ZAHNA Fliesen - Ceramic Solutions

eferences
� re brigade dairy brewery
food industry
car wash catering bakery meat processing
product segments
High Traffic
These are hard-wearing floor tiles for
the highest point loads. With their
hardness and durability, ZAHNA
floor tiles are ideal for use in supermarkets,
car workshops and industrial
structures.
The vibratory installation method is a
rational and superior method of laying
tiles rapidly and economically over
large surface areas.
pharmaceut. industry
Safety
car dealership
This is the range of non-slip and
secure-grip floor tiles. Employers‘
liability insurance associations prescribe
a specific quality for flooring
to avoid industrial accidents. Thanks
to differing tile surface profiles,
ZAHNA Safety floor tiles achieve
anti-slip prop erties of R9 to R13 and
grip depths of V0 to V10. The range
is completed with a special series for
wet, barefoot areas.
Resistant
supermarket
car repair shop
These are our hard-wearing hexagonal
floor tiles which, due to their resistance
to acids and alkali, are finding in creased
use in light and heavy acid-proof
con struction and in the chemical
industry. The tile shape with special
spacers ensures that a secure flooring
is created whilst at the same time facilitating
the laying process. ZAHNA Resistant
floor tiles may be laid in abutting
form using the vibratory method.
ZAHNA Fliesen – the ideal surface for every situation
Z-Spacer
The Z-Spacer (Zahnaer-Spacer)
is a profi le formed at regular
intervals on the fl anks of ZAH-
NA tiles. This ensures speedy
installation with a defi ned joint
width, particularly during dry installation
of hexagon and High Traffi c
tiles. The special design of the Z-Spacers
means that the joint gap is continuously
open, thus permitting easy fi lling of the entire
joint. A connection between the mortar bed and
joint compound is thus ensured, especially during
vibratory installation and when preparing electrically-conductive
fl ooring. The Z-Spacer also prevents
chipping along the tile surface during vibratory installation.
Combined with the dimensional accuracy of our products, the Z-Spacer ensures a uniformly narrow gap pattern with a
fi xed joint – a major advantage when preparing a fl oor that complies with relevant quality standards.
technical data (EN 14411 Group BIa) CE
(exception: colour 04 – red uni complies with DIN EN 14411, Group BIb)
physical/technical
properties
1. dimensions and surface conditions
2. water uptake
3. breaking load
4. bending strength
5. resistance against subsurface abrasion
6. frost resistance
7. chemical resistance
Kerasiegel – ZAHNA surface finish
standard surface
“Kerasiegel” surface finish
Paul-Utzschneider-Str. 1
06895 Zahna
Germany
test standard specified standard test result
ISO 10545-2
ISO 10545-3
ISO 10545-4
ISO 10545-4
ISO 10545-6
ISO 10545-12
ISO 10545-13
≤ 0.5 %
min. 1300 N
min. 35 N/mm 2
max. 175 mm 3
stipulated
min. Class B
We can manufacture unglazed fine stoneware tiles with a ceramic surface
finish on request. The finish is applied to the ceramic fragments in an inseparable
manner during the firing process.
the advantages of the surface finish:
– ceramic sealing of the tile’s surface
– no waterproofing necessary after installation
– reduced soiling
– easy to clean
– elegant silk-matt lustre
– more intensive colour effect
ZAHNA FLIESEN GmbH
Internet: www.zahna-fl iesen.de
E-mail: info@zahna-fl iesen.de
fulfilled
fulfilled
fulfilled
fulfilled
fulfilled
frost resistance
guaranteed (except against
fluorine compounds)
Telephone: +49 (0) 34 924 - 707-0
Fax: +49 (0) 34 924 - 707-39
Status 02/2010
Industrial fl oors
eine starke Idee
High Traffic
Safety
Resistant
advantages of ZAHNA fi ne stoneware tiles
advantages of ZAHNA fi ne stoneware tiles
– pressure resistance and high point loads
– resists abrasion, scoring and scratching
– sure footing, anti-slip
– suitable for the production of pseudo-conductive fl ooring
– frost resistance
– rapid vibratory installation with Z-Spacers
– resistant to oil, grease, acids and alkalis
– suitable for chemically-resilient and hygienicallysensitive
areas
– colourfast
– hard wearing and easy to clean
22 mm
In the overall tile and subfl oor system, the subfl oor is always the weaker
component. The weight distributing effect of tiles depends on their thickness.
The load required to cause breakage also grows as tile thickness increases.
A sure choice of tiler and anticipated point loads can mean only one thing:
High Traffi c tiles from Zahna.
The fl oor in industrial and commercial buildings is
taken for granted and often practically ignored.
However, it pays off to be familiar with the required
properties and characteristics when selecting fl ooring
and to consider these when reaching purchasing
decisions.
Planners and architects who set the highest of
requirements in industrial construction have long
turned to unglazed fl ooring from ZAHNA FLIESEN
GmbH, due to its excellent technical and aesthetic
characteristics.
ZAHNA FLIESEN GmbH offers a comprehensive
product range in over 30 colours for problem solutions
in almost all areas of industrial, commercial and public
premises and private areas.
Different tile surface profi les mean that anti-slip
properties of R9 to R13 and grip depths of up to V10
can be achieved.
The product range is thus designed to supply building
contractors, tilers, architects and industrial fl ooring
design retailers with the right product from a single
source. They can rely completely at all times on a single
supplier.
Ceramic is also excellent as a cost-effective fl ooring
material. Initial additional material, installation and
renovation costs amortise rapidly over the relatively
maintenance-free service life.
ZAHNA Fliesen – the ideal ceramic surface for every
situation
11 mm
37 mm
18.5 mm