LabAutomation 2006 - SLAS
LabAutomation 2006 - SLAS LabAutomation 2006 - SLAS
TP29 Hanh Le PerkinElmer Life and Analytical Sciences Boston, Massachusetts hanh.le@perkinelmer.com LabAutomation2006 Co-Author(s) Harry Harney Stephen Hurt Robert Stanaker PerkinElmer Life and Analytical Sciences Rajesh Manchanda Utilization of the ATPlite 1step Detection System for Homogenous Automated Cytotoxicity Assays A number of stategies are currently being implemented in the effort to increase the success rate in identifying new potential therapeutic lead compounds, and reducing the number of late stage failures in clinical trials. One approach is to perform ADME/Tox profiling at an earlier stage in the drug discovery process, leading therefore to the need for increased efficiency in carrying out these asssays. ATPlite 1step is a homogenous, luciferase-based luminescence assay system for the quantitative measurement of proliferation and cytotoxicity in cultured mammalian cells. The assay is based on the measurement of ATP as a marker for cell viability, and is both highly sensitive and easy-to-use. The single addition format for the assay makes it particulary suitable for automation. We have used the ATPlite 1step system to perform automated cytoxicity assays on the Cellular Workstation, an integrated walk-way system for cellular assays. The components of the workstation as configured for this assay include an Evolution P3 for reagent dispensing, EnVision microplate reader,CataLyst Express robotic arm, Cytomat microplate incubator and POLARATM scheduling sorftware. Data will be presented demonstrating the assay protocol and the automation methodology. TP30 Anthony Lemmo Entevis Inc Sudbury, Massachusetts tlemmo@entevis.com Automated Dispensing of Solid Powders and Viscous Reagents: Enabling Solutions for Material Discovery, Development and Optimization Two major challenges in the automation of aspects of new materials development are the dispensing of solid powders and dispensing high viscosity reagents. We have developed automated, benchtop systems to address both of these key challenges. The solid dispensing system is capable of dispensing powders with bulk densities ranging from 0.03 to 3 in the mass range from 100 micrograms to hundreds of milligrams with %CV’s of 15% or better. The viscous fluid dispensing system can handle reagents with viscosities that range from 0.01 to 900 cp and cover the volume range from 1 microliter to hundreds of milliliters with %CV’s typically < 2%. These systems, either used as stand-alone solutions, or in a combined workstation, have utility in the pharmaceutical development process for the automation of aqueous solubility, salt selection, polymorph screening and animal dosing experiments. They can also have a major impact in compound management operation, where the majority of samples are either solid powders or “difficult” liquids (e.g. oils, waxes, etc.). 166
TP31 Sophia Liang Aurora Biomed Vancouver, Canada sophia@aurorabiomed.com Where Laboratory Technologies Emerge and Merge Co-Author(s) David Wicks Joy Goswami Dong Liang, Aurora Biomed Inc. Optimization of A Robotic System For Automation Of Peptide Array Printing Printing high-density arrays have become an important tool in drug screening, molecular biology, and genetic analysis. Printing multiple samples onto a solid substrate allows researchers to efficiently screen thousands of conditions in a very small space, thereby saving time and money. In order to screen for peptides that inhibit bacterial growth, Aurora Biomed Inc. performed array printing onto a solid substrate using variations of a peptide sequence with its versatile VERSA1000 liquid handling workstation. In order to optimize the nano-array technology and print volumes, careful standardization procedures were carried out on automation parameters such as pulse length, pressure, solvent concentration, solvent composition, substrate surface treatment, robotic movement and speed. Results from our experiments conclusively showed that the optimization was successful in generating high-density arrays for antibodies and peptides at volumes as low as 15nL on the epoxy coated glass slides. We present here, the optimization procedure of our present printing technology and explore the applications of the VERSA1000 in array printing. TP32 David Lorenz Deerac Fluidics Dublin 2, Ireland david.lorenz@deerac.com Co-Author(s) Aoife Gallagher, Deerac Fluidics Brad Larson Tracy Worzella Michael Bjerke Promega Corporation Eric Matthews, BMG Labtech High-Throughput Automation of a Dual Reporter Assay in Low-Volume 384 & 1536- Well Plate Formats Using the Deerac Fluidics’ EquatorTM HTS- Eight Tip Pipetting System, Promega’s Chroma-Luc Technology, and BMG LABTECH’s PHERAstar Microplate Reader The drive towards miniaturization within the pharmaceutical and biotechnology fields has created a need for liquid handling technologies that accurately deliver low volume reagents to high-density plates. This has also created a need for simple, fully scaleable assays in low volumes. Here we demonstrate the successful combination of both through the use of the Equator HTS - Eight Tip Pipetting System, and the dual color Chroma-Luc technology. Cellular lysates, containing the green CBG99luc and red CBRluc genes, followed by Chroma-Glo reagent, were dispensed in low-volume 384, and 1536-well formats using volumes ranging from 10ul to 500nl. Luminescence from the two luciferases was then simultaneously measured using the BMG LABTECH PHERAstar plate reader. The exceptional Z’ Factor scores, linearity, limit of detection, and separation of signal data, show the flexibility and reliability of the Equator HTS, and Chroma-Luc dual reporter technology in any high-throughput situation. 167
- Page 118 and 119: MP27 J. Colin Cox Duke University M
- Page 120 and 121: MP31 Frank Doffing IMM - Institut f
- Page 122 and 123: MP35 Aoife Gallagher Deerac Fluidic
- Page 124 and 125: MP39 Yunseok Heo University of Mich
- Page 126 and 127: MP43 David Humphries Lawrence Berke
- Page 128 and 129: MP47 Joohoon Kim University of Texa
- Page 130 and 131: MP51 Michelle Li Saint Louis Univer
- Page 132 and 133: MP55 Philip Manning Procter & Gambl
- Page 134 and 135: MP59 Irena Nikcevic University of C
- Page 136 and 137: MP63 Qiaosheng Pu Virginia Commonwe
- Page 138 and 139: MP67 Alexander Roth National Instit
- Page 140 and 141: MP71 Sang Jun Son University of Mar
- Page 142 and 143: MP75 Lois Tack PerkinElmer Life & A
- Page 144 and 145: MP79 Angelo Trivelli J Craig Venter
- Page 146 and 147: MP83 Tracy Worzella Promega Corpora
- Page 148 and 149: MP87 Peter Greenhalgh Astech Projec
- Page 150 and 151: MP91 David Ferrick Seahorse Bioscie
- Page 152 and 153: MP95 Christine Brideau Merck Frosst
- Page 154 and 155: TP01 Marc Pfeifer Roche Molecular S
- Page 156 and 157: TP05 Marcy Engelstein Millipore Cor
- Page 158 and 159: TP09 Aoife Gallagher Deerac Fluidic
- Page 160 and 161: TP13 Ulrike Honisch Greiner Bio-One
- Page 162 and 163: TP17 Michael Gary Jackson Beckman-C
- Page 164 and 165: TP21 Libby Kellard Millipore Danver
- Page 166 and 167: TP25 Joseph Kofman Pfizer San Diego
- Page 170 and 171: TP33 Stephen Lowry Thermo Electron
- Page 172 and 173: TP37 Donald J. Nagy California Comp
- Page 174 and 175: TP41 Clifford Olson Zinsser Analyti
- Page 176 and 177: TP45 Nick Price Invitrogen Corporat
- Page 178 and 179: TP49 Michael Raimo Arqule Inc. Wobu
- Page 180 and 181: TP53 Jim Schools Biosero, Inc Monro
- Page 182 and 183: TP57 Darcy Shave Waters Corporation
- Page 184 and 185: TP61 Robert Stanaker Perkin Elmer D
- Page 186 and 187: TP65 Henrik Svennberg Astrazeneca R
- Page 188 and 189: TP69 Paige Vinson Thermo Electron C
- Page 190 and 191: TP73 Thomas Weierstall Qiagen Gmbh
- Page 192 and 193: TP77 Susan Yan Pierce Biotechnology
- Page 194 and 195: TP81 Wayne Bowen TTP LabTech Melbou
- Page 196 and 197: TP85 Evan F. Cromwell Blueshift Bio
- Page 198 and 199: TP89 Wanli Xing Tsinghua University
- Page 200 and 201: TP93 Holger Gumm Sepiatec GmbH Berl
- Page 202 and 203: Notes LabAutomation2006 200
- Page 204 and 205: LabAutomation2006 Monday, January 2
- Page 206 and 207: LabAutomation2006 Monday, January 2
- Page 208 and 209: LabAutomation2006 Tuesday, January
- Page 210 and 211: LabAutomation2006 Tuesday, January
- Page 212 and 213: Notes LabAutomation2006 210
- Page 214 and 215: LabAutomation2006 New Product Launc
- Page 216 and 217: LabAutomation2006 New Product Launc
TP31<br />
Sophia Liang<br />
Aurora Biomed<br />
Vancouver, Canada<br />
sophia@aurorabiomed.com<br />
Where Laboratory Technologies Emerge and Merge<br />
Co-Author(s)<br />
David Wicks<br />
Joy Goswami<br />
Dong Liang,<br />
Aurora Biomed Inc.<br />
Optimization of A Robotic System For Automation Of Peptide Array Printing<br />
Printing high-density arrays have become an important tool in drug screening, molecular biology, and genetic analysis. Printing multiple<br />
samples onto a solid substrate allows researchers to efficiently screen thousands of conditions in a very small space, thereby saving<br />
time and money. In order to screen for peptides that inhibit bacterial growth, Aurora Biomed Inc. performed array printing onto a solid<br />
substrate using variations of a peptide sequence with its versatile VERSA1000 liquid handling workstation. In order to optimize the<br />
nano-array technology and print volumes, careful standardization procedures were carried out on automation parameters such as pulse<br />
length, pressure, solvent concentration, solvent composition, substrate surface treatment, robotic movement and speed. Results from our<br />
experiments conclusively showed that the optimization was successful in generating high-density arrays for antibodies and peptides at<br />
volumes as low as 15nL on the epoxy coated glass slides. We present here, the optimization procedure of our present printing technology<br />
and explore the applications of the VERSA1000 in array printing.<br />
TP32<br />
David Lorenz<br />
Deerac Fluidics<br />
Dublin 2, Ireland<br />
david.lorenz@deerac.com<br />
Co-Author(s)<br />
Aoife Gallagher, Deerac Fluidics<br />
Brad Larson<br />
Tracy Worzella<br />
Michael Bjerke<br />
Promega Corporation<br />
Eric Matthews, BMG Labtech<br />
High-Throughput Automation of a Dual Reporter Assay in Low-Volume 384 & 1536-<br />
Well Plate Formats Using the Deerac Fluidics’ EquatorTM HTS- Eight Tip Pipetting<br />
System, Promega’s Chroma-Luc Technology, and BMG LABTECH’s PHERAstar<br />
Microplate Reader<br />
The drive towards miniaturization within the pharmaceutical and biotechnology fields has created a need for liquid handling technologies<br />
that accurately deliver low volume reagents to high-density plates. This has also created a need for simple, fully scaleable assays in<br />
low volumes. Here we demonstrate the successful combination of both through the use of the Equator HTS - Eight Tip Pipetting<br />
System, and the dual color Chroma-Luc technology. Cellular lysates, containing the green CBG99luc and red CBRluc genes, followed<br />
by Chroma-Glo reagent, were dispensed in low-volume 384, and 1536-well formats using volumes ranging from 10ul to 500nl.<br />
Luminescence from the two luciferases was then simultaneously measured using the BMG LABTECH PHERAstar plate reader. The<br />
exceptional Z’ Factor scores, linearity, limit of detection, and separation of signal data, show the flexibility and reliability of the Equator<br />
HTS, and Chroma-Luc dual reporter technology in any high-throughput situation.<br />
167