
201<br />
204<br />
206<br />
208<br />
Hub<br />
stroke course<br />
a 40<br />
h2 auf Kundenwunsch<br />
h2 specify when required<br />
h2 selon spécifi cations du client<br />
Hub<br />
stroke course<br />
40<br />
d2<br />
a<br />
201<br />
208<br />
204<br />
206<br />
d1<br />
62<br />
62<br />
b<br />
b<br />
Ød5<br />
14<br />
ØP 30<br />
14<br />
Ød5<br />
ØP<br />
h1 h2 L2 L41 L41 L51 L51 L7 L9 m*** n P<br />
204<br />
208<br />
26<br />
27<br />
27<br />
30<br />
41<br />
60<br />
64<br />
7<br />
P4<br />
h2 auf Kundenwunsch<br />
h2 specify when required<br />
h2 selon spécifi cations du clients<br />
*h1 ab Standardhub 3 oder auf Kundenwunsch<br />
* h1 starting at standard stroke 3 or as required by customer<br />
* h1 à partir de course standard 3 ou selon spécifi cation client<br />
21<br />
21<br />
201<br />
208<br />
21<br />
204<br />
206<br />
21<br />
201<br />
206<br />
7,5<br />
P1<br />
P3<br />
P1<br />
P3<br />
204<br />
208<br />
21<br />
201<br />
206<br />
7,5<br />
30<br />
d2<br />
M x Tiefe<br />
M x depth<br />
M x profondeur<br />
Zur Arretierung (bei höheren Drücken) ist eine Abstützung erforderlich.<br />
A support is required for locking (under higher pressures).<br />
A pression élevée, un support arrière est nécessaire.<br />
Nach Kundenwunsch (bitte Maß h2 bei Bestellung<br />
angeben)**<br />
For keyway position please specify h2 dimension**<br />
Veuillez précisé la dimension h2, lors de la commande**<br />
*** Passende Passfeder siehe Seite 16/3<br />
*** Matching key available. See page 16/3<br />
*** Voir page 16/3 pour les clavettes correspondantes<br />
204<br />
208 H11<br />
21<br />
15<br />
10 25 26 25 26 10 26 10 26 20<br />
10 27 28 27 28 10 28 10 28 25<br />
10 29,5 32 29,5 32 13 32 13 32 30<br />
14 32 35 32 35 16 35 16 35 40<br />
14 39 43 39 43 21 43 21 43 46<br />
15 40 45 40 45 25 45 25 45 61<br />
**** Wird mitgeliefert<br />
**** Is included<br />
**** Est inclus<br />
Langer Hub Long stroke Course longue<br />
BZR 320-33 / 36<br />
29<br />
35<br />
41<br />
47<br />
60<br />
66<br />
85<br />
10<br />
12<br />
12<br />
15<br />
20<br />
24<br />
28<br />
2 10,6 13 M10 M8x16 8x1,5<br />
15<br />
SW G<br />
3 13 17 M12 M10x20 9x2<br />
3 13 21 M16 M10x20 9x2<br />
5 13 26 M20 M12x24 9x2<br />
5 13 32 M27 M16x32 9x2<br />
7 13 41 M30 M20x35 9x2<br />
7<br />
–<br />
Bauform 33<br />
Style 33<br />
Forme 33<br />
Bauform 36<br />
Style 36<br />
Forme 36<br />
M x Tiefe<br />
M x depth<br />
M x profondeur<br />
O-Ring****<br />
O-seal****<br />
Joint torique****<br />
M42 M24x50 11x2<br />
1/97