Download - Little, Big Racing

R&S Business Unit Automotive
4.4 – Manual download / Run system
In this mode you should have the following system configurations.
• Capture / Acquisition files / Options – Set Run System
• Capture / Setup Acquisitions – Auto download switched OFF
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
DATAVIEW Pg. 37/133
Press the E button on the upper tool bar to display the following window.
You are given the opportunity to make any adjustments to the data you
have already entered.
For more information when selecting the Track & Session and the Run
system, refer to section 3.3
Press Next to continue
This window shows all 4 of the possible pre-programmed vehicles. In this
example, only CAR_2 has been configured within Capture / Acquisition
Files / Cars to associate with a logger with Alias – Cobra
Press Start to establish communication with the logger. Correct
communication is shown by the bottom left of the screen stating ‘fast
Ethernet download enabled’ and the E button on the tool bar will turn red.
To view the data in the logger memory, select Capture / data logger manager / select laps, or press this button on
the toolbar.
Highlight the laps (data) you want to download and then press the
Download button.
Multiple laps can be downloaded using the CTRL or arrow keys in
the normal Windows way.
At the end of download your last lap of data will be automatically
loaded into the data header bar at the top of the screen.
Note : The data files used in the Run system have less
identification information than those for the manual system
simply because they are already stored in the correct folder for
Track / Session / Alias
Run
data view_std_manual v1.4.doc Digitek Spa Digitek Spa