LabAutomation 2006 - SLAS
LabAutomation 2006 - SLAS
LabAutomation 2006 - SLAS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MP49<br />
Thomas Krüger-Sundhaus<br />
University Rostock<br />
Rostock, Germany<br />
thomas.krueger-sundhaus@uni-rostock.de<br />
Where Laboratory Technologies Emerge and Merge<br />
Co-Author(s)<br />
Norbert Stoll, Celisca<br />
Christian Wendler, Celisca<br />
Concept and Design for the Integration of a Complex Laboratory Robot System Into LIMS<br />
At both coordination and execution of individual tasks, at data achieving and surveillance of an automated laboratory system, laboratory<br />
information management systems (LIMS) become ever more important. This includes besides the life visualization of running processes at<br />
the systems also the ability of control software-access. A working laboratory system for chemical applications, installed at the Center for<br />
Life Science Automation (celisca), is managed by a process control system that has been developed in “LabVIEW”. It allows the experiment<br />
planning as well as the visualization and data logging during the run. After firstly being available on the analytical systems’ control PCs, the<br />
row data is read in by the LIMS and stored in a data base. In order to display the data on the user’s web browser the LIMS-server converts<br />
them e.g. into HTML format. For coding data and texts for the exchange via internet as well as for visualization in browsers, XML has<br />
established itself as new standard format. Due to the explicit structuring XML documents can easily be transformed into other formats.<br />
“LabVIEW” supports the bi-directional convergence of XML documents. This allows access to the LIMS from any location in order to<br />
configure the lab robots single-systems or to generate contiguous program sequences.<br />
MP50<br />
Anil Kumar<br />
Institute of Genomics and Integrative Biology<br />
India, Delhi<br />
anilcbt@yahoo.com<br />
Co-Author(s)<br />
Rita Kumar<br />
Purnima Dhall<br />
Institute of Genomics and Integrative Biology<br />
Five days to five minutes: BOD analysis of industrial effluent using biosensor<br />
The conventional BOD test requires 5-7 days, and consequently it is not a suitable method for on-line process monitoring of waste waters.<br />
Thus, it is necessary to develop a method that could circumvent the weaknesses of the conventional method. Present study reports the<br />
determination of BOD within minutes using the developed sensor.<br />
To develop the biosensor for rapid and reproducible BOD estimation of wastewater, different biological and electronic components were<br />
arranged. Initially, change in oxygen concentration was measured and calibrated in terms of electric current covering a range of GGA<br />
concentrations (15 – 60 mg/ml) by putting an electrode immobilized with bacteria. The developed and characterized BOD sensor was used to<br />
analyze the BOD values of different concentrations of the standard GGA solution, the BOD5 of which was simultaneously carried out. A linear<br />
relationship was observed between the current difference and the 5-day BOD of the standard solution up to a concentration of 90 mg l-1.<br />
The lower limit of detection was 1 mg l-1 BOD, by the developed sensor. A good correlation (r = 0.938) was observed between the BOD<br />
values estimated by the conventional method and that by the developed sensor. BOD of a wide range of industrial wastewaters having<br />
low-moderate-high biodegradable wastewater samples could be assessed within a short time period. Developed biosensor is a potable<br />
device and can be used for online monitoring of BOD of wastewaters at industrial site.<br />
127