BioSciences - Polysciences, Inc.

52
Histology & Microscopy
BioSciences
Epoxy Resin Removal Kit ....................................................
Quickly removes epoxy resin from thin sections in five minutes under mild
conditions preserving delicate immunogenicity of specimens.
Kit contains: 100ml of solution A and 3ml of solution B
Technical Data Sheet #440 Stain Tech. 65, 205 (1990); Mikroscopie, 42, 315 (1985)
Ethylene glycol diglycidyl ether (Quetol 651) [2224-15-9] H5g ....................
MW 174.2 bp 112°/4.5mm n20
D 1.463 TSCA
Crosslinker for carboxyl-, amine- and hydroxyl- functional polymers. Material is
~ 100% active and contains higher molecular weight compounds having chloropropylene
segments produced by reaction with more than one epichlorhydrin
molecule per hydroxyl in synthesis. Histochemical Journal, 20, 222 (1988)
Methyl Methacrylate Embedding and Casting Kit CHOV7m ......................
Resin cures thermally (preferably under pressure) under anaerobic conditions and
is capable of producing the highest quality hard, clear, colorless castings.
Kit contains: 3 kg methyl methacrylate, 1 kg poly(methyl methacrylate) powder,
30 g catalyst
Methyl Methacrylate-Butyl Methacrylate Embedding Kit HU7g ...................
For electron microscopy. Can be used to embed tissue for thin or thick sectioning.
By varying butyl methacrylate amount in embedding mix, block hardness is
changed. Can be UV catalyzed. Technical Data Sheet #408
Kit Contains: 2x500gm of methyl methacrylate, 1x500gm of butyl methacrylate,
1 x 8gm benzoyl peroxide 70%, 1 x 10gm benzoin methyl ether.
PEG 4000 Resin [25322-68-3] A2g .............................................
mp 53-56º
This water soluble, nonionic material is used like paraffin to infiltrate and embed
tissue. Easily removed from sections with 95% ethanol for immunocytochemical
and x-ray microanalytical techniques. Technical Data Sheet #279
J. Cell Biol., 95, 101a (1982); Biol. Cell, 44, 85 (1982)
PolyCut-Ease A2g ..........................................................
The addition of 1% PolyCut-Ease to any epoxy embedding recipe will enable many stress free sections
to be cut from a single area of a knife. It preserves the life of your diamond knife edge as it
markedly reduces friction of the knife as it cuts through the plastic. The additive will not change the
block color or EM image quality. Does not contain Silicone. Technical Data Sheet #385
H.J. of EM Tech., 3, 217 (1986)
For more information please call (800) 523-2575 or visit: polysciences.com
Catalog # Size
21487-1 1 kit
01479-100 100 g
23679-1 1 kit
03573-1 1 kit
16861-250 250 g
18615-100 100 ml