W. Richard Bowen and Nidal Hilal 4

26 1. BAsIC PRINCIPLEs OF ATOMIC FORCE MICROsCOPy
[36] C.L. Cheung, J.H. Hafner, T.W. Odom, K. Kim, C.M. Lieber, Growth and fabrication
with single-walled carbon nanotube probe microscopy tips, Appl. Phys. Lett. 76 (21)
(2000) 3136–3138.
[37] H.J. Dai, J.H. Hafner, A.G. Rinzler, D.T. Colbert, R.E. Smalley, Nanotubes as nanoprobes
in scanning probe microscopy, Nature 384 (6605) (1996) 147–150.
[38] C.T. Gibson, S. Carnally, C.J. Roberts, Attachment of carbon nanotubes to atomic force
microscope probes, Ultramicroscopy 107 (10–11) (2007) 1118–1122.
[39] J.H. Hafner, C.L. Cheung, C.M. Lieber, Growth of nanotubes for probe microscopy
tips, Nature 398 (6730) (1999) 761–762.
[40] E. Bonnaccurso, G. Gillies, Revealing contamination on AFM cantilevers by microdrops
and microbubbles, Langmuir 20 (2004) 11824–11827.
[41] T. Thundat, X.-Y. Zheng, G.Y. Chen, S.L. Sharp, R.J. Warmack, L.J. Schowalter,
Characterization of atomic force microscope tips by adhesion force measurements,
Appl. Phys. Lett. 63 (15) (1993) 2150–2152.
[42] L. Sirghi, O. Kylian, G. Ceccone, F. Rossi, Cleaning and hydrophobization of atomic
force microscopy silicon probes, J. Phys. Chem. B 110 (2006) 25975–25981.
[43] Y.-S. Lo, N.D. Huefner, W.S. Chan, P. Dryden, B. Hagenhoff, T.P. Beebe Jr., Organic
and inorganic contamination on commercial AFM cantilevers, Langmuir 15 (1999)
6522–6526.
[44] S.W. King, R.J. Nemanich, R.F. Davis, Wet chemical processing of (0001)Si 6H-SiC
hydrophobic and hydrophilic surfaces, J. Electrochem. Soc. 146 (5) (1999) 1910–
1917.
[45] D.A. Dobbs, R.G. Bergman, K.H. Theopold, Piranha solution explosion, Chem. Eng.
News 68 (17) (1990) 2.
[46] C.V. Erickson, Piranha solution explosions, Chem. Eng. News 68 (33) (1990) 2.
[47] T. Arai, M. Tomitori, Removal of contamination and oxide layers from UHV-AFM tips,
Appl. Phys. A 66 (1998) S319–S323.
[48] K. Choi, T.-J. Eom, C. Lee, Comparison of the removal efficiency for organic contaminants
on silicon wafers stored in plastic boxes between UV/O 3 and ECR oxygen
plasma cleaning methods, Thin Solid Films 435 (2003) 227–231.
[49] E. Bonaccurso, G. Gillies, Revealing contamination on AFM cantilevers by microdrops
and microbubbles, Langmuir 20 (2004) 11824–11827.
[50] R. Luginbuhl, A. Szuchmacher, M.D. Garrison, J.-B. Lhoest, R.M. Overney,
B.D. Ratner, Comprehensive surface analysis of hydrophobically functionalized SFM
tips, Ultramicroscopy 82 (2000) 171–179.
[51] L. Montellius, J.O. Tegenfeldt, Direct observation of the tip shape in scanning probe
microscopy, Appl. Phys. Lett. 62 (21) (1993) 2628–2630.
[52] E.J. van Loenen, D. Dijkamp, A.J. Hoeven, J.M. Lenssink, J. Dieleman, Evidence for tip
imaging in scanning tunneling microscopy, Appl. Phys. Lett. 56 (18) (1990) 1755–1757.
[53] H.G. Hansma, R.L. Sinsheimer, J. Groppe, T.C. Bruice, V. Elings, M. Bezanilla,
I.A. Mastrangelo, P.V.C. Hough, P.K. Hansma, Recent advances in atomic-force microscopy
of DNA, Scanning 15 (5) (1993) 296–299.
[54] H.G. Hansma, J.P. Cleveland, M. Radmacher, D.A. Walters, P.E. Hillner, M. Bezanilla,
M. Fritz, D. Vie, H.G. Hansma, C.B. Prater, J. Massie, L. Fukunaga, J. Gurley, V. Elings,
Tapping mode atomic force microscopy in liquids, Appl. Phys. Lett. 64 (13) (1994)
1738–1740.
[55] Q. Zhong, D. Inniss, K. Kjoller, V. Elings, Fractured polymer/silica fiber surface studied
by tapping mode atomic force microscopy, Surf. Sci. Lett. (1993) L688–L692.
[56] I. Schmitz, M. Schreiner, G. Friedbacher, M. Grasserbauer, Phase imaging as an extension
to tapping mode AFM for the identification of material properties on humidity
sensitive surfaces, Appl. Surf. Sci. 115 (1997) 190–198.
[57] R.S. McLean, B.B. Sauer, Tapping mode AFM studies using phase detection for resolution
of nanophases in segmented polyurethanes and other block copolymers,
Macromolecules 30 (1997) 8314–8317.