Download - Little, Big Racing

R&S Business Unit Automotive
3.2 Capture / acquisition files / options / manual
Via L.Romagnoli, 24 - 41033 Concordia sulla Secchia (Modena) Italy
Tel.: +39 0535 57711 (r.a.) - Fax.: +39 0535 54550
Uffici amministrativi: Via G. Brodolini, 35 - Fax.: +39 0535 54533
Email : guest@digitek.it - Internet : http://w w w .digitek.it
Select Capture / acquisition files / options tab to display the following window.
DATAVIEW Pg. 24/133
The entire capture system is based around the possibility of connecting to 4 different vehicles, each vehicle having a
known driver. These are referred to as Car_1 to Car_4. This is the default setting for Data View
Choose - Manual
Cannot be edited in manual mode
Cannot be edited in manual mode
Used for ‘off ground’ testing of the car,
accumulated distance not recognised.
It is recommended to leave at 0
Run recognition - Whenever a new Run is incremented the download process will create a completely new and
separate data file. If switched off, all data downloads from that logger will be included within the same file.
Car recognition – When switched off, the Alias and identification of the logger is not considered.
Note:
• In this manual mode the user is given full control over data file naming, file locations and device connection.
• Device recognition is not featured in this manual mode.
data view_std_manual v1.4.doc Digitek Spa Digitek Spa