STRAUB-METAL-GRIP GT - Easier Pipe Joining With Straub

STRAUB-METAL-GRIP GT
More than the Original
With the new outlet coupling METAL-GRIP GT STRAUB presents a further
innovation in coupling technology: a pull-out resistant pipe connection,
compansion joint and side outlet in one.
The proven STRAUB-METAL-GRIP joins metal piping without pipe end preparation.
It is space-saving, has a low weight and good damping properties.
Therefore the STRAUB-METAL-GRIP is the proved pipe connection for
construction and underground, for water or waste
water installations and industrial process
piping.
The new STRAUB-METAL-GRIP GT
combines all advantages of
the well-known Original
with the added feature
of an integral side outlet.
This means: even more
advantages and various
additional fields of application.
NEW

The connecting one
the clever principle
STRAUB-METAL-GRIP GT outlet couplings are designed to serve as a joining device
providing and integral outlet like:
- taking of samples, drainage,
ventilation
The advantages:
- as a measuring point for
pressure, temperature, flow
through or other controls
- as a prepared possibility for
additional outlets for new users
or consumers, for installation
expansions ect.
- Cost-saving: one STRAUB-METAL-GRIP GT replaces a tee with two additional couplings.
- Time-saving: additional outlets can be realized fastly, with very short interruption times.
- Simply: usable without particular sanitary tools and no pipe end preparation.
- As all STRAUB couplings, the METAL-GRIP GT is detachable and re-usable.
Available in sizes (AD): 60.3 / 76.1 / 88.9 / 114.3 / 139.7 mm.
pressure rate up to PN 16 (232 psi), temperature range from –20° to +70°C.
Connecting possibilities:
With threaded fittings (1), STRAUB-Couplings (2)
or other pipe joining methods like pressfittings etc.
(1)
(2)
MV Fluids Handling, Marven House, 1 Field Road, Reading, RG1 6AP - T: 0118 9503707 - F: 0118 9504066 - E: info@straub.co.uk - www.straub.co.uk
GT
STRAUB-METAL-GRIP GT
www.quint.ag
D 218 003 A 03/01 MV– © by STRAUB