BioSciences - Polysciences, Inc.
BioSciences - Polysciences, Inc.
BioSciences - Polysciences, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
46<br />
Histology & Microscopy<br />
<strong>BioSciences</strong><br />
Batson’s #17 Anatomical Corrosion Kit<br />
Batson’s #17 Anatomical Corrosion Kit CFM7dw<br />
Low viscosity, acrylic-based resin system for room temperature preparation of anatomical corrosion<br />
castings. After hardening, tissue is corroded away by caustic solution, yielding a durable, scientifically<br />
exact model for anatomical study. Technical Data Sheet #105<br />
Kit Contains: 940ml monomer base, 2x100ml catalyst, 50ml promotor, 10g pigment red,<br />
10g pigment blue<br />
Fahrenbach, W.H., et al., J. Elec Microsc. Tech., 10, 15 (1988); Pollitt, C.C. & Molyneux, G.S., Equine Vet. J., 22(2), 79 (1990);<br />
Redmond H. P. et al., Brit. J. Surgery, 76(2), 198 (1989)<br />
For more information please call (800) 523-2575 or visit: polysciences.com<br />
Catalog # Size<br />
Anatomical Corrosion Kit 07349-1 1 kit<br />
Additional kit components:<br />
Blue pigment 07352-100 100 g<br />
Catalyst 02608-100 100 ml<br />
Green pigment 07353-100 100 g<br />
Maceration solution 07359-940 940 ml<br />
Monomer base solution 02599-940 940 ml<br />
Promoter 02610-50 50 ml<br />
Red pigment 07350-100 100 g<br />
White pigment 07351-100 100 g<br />
Yellow pigment 07354-100 100 g<br />
Embed-It Low Viscosity Epoxy Kit<br />
Embed-It Low Viscosity Epoxy Kit [64-86-8] g .................................<br />
A modification of the Spurr’s formulation, Embed-It Low Viscosity Epoxy Kit<br />
can be used for embedding biological, material and mineralogical samples.<br />
This kit is composed of two very low viscosity components (~65cps) packaged<br />
in easy to dispense squeeze top bottles. Components are mixed in equal parts<br />
by weight to make the infiltration and embedding resin. The resin readily penetrates<br />
into the specimen and cures to a clear hard solid overnight at 60°C.<br />
Benefits:<br />
• Easy To Use - Mix Only 2 Components in Equal Proportions<br />
• Save Time - Prepare the Embed-It Resin for Both Infiltration and Embedding<br />
• Convenient - Mix Only the Amount You Need<br />
• Less Hazardous - Components Ship Together As Non-Hazardous Materials<br />
Kit Contains: 100mL of each component Technical Data Sheet #622<br />
Immuno-Bed Embedding Kits & Reagents<br />
Immuno-Bed Kit FGHO6g ....................................................<br />
Immuno-Bed has been designed for use with immunohistochemistry (IHC) studies.<br />
The system allows adequate penetration of small molecular weight antibodies and<br />
chromogens, such as aminoethylcarbazole (AEC). Large molecular weight molecules<br />
may not stain well, even after etching the plastic from the section. Sections<br />
should be completed and stained as soon as possible after polymerization is complete,<br />
within 2 to 3 days. Immuno-Bed is a glycol methacrylate based embedding<br />
kit with performance similar to JB-4 ® and JB-4 Plus ® in tissue infiltrations, embedding<br />
and cutting procedures. The embedded blocks are clear for excellent tissue<br />
visibility. Polymerization at 0-4°C is recommended to reduce the heat generated<br />
by the exothermic reaction. Technical Data Sheet #302<br />
Kit Contains: 800ml Solution A, 30ml Solution B, and 12g Benzoyl Peroxide Plasticized.<br />
Immuno-Bed Solution A HO4g ...............................................<br />
Immuno-Bed Solution B A2g .................................................<br />
Immuno-Bed Benzoyl Peroxide Plasticized (Catalyst) FHG5g .......................<br />
24300-1 1 kit<br />
17324-1 1 kit<br />
17325A-800 800 ml<br />
17325B-30 30 ml<br />
17325C-12 12 ml
Change language