Pneumatic tools - Unior
Pneumatic tools - Unior
Pneumatic tools - Unior
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Pneumatic</strong> <strong>tools</strong><br />
www.unior<strong>tools</strong>.com
Warning!<br />
• Read instructions before<br />
using the tool!<br />
• Always wear<br />
protective equipment!<br />
Future <strong>tools</strong><br />
Have you ever asked yourself why modern industrial<br />
plants and workshops are equipped with pneumatic<br />
and not with electric hand <strong>tools</strong>?<br />
Such <strong>tools</strong> have a lot of advantages over electric<br />
<strong>tools</strong> due to its safety, duration, and economy.<br />
Up until now, these <strong>tools</strong> have convinced many<br />
vehicle painters, welders or construction workers, but<br />
they found their place also in industrial manufacturing<br />
and in the process of setting up various products.<br />
<strong>Unior</strong>’s pneumatic <strong>tools</strong> are a welcome addition<br />
during hard work on steel constructions, bridges<br />
and in shipbuilding. There are always tasks which<br />
demand feeling and accuracy, or diffi cult-to-reach<br />
places which cannot be reached with larger <strong>tools</strong>.<br />
With <strong>Unior</strong>’s pneumatic <strong>tools</strong>, each task will be mastered<br />
properly and with feeling, and you will save<br />
hours of time-consuming handwork.
Why pneumatic <strong>tools</strong>?<br />
Economy<br />
The advantage over pneumatic <strong>tools</strong> can already be noticed<br />
on the electricity bill. It is considerably lower when these<br />
<strong>tools</strong> are used intensely, because the compressor for the<br />
production of certain kinetic energy uses less electricity than<br />
an equal sum of electric <strong>tools</strong>.<br />
Durability<br />
<strong>Pneumatic</strong> <strong>tools</strong> last for hours of uninterrupted intense work<br />
and have longer useful life than electric <strong>tools</strong>. Because they<br />
do not have a motor, they cannot overheat and overload.<br />
Practically they do not need any maintenance.<br />
Safety<br />
There is no risk of electrical stroke or explosion – among all<br />
working appliances with their own propulsion, pneumatic<br />
<strong>tools</strong> are the safest and can be used with no hesitation also in<br />
damp places or wet surfaces.<br />
Ergonomics<br />
Because there is no (electro) motor that could hinder work,<br />
planners can closer the form to ideal ergonomic shape and<br />
intended use. For the same reason, pneumatic <strong>tools</strong> are<br />
lighter than electric <strong>tools</strong>, which is especially important<br />
when working with the <strong>tools</strong> the whole day.<br />
2 leti garancije<br />
High quality<br />
2 years of Guarantee<br />
Visoka kakovost<br />
2 leti garancije<br />
Legend of symbols used in<br />
catalogue<br />
Code<br />
Weight in grams<br />
Dimension<br />
Number of items<br />
Outer dimension in mm<br />
1/2” point<br />
3/8” point<br />
3/4” point<br />
1” point<br />
1. 1/2” point<br />
High quality<br />
2 years of Guarantee<br />
Contact information<br />
UNIOR d.d.<br />
Kovaška cesta 10, 3214 ZREČE, Slovenia<br />
T: +386 3 757 81 00<br />
F: +386 3 576 26 43<br />
I: www.unior<strong>tools</strong>.com<br />
E: sales@unior.si<br />
Photographs in this catalogue are symbolic.
4<br />
Air supply<br />
Maximum air pressure: 9,5 bar<br />
How to connect Uni<br />
1/4”<br />
617735 Art. 1500<br />
3/4”<br />
621473 Art. 1503<br />
3/8”<br />
617736 Art. 1501<br />
1/2”<br />
617737 Art. 1502<br />
How to fasten with the right wrench?<br />
1506KN7 617795 1/4" 20<br />
1506KN7 617796 3/8" 20<br />
1506KZ7 617793 1/4" 20<br />
1506KZ7 617794 3/8" 20<br />
1506KZ10 621452 3/8" 24<br />
1506KZ10 621453 1/2" 24<br />
1506KZ10 621454 3/4" 27<br />
1507Z7 617797 1/4” 14<br />
1507Z7 617798 3/8” 19<br />
1507Z7 618483 1/2” 22<br />
1507Z10 621455 3/8" 17<br />
1507Z10 621456 1/2" 24<br />
1507Z10 621457 3/4" 27<br />
1/4”<br />
617793 Art. 1506 KZ7<br />
Alternative connection between article 1508 A and 1508 B when working on the cleanest surfaces (for example the dashboard of a car).<br />
3/4”<br />
621454 Art. 1506 KZ10<br />
3/8”<br />
617794 Art. 1506 KZ7<br />
621452 Art. 1506 KZ10<br />
1/2”<br />
621453 Art. 1506 KZ10<br />
Code Inlet thread mm<br />
1/4”<br />
617797 Art. 1507 Z7<br />
3/8”<br />
617798 Art. 1507 Z7<br />
621455 Art. 1507 Z10<br />
1/4” = 617743 (6.5x10/9m)<br />
1/4” = 617744 (8x12/9m)<br />
1/4” = 617746 (6.5x10/12m)<br />
1/4” = 617747 (8x12/12m)<br />
3/8” = 617745 (11x16/9m)<br />
3/8” = 617748 (11x16/12m)<br />
Art. 1505<br />
1/4”<br />
3/8”<br />
617767 Art. 1508 A<br />
617768 Art. 1508 B
or <strong>Pneumatic</strong> <strong>tools</strong>?<br />
1/4”<br />
617793 Art. 1506 KZ7<br />
3/8”<br />
617794 Art. 1506 KZ7<br />
621452 Art. 1506 KZ10<br />
1/4”<br />
617797 Art. 1507 Z7<br />
1/2”<br />
618483 Art. 1507 Z7<br />
621456 Art. 1507 Z10<br />
3/8”<br />
617798 Art. 1507 Z7<br />
621455 Art. 1507 Z10<br />
1/4”<br />
617728 Art. 1517 P<br />
1/4”<br />
617729 Art. 1517 S<br />
1/4”<br />
615320 Art. 1541<br />
1/4”<br />
615322 Art. 1561<br />
1/4”<br />
615319 Art. 1551<br />
1/4”<br />
615321 Art. 1562<br />
1/4”<br />
615324 Art. 1571<br />
1/2”<br />
615325 Art. 1591<br />
1/2”<br />
615326 Art. 1592<br />
1/2”<br />
617690 Art. 1596<br />
1/2”<br />
617691 Art. 1597<br />
3/8”<br />
615323 Art. 1572<br />
www.unior<strong>tools</strong>.com<br />
1/4”<br />
617733<br />
617713 Art. 1510<br />
1/4”<br />
617714<br />
617715 Art. 1514<br />
1/4”<br />
617726 Art. 1515<br />
1/4”<br />
617727 Art. 1515 H<br />
1/4”<br />
617731 Art. 1516<br />
1/4”<br />
617732 Art. 1516 A<br />
1/4”<br />
615318 Art. 1531<br />
1/4”<br />
617730 Art. 1518<br />
Art. 1205/1<br />
610501 D = 115 mm<br />
610502 D = 125 mm<br />
Art. 1205/2<br />
610505 D = 115 mm<br />
610506 D = 125 mm<br />
Art. 1207/2<br />
610509 D = 115 mm<br />
610510 D = 115 mm<br />
610511 D = 125 mm<br />
610512 D = 125 mm<br />
617718 Art. 1514 A1<br />
617719 Art. 1514 A2<br />
617720 Art. 1514 A3<br />
617721 Art. 1514 A4<br />
617722 Art. 1514 A5<br />
617723 Art. 1514 A6<br />
Art. 1200/1<br />
610484 D = 115 mm<br />
610485 D = 125 mm<br />
Art. 1200/2<br />
610488 D = 115 mm<br />
610489 D = 125 mm<br />
Art. 1202/2<br />
610492 D = 115 mm<br />
610493 D = 115 mm<br />
610494 D = 125 mm<br />
610495 D = 125 mm<br />
Art. 1216<br />
610539 D = 115 mm<br />
610540 D = 115 mm<br />
610541 D = 115 mm<br />
610542 D = 115 mm<br />
610543 D = 115 mm<br />
610544 D = 125 mm<br />
610545 D = 125 mm<br />
610546 D = 125 mm<br />
610547 D = 125 mm<br />
610548 D = 125 mm<br />
5
6<br />
<strong>Pneumatic</strong> sander<br />
1510<br />
For a perfect surface<br />
The advantage of this silent and compact tool is its ergonomically shaped handle, which allows<br />
good grip and prevents slipping, on the other hand it is suitable for left-handers as well<br />
as for right-handers. The sander has an additional function of sucking dust that is produced<br />
during work. It is also distinguished with a handy switch and a silent and powerful drive. It<br />
operates on the principle of eccentric circular moves without producing vibrations. On the<br />
working platform, the pneumatic sander does not leave edges and is therefore suitable for<br />
larger surfaces. An integrated speed regulator allows all kinds of works – from aggressive<br />
sanding to soft smoothening during fi nishing works.<br />
<strong>Pneumatic</strong> sander<br />
• Free speed 10.000 revolutions<br />
per minute<br />
• Maximum working<br />
pressure: 6.2 bar<br />
• Air consumption: 212 l/min<br />
• Air inlet: 1/4”<br />
• VELCRO sander pad<br />
No. L A D<br />
617733 2.5 220 105 150 1186<br />
617713 5 220 105 150 1186<br />
Advantages<br />
• The ergonomic shape of the handle enables good<br />
grip and prevents gliding<br />
• Suitable for left-handers as well as for right-handers<br />
• Silent and powerful drive<br />
• Handy on/off switch<br />
• Exhaustion of parts into a bag for a cleaner workplace<br />
• Flexible and robust pipe for cleaning dust<br />
• It does not leave edges on the working platform<br />
• Better work conditions due to minimal vibrations<br />
• Extreme power based on its weight (1.2 kg)<br />
Use<br />
• Vehicle workshops<br />
• Preparation of different working platforms for<br />
further process<br />
• Ideal for grinding construction steel, metals and wood
The advantage of the sander pad<br />
The VELCRO system for<br />
fastening sander pads<br />
Durable and fiberglasscovered<br />
surface<br />
Operating principle of the sander<br />
It operates on the principle of eccentric circular<br />
moves, as shown in the picture. The VELCRO<br />
system enables a simple fastening of the sanding<br />
pad. An additional exhaust of the sander prevents<br />
dusting in the room.<br />
The basis of sander is VELCRO<br />
system which is: quick,<br />
simple and safe to mount and<br />
unmount various sander pads.<br />
This system is being used for<br />
various occasions - the best<br />
known example is training<br />
shoes with VELCRO fastening.<br />
Suction of dust from the<br />
working platform<br />
Environmentally friendly<br />
polyurethane foam which<br />
prevents vibrations<br />
7
8<br />
Stroke pneumatic hammer<br />
1514<br />
Enormous striking power<br />
The stroke pneumatic hammer is used for repairing and handling of bodywork, cutting body<br />
sheet and screws, removing welds and other things.<br />
Besides that, it is also suitable for working on various types of walls, concrete, stones, bricks,<br />
steel, and alloy of light metals. For each type of material and work, a suitable <strong>Unior</strong> chisel is<br />
needed. The pneumatic stroke hammer has a change retainer, with which change of chisels is<br />
much easier, so the work with such tool becomes more effi cient and safe to use.<br />
Stroke pneumatic hammer<br />
Advantages<br />
• Light and compact tool, used also<br />
in small rooms<br />
• Wide range of use<br />
• Change retainer<br />
Use<br />
• Car industry<br />
• Cutting of sheet metal and screws<br />
• Removal of welds<br />
• Working on walls, concrete, stones,<br />
bricks, steel, light metals<br />
• Used for cutting sheet, bolts and removing<br />
welding slags, rivets, plaster and tiles<br />
• With spring, quick change retainer as spare parts<br />
• Bore diameter: 9.1 mm<br />
• Air consumption: 250 l/min<br />
• Air inlet: 1/4”<br />
stroke per<br />
minute<br />
L A HEX<br />
617714 3000 170 150 10 1600<br />
617715 2100 225 150 10 2400<br />
Spare parts<br />
alternate spring for<br />
art. 1514 (617716)<br />
alternate change<br />
retainer for art. 1514<br />
(617717)
Chisels for stroke pneumatic hammer art. 1514<br />
Pointed chisel 1514 A2<br />
Removing pins and<br />
rivets, making holes.<br />
Rivet and welding slag chisel 1514 A3<br />
Removing rivets and welding slags.<br />
Sheet cutting chisel 1514 A4<br />
Cutting sheet metal.<br />
“v” edge chisel 1514 A5<br />
Cutting sheet metal.<br />
Flat chisel 1514 A1<br />
Shaping and cleaning of welds, trimming of<br />
bolts and nails, production of slots, cleaning<br />
and evening of uneven surfaces.<br />
Spade chisel 1514 A6<br />
Shaping and cleaning of welds, trimming of<br />
bolts and nails, production of slots, cleaning and<br />
evening of uneven surfaces.<br />
9
10<br />
<strong>Pneumatic</strong> drills<br />
1515<br />
Quick change retainer 3/8”<br />
enables simple exchange of<br />
various drills<br />
Less vibrations, more power<br />
The pneumatic drill enables exact drilling into metals. The speed and rotation direction<br />
are adaptable, the handle, made of plastic material, eases the vibrations, which enables<br />
full controlled drilling. This lightweight, handy, but powerful drill is suitable also because<br />
of its quick change retainer. The robust body and qualitative production ensure a long<br />
useful life of the product. <strong>Pneumatic</strong> drills are an ideal working solution in workshops and<br />
industrial manufacturing.<br />
<strong>Pneumatic</strong> drill<br />
Fast switch which needs a minimal<br />
force for turning on the tool<br />
Advantages<br />
• Extreme power based on its size<br />
• Lightweight, compact and easy-to-master tool<br />
• Handy turn-on switch<br />
• Ergonomically shaped handle of plastics material<br />
dampens vibrations<br />
• Reversible turning<br />
• Quick change retainer<br />
Durable housing with very good<br />
weight/power ratio<br />
Simple switching of the<br />
direction of rotation<br />
The handle is soft and protects the<br />
user from “cold” and vibrations.<br />
• Reversible turning<br />
• Free speed: 1.800 revolutions per minute<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 113 l/min<br />
• Air inlet: 1/4”<br />
• Chuck capacity: 1.0 - 10 mm<br />
• Spindle thread: 3/8”, 24 UNF<br />
• Internal hose size: 10 mm<br />
L A<br />
617726 190 150 1150
1515H<br />
<strong>Pneumatic</strong> drill with handle<br />
Quick change retainer 3/8”<br />
enables simple exchange of<br />
various drills<br />
Fast switch which needs a minimal<br />
force for turning on the tool<br />
Advantages<br />
• Extreme power based on size<br />
• Lightweight and easy-to-master tool<br />
• Adjustable handle for better support<br />
• Handy turn-on switch<br />
• Ergonomically shaped handle for<br />
work without effort<br />
• Plastic cover for handle dampens<br />
vibrations<br />
• Reversible turning<br />
• Quick change retainer<br />
Durable housing with very good<br />
weight/power ratio<br />
Simple switching of the<br />
direction of rotation<br />
The handle is soft and protects the<br />
user from “cold” and vibrations<br />
The adjustable handle offers<br />
additional support, prevents<br />
slipping of hands<br />
• Reversible turning<br />
• Free speed: 800 revolutions per minute<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 113 l/min<br />
• Air Inlet: 1/4”<br />
• Chuck capacity: 1.5 - 13 mm<br />
• Spindle thread: 3/8”, 24 UNF<br />
• Internal hose size: 10 mm<br />
L A<br />
617727 220 150 1570<br />
11
12<br />
<strong>Pneumatic</strong> die grinder<br />
1516<br />
Extensive power in small packages<br />
The pneumatic die grinder is meant for fi nishing precision engineering, tooling, car- and aeronautical<br />
industry. It is especially suitable for grinding, polishing, milling, shaping or cleaning<br />
of welds and products of metal, glass, plastic materials or wood. All kinds of standard grind,<br />
polish plugs and grinding caps that are available on the market can be used.<br />
<strong>Pneumatic</strong> die grinder<br />
Advantages<br />
• Safety lever for prevention of accidental<br />
turn-on<br />
• Simple clamping of thin cut-off wheels<br />
(grinding/polishing pins) and other<br />
parts/extensions<br />
• Extreme power based on size<br />
• Lightweight and compact tool<br />
• Continuously variable regulation of rpm<br />
Use<br />
• Precise grinding<br />
• Full grinding<br />
• Tool industry<br />
• Car industry<br />
• Aeronautical industry<br />
• Cleaning of welds<br />
• Cleaning of concrete and wall surfaces<br />
• Cleaning of wooden surfaces<br />
• Removal of colours and varnish<br />
• Removal of rust<br />
• Grinding of bearings<br />
• Grinding of motor valves<br />
• Grinding of gears and coils<br />
• Various other surfaces<br />
Quick change retainer of the grinder<br />
makes the work much easier and<br />
saves time when retaining due to two<br />
enclosed wrenches<br />
Fast and simple<br />
continuously<br />
variable regulation<br />
of rpm<br />
The rubber protecting the<br />
user from vibrations is<br />
soft to the touch<br />
• Free speed 25.000 revolutions per<br />
minute<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 113 l/min<br />
• Air inlet: 1/4”<br />
• Collet capacity: 6 mm<br />
• Internal hose size: 10 mm<br />
L A<br />
Safety lever which prevents<br />
accidental turn-on and<br />
injuries to the user<br />
617731 155 60 390
1516A<br />
<strong>Pneumatic</strong> angle die grinder<br />
The angle type of the pneumatic die<br />
grinder allows us to reach places<br />
unable to reach with standard<br />
pneumatic die grinders.<br />
Advantages<br />
• This angle edition enables access to<br />
difficult-to-reach places which normal<br />
grinders cannot reach<br />
• Safety lever which prevents accidental<br />
turn-on<br />
• Simple clamping of thin cut-off wheels<br />
(grinding/polishing pins) and other<br />
parts/extensions<br />
• Extreme power based on size<br />
• Small and compact tool<br />
• Continuously variable regulation of rpm<br />
Use<br />
• Precise grinding<br />
• Full grinding<br />
• Tool industry<br />
• Car industry<br />
• Aeronautical industry<br />
• Cleaning of welds<br />
• Cleaning of concrete and wall surfaces<br />
• Cleaning of wooden surfaces<br />
• Removal of colours and varnish<br />
• Removal of rust<br />
• Grinding of bearings<br />
• Grinding of motor valves<br />
• Grinding of gears and coils<br />
• Various other surfaces<br />
Fast and simple<br />
continuously<br />
variable regulation<br />
of rpm<br />
Quick change retainer of the grinder makes<br />
the work much easier and saves time when<br />
retaining due to two enclosed wrenches<br />
The rubber protecting the<br />
user from vibrations is<br />
soft to the touch<br />
Safety lever which prevents<br />
accidental turn-on<br />
and injuries to the user<br />
• Free speed: 20.000 revolutions<br />
per minute<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 113 l/min<br />
• Air inlet: 1/4”<br />
• Collet capacity: 6 mm<br />
• Internal hose size: 10 mm<br />
L A<br />
617732 162 76 520<br />
13
14<br />
<strong>Pneumatic</strong> sander<br />
1517S<br />
Advantages<br />
• Light and compact tool<br />
• Suitable for left-handers as well as<br />
right-handers<br />
• Removable handle<br />
• Handy turn-on switch<br />
Adaptability on request<br />
The handy pneumatic angle sander is used for light works in manufacturing, especially in<br />
the car industry.<br />
This angle sander is well-built and equipped with a handle which can be placed on the left<br />
or on the right side of the tool. When trying to work in small and diffi cult-to-reach places,<br />
the handle can be removed.<br />
The polishing paper is placed on the carrying surface of the tool with the help of a fastening<br />
nut, which has to be fastened by hand fi rst and afterwards with the enclosed wrench.<br />
<strong>Pneumatic</strong> angle sander<br />
Use<br />
• Grinding of welds<br />
• Grinding of sharp edges<br />
• Reparation of small uneven surfaces<br />
• Free speed: 4.500 revolutions per minute<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 340 l/min<br />
• Air inlet: 1/4”<br />
• Internal hose size: 10 mm<br />
• Spindle thread: 5/8”<br />
L A D<br />
617729 375 100 175 2165
1517P<br />
<strong>Pneumatic</strong> polisher<br />
Advantages<br />
• Light and compact tool<br />
• Suitable for left-handers as well as<br />
right-handers<br />
• Removable handle<br />
• Handy turn-on switch<br />
Polishing without effort<br />
The pneumatic polisher is used especially in the car industry. The polisher is well-built and<br />
equipped with an adjustable handle which can be placed on the left or on the right side of the<br />
tool. When trying to work in small and diffi cult-to-reach places, the handle can be removed.<br />
This polisher has less rpm than grinding machines; therefore special polishing textile can be<br />
placed on the carrying surface. It is not fastened with a nut, but only with a suction cup to the<br />
polishing textile.<br />
<strong>Pneumatic</strong> angle polisher<br />
Use<br />
• Grinding of welds<br />
• Grinding of sharp edges<br />
• Reparation of small uneven surfaces<br />
• Free speed 2.500 revolutions per minute<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 340 l/min<br />
• Air inlet: 1/4”<br />
• Internal hose size: 10 mm<br />
• Spindle thread: 5/8”<br />
L A D<br />
617728 375 100 175 2165<br />
15
16<br />
<strong>Pneumatic</strong> grinder<br />
1518<br />
Without extra layers<br />
It is used to perform various kinds of work. It removes extra material like rust, colour and<br />
similar very fast. It is suitable for shaping of welds and for grinding various complex forms and<br />
cutting construction materials.<br />
Tool is supplied with replaceable handle and protection from fast spinning parts which protects<br />
the user from injuries of potential fl ying parts.<br />
A tool safety mechanism prevents unwanted switch-on of the tool and so protects the user<br />
from accidental threats or injuries. Saying so, the user cannot turn on the switch by pressing<br />
only the switch, but fi rst has to shift the safety lever which prevents unwanted turn-on.<br />
<strong>Pneumatic</strong> angle grinder<br />
Advantages<br />
• Safety lever prevents unwanted turn-on<br />
• Removable handle<br />
• Protection from rotating parts<br />
• Also usable in small rooms/places<br />
Use<br />
• Tooling<br />
• Cleaning of welds<br />
• Cutting profile carriers and sheet metal<br />
• Cleaning of concrete, walls and wooden<br />
surfaces<br />
• Removal of colours varnish and rust<br />
• Other home use<br />
• Free speed: 11.000 revolutions per minute<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 170 l/min<br />
• Air inlet: 1/4”<br />
• Spindle thread: 3/8”<br />
L A D<br />
617730 230 90 125 1920
<strong>Pneumatic</strong> ratchets<br />
Unlimited ways of use<br />
The <strong>Unior</strong> ratchet is a must-have tool in car repairs, domestic workshops, and nearly all other<br />
demanding industrial businesses. This well-produced implementation of the tool’s head enables<br />
greater fl exibility in diffi cult-to-reach places and a wider spectrum of use.<br />
It is adaptable to the user's hand, making it easy to use and at the same time enables fast<br />
change of the tool working direction. Endurable gear wheels are produced in accordance<br />
with the most demanding quality standards.<br />
<strong>Pneumatic</strong> reversible<br />
ratchet 3/8”<br />
• Free speed: 250 revolutions per minute<br />
• Max. torque: 27 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 71 l/min<br />
• Air inlet: 1/4”<br />
• Max. bolt size: M6<br />
Advantages<br />
• Light and compact tool<br />
• Quality production<br />
• Handy turn-on switch<br />
• Fast and handy adjustment of the<br />
rotation direction<br />
• Sluice-gate enabling prevention of air<br />
inlet into the tool<br />
Use<br />
• Car industry<br />
• Agricultural equipment<br />
• Heavy industry<br />
• Larger construction machinery<br />
• Individual mounting<br />
1531 1551<br />
A L Torque<br />
615318 3/8” 37 165 27 520<br />
Important!<br />
• The use of <strong>Unior</strong> IMPACT sockets is<br />
recommended.<br />
<strong>Pneumatic</strong> reversible<br />
ratchet 1/2”<br />
• Free speed: 160 revolutions per minute<br />
• Max. torque: 81 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 113 l/min<br />
• Air inlet: 1/4”<br />
• Max. bolt size: M10<br />
A L Torque<br />
615319 1/2” 45 254 81 1200<br />
17
18<br />
<strong>Pneumatic</strong> hammers<br />
1541<br />
Universal use for different types of work<br />
<strong>Unior</strong>’s pneumatic hammers with controlled torque enable fast screwing (fastening and<br />
unfastening) and can handle the most hard-to-handle nuts and oxidized screws. They are universal<br />
and can therefore be used in diff erent types of mounting where maximum torques and<br />
forces are needed. They are becoming more and more popular also in domestic garages.<br />
The basic functions of all <strong>Unior</strong> pneumatic hammers are the same as – they all enable torque<br />
adjustment and determination of the direction of rotation, but diff er from the maximum<br />
torque, way of regulation and overall maximum socket size.<br />
3/8” pneumatic reversible hammer<br />
How to set the rotation direction of the tool.<br />
Important!<br />
• Always use <strong>Unior</strong> IMPACT sockets.<br />
Advantages<br />
• Controlled torque<br />
• Fast screwing<br />
• Wide range of use<br />
Use<br />
• Car industry<br />
• Agricultural equipment<br />
• Heavy industry<br />
• Shipbuilding<br />
• Aeronautical industry<br />
• Larger construction machinery<br />
• Individual mounting<br />
• Free speed: 10.000 revolutions<br />
per minute<br />
• Max. torque: 244 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 71 l/min<br />
• Air inlet: 1/4”<br />
• Max. bolt size: M10<br />
A L Torque<br />
615320 3/8” 175 139 244 1350
244 Nm<br />
art. 1541<br />
1/2” pneumatic<br />
reversible hammer<br />
1561 1562<br />
• Free speed: 8.000 revolution per minutes<br />
• Max. torque: 678 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 113 l/min<br />
• Air inlet: 1/4”<br />
• Max. bolt size: M16<br />
678 Nm<br />
art. 1561<br />
A L Torque<br />
615322 1/2” 190 188 678 2600<br />
Max.<br />
torque<br />
[Nm]<br />
813 Nm<br />
art. 1562<br />
1016 Nm<br />
art. 1571<br />
1491 Nm<br />
art. 1572<br />
2439 Nm<br />
art. 1591<br />
1/2” pneumatic<br />
reversible hammer<br />
• Free speed: 7.000 revolution per minutes<br />
• Max. torque: 813 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 119 l/min<br />
• Air inlet: 1/4”<br />
• Max. bolt size: M18<br />
2439 Nm<br />
art. 1592<br />
A L Torque<br />
615321 1/2” 192 204 813 2800<br />
3388 Nm<br />
art. 1596<br />
4065 Nm<br />
art.1597<br />
19
20<br />
3/4” pneumatic<br />
reversible hammer<br />
1571 1591<br />
• Free speed: 6.500 revolution<br />
per minutes<br />
• Max. torque: 1.016 Nm<br />
• Maximum working pressure : 6.2 bar<br />
• Air consumption: 198 l/min<br />
• Air inlet: 1/4”<br />
• Max. bolt size: M24<br />
3/4” pneumatic<br />
reversible hammer<br />
• Free speed: 5.500 revolution<br />
per minutes<br />
• Max. torque: 1.491 Nm<br />
• Maximum woking pressure: 6.2 bar<br />
• Air consumption: 269 l/min<br />
• Air inlet: 3/8”<br />
• Max. bolt size: M30<br />
A L Torque<br />
615323 3/4” 235 220 1491 5600<br />
1” pneumatic<br />
reversible hammer<br />
• Free speed: 4.000 revolution<br />
per minutes<br />
• Max. torque: 2.439 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 340 l/min<br />
• Air inlet: 1/2”<br />
• Max. bolt size: M36<br />
A L Torque<br />
615324 3/4” 240 236 1016 4550<br />
1572 1596<br />
1592 1597<br />
A L Torque<br />
615326 1” 280 307 2439 10620<br />
1” pneumatic<br />
reversible hammer<br />
• Free speed: 4.000 revolution per minutes<br />
• Max. torque: 2.439 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 340 l/min<br />
• Air inlet: 1/2”<br />
• Max. bolt size: M36<br />
A L Torque<br />
615325 1” 180 495 2439 12500<br />
1.1/2” pneumatic<br />
reversible hammer<br />
• Free speed: 3.000 revolution<br />
per minutes<br />
• Max. torque: 3.388 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 410 l/min<br />
• Air inlet: 1/2”<br />
• Max. bolt size: M45<br />
A L Torque<br />
617690 1.1/2” 145 450 3388 15800<br />
1.1/2” pneumatic<br />
reversible hammer<br />
• Free speed: 3.000 revolution<br />
per minutes<br />
• Max. torque: 4.065 Nm<br />
• Maximum working pressure: 6.2 bar<br />
• Air consumption: 453 l/min<br />
• Air inlet: 1/2”<br />
• Max. bolt size: M52<br />
A L Torque<br />
617691 1.1/2” 145 465 4065 19700
Sets of stroke pneumatic hammers<br />
Stroke pneumatic hammer,<br />
with set of chisels<br />
in plastic box<br />
1514PB 1555<br />
619964 8<br />
Art. Dim.<br />
1514 170<br />
1514 A1 182<br />
1514 A2 180<br />
1514 A3 180<br />
1514 A4 180<br />
1514 A5 190<br />
1514 A6 178<br />
981 PB2 307<br />
<strong>Pneumatic</strong> ratchet and<br />
IMPACT socket set 3/8”<br />
in plastic box<br />
1535 1565<br />
615513 13<br />
Art. Dim.<br />
1531 37<br />
230.4/4 75, 125<br />
230.8/4 6-12, 13-21<br />
230/4 6p 8, 10, 11, 12, 13, 15, 17<br />
1374 50 ml<br />
<strong>Pneumatic</strong> hammer and<br />
IMPACT socket set 3/8”<br />
in plastic box<br />
1545 1575<br />
615514 13<br />
Art. Dim.<br />
1541 175<br />
230.4/4 75, 125<br />
230.8/4 6-12, 13-21<br />
230/4 6p 8, 10, 11, 12, 13, 15, 17<br />
1374 50 ml<br />
<strong>Pneumatic</strong> ratchet and<br />
IMPACT socket set 1/2”<br />
in plastic box<br />
615515 12<br />
Art. Dim.<br />
1551 45<br />
231.4/4 75, 125<br />
231.8/4 10-14, 15-32<br />
231/4 6p 10, 13, 14, 17, 19, 21, 22, 24<br />
1374 50 ml<br />
<strong>Pneumatic</strong> hammer and<br />
IMPACT socket set 1/2”<br />
in plastic box<br />
615516 20<br />
Art. Dim.<br />
1561 175<br />
231.4/4 75, 125<br />
231.8/4 10-14, 15-32<br />
231/4 6p 10, 13, 14, 17, 19, 21, 22, 24, 27<br />
231/4L6p 17, 19, 21, 22, 24, 27<br />
1374 50 ml<br />
<strong>Pneumatic</strong> hammer and<br />
IMACT socket set 3/4”<br />
in plastic box<br />
617161 7<br />
Art. Dim.<br />
1571 240<br />
232/4 6p 19, 24, 27, 32, 36, 41<br />
21
22<br />
<strong>Pneumatic</strong> equipment<br />
<strong>Pneumatic</strong> duster<br />
1508A 1500<br />
• Maximum working pressure: 10.9 bar<br />
• Air consumption: 220 l/min<br />
L A D<br />
617767 260 135 6 130<br />
1508B<br />
Long pneumatic duster<br />
• Maximum working pressure: 10.9 Bar<br />
• Air consumption: 220 l/m<br />
L A D<br />
617768 420 135 6 145<br />
1500PG<br />
1501PG<br />
Pressure gauge for 1500<br />
617741 20<br />
Pressure gauge for 1501<br />
and 1502<br />
617742 20<br />
<strong>Pneumatic</strong> filter regulator<br />
and lubricator 1/4”<br />
L A<br />
617735 90 155 415<br />
1501<br />
• Air inlet: 1/4”<br />
• Maximum working pressure: 9.5 bar<br />
• Air consumption: 600 l/min<br />
• Working pressure: 0.5-8.5 bar<br />
• Working temperature: 5-60 °C<br />
• Filtering grade: 5µ<br />
• Filter capacity: 15 ml<br />
• Lubricator capacity: 25 m<br />
<strong>Pneumatic</strong> filter regulator<br />
and lubricator 3/8”<br />
L A<br />
617736 150 220 1195<br />
1502<br />
• Air inlet: 3/8”<br />
• Maximum working pressure: 9.5 bar<br />
• Air consumption: 1.800 l/min<br />
• Working pressure: 0,5-8,5 bar<br />
• Working temperature: 5-60 °C<br />
• Filtering grade: 5µ<br />
• Filter capacity: 60 ml<br />
• Lubricator capacity: 90 ml<br />
<strong>Pneumatic</strong> filter regulator<br />
and lubricator 1/2”<br />
• Air inlet: 1/2”<br />
• Maximum working<br />
pressure: 9.5 bar<br />
• Air consumption: 2.300 l/min<br />
• Working pressure: 0.5-8.5 bar<br />
• Working temperature: 5-60 °C<br />
• Filtering grade: 5µ<br />
• Filter capacity: 100 ml<br />
• Lubricator capacity: 160 ml<br />
L A<br />
617737 150 220 1395
1503<br />
L A<br />
621473 150 220 1395<br />
1505<br />
• Metal housing<br />
• Outside thread<br />
• Inside hole diameter ø 7 mm<br />
Spiral pneumatic hose<br />
L D<br />
617743 1/4” 9 m 6.5 x 10 660<br />
617744 1/4” 9 m 8 x 12 860<br />
617745 3/8” 9 m 11 x 16 1360<br />
617746 1/4” 12 m 6.5 x 10 830<br />
617747 1/4” 12 m 8 x 12 1100<br />
617748 3/8” 12 m 11 x 16 19000<br />
1506KN7<br />
<strong>Pneumatic</strong> filter regulator<br />
and lubricator 3/4”<br />
• Air inlet: 3/4”<br />
• Maximum working<br />
pressure: 9.5 bar<br />
• Working pressure: 0.5-8.5 bar<br />
• Working temperature: 5-60 °C<br />
• Filtering grade: 5µ<br />
• Filter capacity: 100 ml<br />
• Lubricator capacity: 160 ml<br />
• Air consumption 2500 l/min<br />
Coupling, female part<br />
617795 1/4" 20 54.5 110<br />
617796 3/8" 20 55 102<br />
L<br />
1506KZ7<br />
• Metal housing<br />
• Outside thread<br />
• Inside hole diameter ø 7 mm<br />
• Metal housing<br />
• Outside thread<br />
• Inside hole diameter ø 10 mm<br />
• Outside thread<br />
• Inside hole diameter ø 7 mm<br />
• Outside thread<br />
• Inside hole diameter ø 10 mm<br />
Coupling, female part<br />
617793 1/4” 20 58 104<br />
617794 3/8” 20 54 94<br />
1506KZ10<br />
Coupling, female part<br />
621452 3/8” 24 62.5<br />
621453 1/2” 24 65.0<br />
621454 3/4” 27 67.1<br />
1507Z7<br />
Coupling, male part<br />
617797 1/4” 14 34 18<br />
617798 3/8” 19 36.5 28<br />
618483 1/2” 22 39 38<br />
1507Z10<br />
Coupling, male part<br />
621455 3/8” 17 39.4<br />
621456 1/2” 24 39.4<br />
621457 3/4” 27 48.5<br />
L<br />
L<br />
L<br />
L<br />
23
621515<br />
UNIOR d.d.<br />
Kovaška cesta 10<br />
3214 Zreče<br />
Slovenia<br />
T: +386 (0) 3 757 81 00<br />
F: +386 (0) 3 576 26 43<br />
E: sales@unior.si<br />
I: www.unior<strong>tools</strong>.com