BioSciences - Polysciences, Inc.

Histology & Microscopy
Capsule Holders (BEEM ® )
For holding capsules upright during polymerization. Holds 22 capsules in
numbered cavities. Made from an epoxy resistant material that embedding
media will not stick to. Also suitable for gelatin capsules. Cavities may be
illuminated from below to facilitate specimen orientation.
BioSciences
Catalog # Size
Capsule Holders (BEEM ® ), Regular (heat curing) for Size 00 capsules 0256A-3 3 holders
0256A-12 12 holders
Capsule Holders (BEEM ® ), Regular (heat curing) for Size 3 capsules 0256B-3 3 holders
0256B-12 12 holders
Capsule, Micron Micromolds .................................................
Self supporting unit of 10 size 00 conical end capsules in numbered positions
for economical embedding. The Capsules are self supporting and do not require
additional holders. The mold is made from polyethylene and gives pre-shaped
blocks with 1mm square tips similar to BEEM capsules. The blocks are easy to
remove and require little or no final trimming. Use with JB-4 ® /JB-4 ® Plus, Osteo-
Bed/Osteo-Bed Plus and other GMA or MMA resins.
Capsules, Embedding
Economical and convenient method for producing resin blocks. UV transparent, ideal for UV
Polymerization of acrylic resins. Can be used with most resins. Capsules have snap-shut lids which
cannot slide off accidentally. Capsules are also useful for storing grids and TEM calibration specimens.
Capsules, Embedding, Gelatin, Size 00 00225-1000 1000 /pkg.
Capsules, Embedding, Gelatin, Size 1 (19.0mm long x 6.63mm wide; .50ml volume) 07347-1000 1000/pkg.
Capsules, Embedding, Gelatin, Size 4 (13.9mm long x 5.05mm wide; .21ml volume) 07348-1000 1000/pkg.
Embedding Molds - Chien, Universal ..........................................
Allows up to 16 tissue samples to be sectioned both on lateral and transverse
planes without re-embedding. Can also be used as a general flat embedding
mold. Casts made from this mold can be used on Leica/Reichert, LKB and most
EM Microtomes with flat embedment chucks. Use with epoxy based resins,
Araldite resins, Embed-It , Spurr Low Viscosity Embedding Kit and Ultra Low
Viscosity Embedding Kit.
Disposable - PVC
New! Disposable Base Molds ................................................
Disposable base molds offer ease and convenience. Inexpensive enough to be discarded after use,
yet strong enough to be reused. They offer excellent thermal exchange, and have a smooth interior
finish and rounded corners to facilitate specimen removal. Use with paraffins and PolyFreeze tissue
freezing medium.
Disposable Base Molds (15x15x5 mm)
Disposable Base Molds (30x24x5 mm)
Disposable Base Molds (37x24x5 mm)
Disposable Base Molds (37x24x5 mm)
Disposable Base Molds (7x7x5 mm)
08408-50 50 units
19440-1 1 mold
25375-500 500 molds
25375-500 500 molds
25377-500 500 molds
25376-500 500 molds
25378-500 500 molds
25374-500 500 molds
For more information please call (800) 523-2575 or visit: polysciences.com 21