Data sheet - Fritz Kübler GmbH Zähl- und Sensortechnik
Data sheet - Fritz Kübler GmbH Zähl- und Sensortechnik Data sheet - Fritz Kübler GmbH Zähl- und Sensortechnik
Preset Counters LCD Preset Counters 1, 2, 4 or 6 Presets Codix 923 / 924 Pulse counter Functions / Count modes: Application examples CountDir + Add Roller shutter door with automatic shut-off STOP STOP UpDown + Add Automatic subtraction of faulty or reject parts from the total piece count UpUp + Add Adding up of two parallel or staggered production lines © Fritz Kübler GmbH, subject to errors and changes. 01/2012 • Count with direction mode • Difference mode • Quadrature mode quad/quad2/quad4 • Add, Sub, automatic reset • 2-input adding mode A+B • Ratio measurement A/B • Percentage difference measurement (A-B)/A x 100% • Batch counting • Totaliser (Overall total) • Multiplication and division factor (up to 99,9999) • Set value • Step or tracking preset Quad + Add Running direction and position on milling machines, Limit switch monitoring CountDir + Batch Logging of piece numbers and packing units plus control of replenishment of packing cartons Quad + Add tot Cut-to-length with overall total count and control of the machine www.kuebler.com 9
Preset Counters 10 LCD Preset Counters 1, 2, 4 or 6 Presets Codix 923 / 924 Frequency meter (Tachometer) Functions / Count modes: • A • Averaging Application examples A – B Synchro monitoring and control of two conveyor belts A/B Ratio measurement Time and Hours-run meter (Timer) Application examples InpB. InpB Interval measurement A B • A – B • A + B • A / B • (A – B) / A x 100 % (percentage display) • Quad (phase discriminator with recognition of direction) Quad Speed regulation with indication of direction (A-B)/A [%] Ratio measurement, e.g. for speed alignment FrErun Measurement of overall time from switching on the conveyor belt till switching off • Start delay • 2nd tacho input • Gate input • Multiplication and division factor (up to 99,9999) Functions / Count modes: • FrErun (Control via gate input) • Totaliser (Overall total) InpA. InpB Run-time measurement • Auto (Start via Reset, Stop at Preset) • InpB.InpB (Start with first edge at InpB., Stop with second edge InpB.) • InpA. InpB (Start with InpA., Stop with InpB.) Auto Time-controlled production line • Batch counting • Set value • Step or tracking preset www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 01/2012 STOP
- Page 1 and 2: Preset Counters 6 LCD Preset Counte
- Page 3: max. 10,5 Max. count frequency 50 k
Preset Counters<br />
LCD Preset Counters 1, 2, 4 or 6 Presets<br />
Codix 923 / 924<br />
Pulse counter<br />
Functions / Count modes:<br />
Application examples<br />
CountDir + Add<br />
Roller shutter door with automatic shut-off<br />
STOP<br />
STOP<br />
UpDown + Add<br />
Automatic subtraction of faulty or reject parts from the<br />
total piece count<br />
UpUp + Add<br />
Adding up of two parallel or staggered production lines<br />
© <strong>Fritz</strong> <strong>Kübler</strong> <strong>GmbH</strong>, subject to errors and changes. 01/2012<br />
• Count with direction mode<br />
• Difference mode<br />
• Quadrature mode quad/quad2/quad4<br />
• Add, Sub, automatic reset<br />
• 2-input adding mode A+B<br />
• Ratio measurement A/B<br />
• Percentage difference measurement (A-B)/A x 100%<br />
• Batch counting<br />
• Totaliser (Overall total)<br />
• Multiplication and division factor (up to 99,9999)<br />
• Set value<br />
• Step or tracking preset<br />
Quad + Add<br />
Running direction and position on milling machines,<br />
Limit switch monitoring<br />
CountDir + Batch<br />
Logging of piece numbers and packing units plus control of<br />
replenishment of packing cartons<br />
Quad + Add tot<br />
Cut-to-length with overall total count and control of the machine<br />
www.kuebler.com<br />
9