Download - Little, Big Racing

R&S Business Unit Automotive
6.2 – General setup / Colours
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
DATAVIEW Pg. 49/133
The colours tab gives you control over the display area as well as the data contained within the analysis windows.
Windows background – Outside border of analysis window
Boxes background – inside area of analysis window
Add – create customised colour schemes
Comparison – Whenever a comparison of more than one data set is
selected, the data will be represented using the colours defined in this
comparison table.
In this example the first data set selected will be shown as yellow, the
second selection as red, etc.
Your colours should be chosen to give the clearest representation against your selected Boxes background. You do
not need to worry about light colours not printing as colour swap is available in the print menu, section 25.
Experience has shown that all backgrounds black, with very light colours for your comparison work the best, with
yellow best of all.
data view_std_manual v1.4.doc Digitek Spa Digitek Spa