Download - Little, Big Racing

R&S Business Unit Automotive
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
DATAVIEW Pg. 39/133
4.5 – Automatic download / Manual system (Cobra & Shark – Direct cable download)
In this mode you should have the following system configurations.
• Capture / Acquisition files / Options – Set to Manual System
• Capture / Setup Acquisitions – Auto download switched ON
Press the E button on the upper tool bar to display the following
window. You are given the opportunity to make any adjustments
to the data you have already entered.
Press Next to continue
Ensure that you have selected the correct Car from the pull down
menu. The Connection shown at the bottom of this window will
indicate if the correct device is available on the network
Press Auto to use the default download directory and create a
unique file name.
File names for car_1 will end in C0, car_2 will end in C1, car_3
will end in C2, car_4 will end in C3.
Each new download using this file name will create a new run
number that is attached to the end of the file name as _RUN0x
You are completely free to type in your own file name and use an
alternative data directory.
Press Start to establish communication with the logger & begin the download process. Correct communication is
shown by the bottom left of the screen stating ‘fast Ethernet download enabled and the following window being
shown.
Yes – This will download any new data that has been created since the last
download.
No – This will open a list of available data, individual laps may be selected
in the same way as the manual download.
Cancel – Cancel download operation
data view_std_manual v1.4.doc Digitek Spa Digitek Spa