BioSciences - Polysciences, Inc.

Histology & Microscopy
BioSciences
Peel-A-Way ® Tissue Capsules .................................................
Resistant to most chemicals and acids used in processing. Provides three
compartments for average size specimens and a removable divider for larger
(34mm) specimens. They are weighted to assume upright position for complete
exposure during processing. Use with all epoxy, GMA, MMA and acrylic resins.
12 pieces per carton. Technical Data Sheet #433
Polyetheylene Molding Trays for Resins
Polyethylene Molding Cup Trays
Light-weight, durable plastic trays, ideal for resin molding specimen blocks with JB-4 ® and other
resins. Use in conjunction with Polysciences’ popular and inexpensive block holders and chucks. Also
use with Immuno-Bed, L.R. White, L.R. Gold, Micro-Cut and GemCut ® paraffins.
Catalog # Size
Polyethylene Molding Cup Trays, 12x16x5mm (20 cavities) 16643B-1 1 unit
Polyethylene Molding Cup Trays, 13x19x5mm (9 cavities) - Set of 3 17177C-3 3 trays
Polyethylene Molding Cup Trays, 2x15x5mm (9 cavities) - Set of 3 17177B-3 3 trays
Polyethylene Molding Cup Trays, 6x12x5mm (20 cavities) 16643A-1 1 unit
Polyethylene Molding Cup Trays, 6x8x5mm hexagon (9 cavities) - Set of 3 17177A-3 3 trays
Polyethylene - Light Microscopy
Embedding Mold Trays
For JB-4 ® , JB-4 Plus ® , Immuno-Bed, L.R.-White ® , L.R.-Gold ® or Paraffin embedding. This is an
embedding system of reusable molds and trays with colored stubs.
Embedding Mold Trays 23188-1 10 trays
Embedding Mold, Polyethylene, Light Microscopy - 12mm x 8mm 23184-1 100 molds
Embedding Molds, Polyethylene, Light Microscopy - 16mm x 8mm 23185-1 100 molds
Embedding Molds, Polyethylene, Light Microscopy - 19mm x 13mm 23186-1 100 molds
Embedding Stubs, Polyethylene, Light Microscopy - 10mm thick - mixed 23197-1 100 stubs
Embedding Stubs, Polyethylene, Light Microscopy - 4mm thin - white 23189-1 100 stubs
Polyethylene Molding Cup Trays, 12x16x5mm (20 cavities)
Light-weight, durable plastic trays, ideal for resin molding specimen blocks with JB-4 ® and other
resins. Use in conjunction with Polysciences’ popular and inexpensive block holders and chucks.
Polyethylene Molding Cup Trays, 12x16x5mm (20 cavities) 16643B-1 1 unit
Polyethylene Molding Cup Trays, 13x19x5mm (9 cavities) - Set of 3 17177C-3 3 trays
Polyethylene Molding Cup Trays, 2x15x5mm (9 cavities) - Set of 3 17177B-3 3 trays
Polyethylene Molding Cup Trays, 6x12x5mm (20 cavities) 16643A-1 1 unit
Polyethylene Molding Cup Trays, 6x8x5mm hexagon (9 cavities) - Set of 3 17177A-3 3 trays
Silicone
Embedding Molds - Silicone, Flat, Numbered Cavities - Opaque ..................
Produced from opaque silicone rubber. Durable and flexible with 21 consecutively
numbered shaped cavities. Molds have high thermal and chemical resistance. Use
with epoxy based resins, Araldite resins, Embed-It , Spurr Low Viscosity Embedding
Kit and Ultra Low Viscosity Embedding Kit. Mold dimensions: 69mm x
90mm, cavity dimensions: 5mm x 12mm x 4mm.
19802A-1 1 carton
23258-1 1 mold
For more information please call (800) 523-2575 or visit: polysciences.com 23