BioSciences - Polysciences, Inc.

20
Histology & Microscopy
BioSciences
New! Wrinkle Out Water Bath Solution .......................................
Use in place of normal or distilled water for waterbath when cutting paraffin
sections and pick up wrinkle free ribbons and sections on the slide.
May be used in place of normal water bath fill solution. Changes the
water surface tension so tissue spreads evenly without wrinkles when
using paraffin that is of lower quality than polymer fortified paraffins on
the market.
Top: wrinkled and compressed paraffin ribbon placed in
normal water bath filled solution.
Below: paraffin ribbon in Wrinkle Free Water Bath Solution.
Wrinkles disappear and compression is gone, allowing the
tissue to flatten due to the change in water surface tension.
Embedding Molds
BEEM
Beem ® Embedding Capsules, Size 00
Polyethylene BEEM ® capsules are the most commonly used embedding capsules for all types of resins.
The embedding block requires little or no trimming. The closed capsules are UV transparent for
polymerization of acrylics. In addition to the two standard 3 and 00 sizes, we have the conical and
bottle-necked 00 sized designs for centrifuged material embedding. These capsules can withstand
up to 600 G. Be sure to use our capsule holders and capsule press for convenient use of these versatile
capsules. Use with JB-4 ® , Immuno-Bed (GMA), Osteo-Bed, Osteo-Bed Plus (MMA) and other
resins that do not polymerize well in conventional silicone rubber molds.
For more information please call (800) 523-2575 or visit: polysciences.com
Catalog # Size
Beem ® Embedding Capsules, Size 00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00224-100 100 caps
00224-500 500 caps
00224-1000 1000 caps
BEEM ® , Flat, Transparent ....................................................
Manufactured from transparent polyethylene. Useful for embedding media
such as JB-4 ® , glycol methacrylate and other methacrylates which do not
polymerize well in conventional silicone rubber molds. The transparency
of the mold permits accurate specimen orientation when illuminated from
below. The molds are flexible and reusable. Each mold is supplied in a
protective plastic case. Cavity dimensions: 2.54mm x 5.33mm x 12.32mm
Capsules, Embedding, BEEM ®
Polyethylene BEEM ® capsules are the most commonly used embedding capsules for all types of resins.
The embedding block requires little or no trimming. The closed capsules are UV transparent for
polymerization of acrylics. In addition to the two standard 3 and 00 sizes, we have the conical and
bottle-necked 00 sized designs for centrifuged material embedding. These capsules can withstand
up to 600 G. Be sure to use our capsule holders and capsule press for convenient use of these versatile
capsules. Use with JB-4 ® , Immuno-Bed (GMA), Osteo-Bed, Osteo-Bed Plus (MMA) and other
resins that do not polymerize well in conventional silicone rubber molds.
Capsules, Embedding, BEEM ® - For Size 00 bottle necked 00295-100 100 caps
Capsules, Embedding, BEEM ® - For Size 00 conical capsules 00294-100 100 caps
Capsules, Embedding, BEEM ® - For Size 3 capsules 00336-100 100 caps
Capsule (BEEM ® ) Block Storage Box ...........................................
Holds up to 10 polymerized size 00 blocks in numbered compartments.
Contained in a protective hinged case to avoid dust contamination.
25383-1 1 gal
25383-2 2 x 1 gal
23257-1 1 mold
03604-10 10 boxes