MEMORANDUM FOR A1 - Air Force E-Publishing
MEMORANDUM FOR A1 - Air Force E-Publishing
MEMORANDUM FOR A1 - Air Force E-Publishing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Clear Zones, as well as apron areas and taxiways, regardless of their location. As a minimum,<br />
turf shall be maintained 500 feet outside the AMA boundary where able. Installations located in<br />
arid climates where growing grass is difficult may develop natural vegetation on the airfield to<br />
limit attractiveness to wildlife. These situations require comprehensive vegetation/wildlife<br />
hazard management and will be reviewed individually by HQ AFSEC/SEFW for approval.<br />
Installation safety offices may request a grass height restriction waiver from HQ AFSEC/SEFW<br />
after MAJCOM coordination.<br />
(Add) 7.3.1.5.10. Technical Assistance. Technical assistance is available through the USAF<br />
BASH Team, HQ AFSEC/SEFW, 9700 G Avenue, Suite 266, Kirtland AFB, NM 87117-5670.<br />
DSN: 246-5674/5848/5673 or Commercial: (505) 846-xxxx, and electronically by accessing the<br />
Safety Center web page. Obtain additional information on wildlife strike hazard reduction from<br />
AFPAM 91-212, Bird/Wildlife <strong>Air</strong>craft Strike Hazard (BASH) Management Techniques, and on<br />
wildlife strike reporting from AFI 91-204, Safety Investigations and Reports, and AFMAN 91-<br />
223, Aviation Safety Investigations and Reports.<br />
(Replace) 8.5.4. Assist supervisors in developing JSTO.<br />
(Replace) 8.7.4.1.5. Functional managers must train affected employees and employee<br />
representatives on approved variances, exemptions or any special procedures required and<br />
document training. Post copies in affected work areas until integrated into the JSTO.<br />
(Add) A3.8.3. Forward HATR summary information to AFSEC/SEFO when requested and/or if<br />
HAF level assistance is needed to mitigate hazards.<br />
(Delete) A.2.3.1.<br />
(Delete) A.2.3.2.<br />
(Delete) A.2.3.3.<br />
(Delete) A.2.3.4.<br />
(Delete) A.2.3.1..<br />
(Add) A2.3.1. The nomenclature, manufacturer and status of each equipment item for each<br />
Model Design Series.<br />
(Add) A2.3.2. If an update or procurement is in progress document the current configuration,<br />
the new configuration, its Initial Operational Capability (IOC) date and its expected completion<br />
date by Fiscal Year Quarter.<br />
(Add) A2.3.3. If an item is planned but not funded, do not report it. If an item is in source<br />
selection, report it as to be determined (TBD) and include estimated IOC and completion dates.
Change language