Download - Little, Big Racing
Download - Little, Big Racing
Download - Little, Big Racing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R&S Business Unit Automotive<br />
10. Alarms<br />
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy<br />
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550<br />
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533<br />
Email : guest@digitek.it - Internet : http://w w w .digitek.it<br />
DATAVIEW Pg. 81/133<br />
Any channel you configure within Alarms is continuously monitored within the data set you are viewing.<br />
To activate the alarms system, select Setup / General / Search from the upper menu to display the following window.<br />
Use the pull down box to choose from one of the following<br />
OFF – No Alarm search<br />
Show Alarms – Automatically show any Alarm that exceeds<br />
your limits.<br />
Show All – Permanently show all Alarms regardless of state.<br />
To create an Alarm, select Configure / Alarms from the upper menu to display this wiondow.<br />
Press Add to create an Alarm as shown here.<br />
Double click the entry to open the configuration window.<br />
The OK range is considered as the normal working range of the channel<br />
The valid range is the maximum working range of the sensor, outside of this is<br />
considered a sensor fault and an Alarm is not indicated<br />
For information about Conditional channels, see section 24.2<br />
data view_std_manual v1.4.doc Digitek Spa Digitek Spa
Change language