Download Brochure - Stoproc

1. Your table will have four levellers,
one per leg.Place the table on its
side.Remove one of the levellers,
adjust the remaining levellers so
that when the Stoproc is fitted and is
set to the top position, the table
will rock towards the Stoproc.
NEW
T: +27 (0) 31-266-6434
C: +27 (0) 83-7777-824
E: gild@stoproc.com
W: www.stoproc.com
A.
2. Fit the Stoproc in place of
the leveller that was removed
making sure that it is on the
left hand side of the leg when
facing you and that its rotation
is towartds you.
South African Agents International Agents
Fax:
E-mail: sales@hedcor.co.za
Web:
+27 (0) 31-205-9391
+27 (0) 31-205-2551
www.hedcor.co.za
Description
3. Insert a matching bolt and
washer together with the Stoproc
and attach it to where the leveller
was removed, tightly secure it
in place by holding the bracket
against the sidewall of the leg.
Fax:
E-mail: info@eclipsegroup.co.za
Web:
+27 (0) 11-444-8118
+27 (0) 86-502-5971
www.eclipsegroup.co.za
Main data
AB CD 20’ FC (PCS)
“Providing intelligent furniture solutions”
Fax:
E-mail:
Web:
+603- 4041- 6168
+603- 4044- 2318
enquiries@kian.com
www.kian.com
Packing Quantity
Table Base (mm) 762mm 56.85mm 76.2mm 92.61mm 1088
Table Base (in) 30 in 2.23 in 3 in 3.65 in
4. Rotate the Stoproc towards
you until it touches the floor,
“the Roc Stops here”.
Stoproc will hold its position
should the table be moved. If it
requires adjustment, follow the
steps above (4)...
30” Glass Filled Nylon Base
Weight 1.85kg4 .08 Lbsm ass1 .444cm3P A6 + 30% GF
The Retro Fit
This is an after market product designed
to fit existing tables. Simply remove one leveller and
replace with a Stoproc - one per table base.
(Does not fit all types of tables)
Description
25” Aluminium
Main data
Packing Quantity
A 20’ FC (PCS)
Table Base (mm) 63.5mm 1360
Table Base (in) 25 in
Weight 1.6kg