Download - Little, Big Racing

R&S Business Unit Automotive
5. Connection tools
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
DATAVIEW Pg. 42/133
Connecting to a data logger does not necessarily mean that you have to perform a ‘download’. The method of
connection is however almost identical.
From the upper menu ensure that the Auto Download button is switched off, in this way there will be no attempt by
the logger to extract data. Then activate the Ethernet by pressing the E button
Press here to activate Ethernet
Press Next to skip this window. Because you
are not planning to capture data it is not
necessary to enter any information.
Switch OFF the Auto download button
Press Start to initiate the Ethernet link. Because you
are not planning to capture data it is not necessary to
enter any information, or select a Car – Example
window shown is Manual Method
If you have not already Run the DK-Link program you will be presented with the
following notice. Press Run to activate DK-Link which will appear at the bottom of
your screen as a new window.
If all is configured and connected correctly DK link will show the presense of a data logger similar to the image
shown below, and the bottom right of your computer screen will show the logger table name and the Alias of the
device.
Logger table + Alias
data view_std_manual v1.4.doc Digitek Spa Digitek Spa