Download - Little, Big Racing

R&S Business Unit Automotive
5.1 – Data logger manager / Clear Data
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
DATAVIEW Pg. 43/133
The Clear data command deletes all stored data from the logger memory, as well as returning the Run counter to 1.
For more information about memory management refer to sections 4.1 and 4.2
Note: This process requires an active Ethernet connection & your logger must be visible within the DK-Link program.
From the upper menu select Capture / Data logger / Clear data. You will be given
the following confirmation box. Press OK to clear data and check the bottom left of
your screen to ensure that you have received confirmation of process completion
Note: You logger will now wait for the cable disconnection or the 120sec timeout before resuming any logging
activity.
data view_std_manual v1.4.doc Digitek Spa Digitek Spa