Download - Little, Big Racing

R&S Business Unit Automotive
11.9 – Graph / Max / Min
Press the following button on the lower tool bar.
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
DATAVIEW Pg. 93/133
The following window will show Max / Min information relating only to the visible area, any data outside of the current
zoom is not considered.
Name ......................... Channel name
Min ............................. Minimum value within the viewed area**
Min X.......................... value in Time or Distance where the Min value occurred
Max ............................ Maximum value within the viewed area**
Max X......................... value in Time or Distance where the Max value occurred
Avg............................. Average channel value
Avg (Abs) ................... Average channel value (based on Absolute channel values)
S Dev ......................... Standard deviation channel value
Res............................. Decimal places resolution of channel
** If a channel is filtered in any way, the filtered min / max values will be shown.
Area of data being considered, if Distance is being
used as the X axis, this will show meters instead of
Time
Channel data
Tip – The Max / Min window can be activated by pressing and holding your right mouse button and dragging it to
form a zone between 2 grey vertical lines, when you release
the mouse button you will be asked to choose from Zoom or
Max / Min as shown here. Choose Max / Min, your data will
relate only to the area between the 2 grey boundary lines.
data view_std_manual v1.4.doc Digitek Spa Digitek Spa