Download - Little, Big Racing

R&S Business Unit Automotive
4.6 – Automatic download / Run system
In this mode you should have the following system configurations.
• Capture / Acquisition files / Options – Set Run System
• Capture / Setup Acquisitions – Auto download switched ON
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
DATAVIEW Pg. 40/133
Press the E button on the upper tool bar to display the following window.
You are given the opportunity to make any adjustments to the data you
have already entered.
For more information when selecting the Track & Session and the Run
system, refer to section 3.3
Press Next to continue
This window shows all 4 of the possible pre-programmed vehicles. In this
example, only CAR_2 has been configured within Capture / Acquisition
Files / Cars to associate with a logger with Alias – Cobra
Press Start to establish communication with the logger & begin the
download process. Correct communication is shown by the bottom left of
the screen stating ‘fast Ethernet download enabled and the following
window being shown.
Yes – This will download any new data that has been created since the last
download.
No – This will open a list of available data, individual laps may be selected
in the same way as the manual download.
Cancel – Cancel download operation
Note : The data files used in the Run system have less
identification information than those for the manual system
simply because they are already stored in the correct folder for
Track / Session / Alias
Day Month
Year
Run
data view_std_manual v1.4.doc Digitek Spa Digitek Spa