W. Richard Bowen and Nidal Hilal 4

170 5. AFM AND DEvELOPMENT OF (BIO)FOULINg-REsIsTANT MEMBRANEs
[10] W.R. Bowen, N. Hilal, R.W. Lovitt, C.J. Wright, Direct measurement of interactions
between adsorbed protein layers using an atomic force microscope, J. Colloid Interface
Sci. 197 (1998) 348.
[11] W.R. Bowen, N. Hilal, R.W. Lovitt, C.J. Wright, A new technique for membrane characterisation:
direct measurement of the force of adhesion using an atomic force microscope,
J. Memb. Sci. 139 (1998) 269–274.
[12] W.R. Bowen, N. Hilal, R.W. Lovitt, C.J. Wright, Characterisation of membrane surfaces:
direct measurement of biological adhesion using an atomic force microscope, J. Memb.
Sci. 154 (2) (1999) 205–212.
[13] W.R. Bowen, N. Hilal, R.W. Lovitt, C.J. Wright, An atomic force microscopy study of
the adhesion of a silica sphere to a silica surface – effects of surface cleaning, Colloids
Surf. A Physicochem. Eng. Asp. 157 (1999) 117–125.
[14] G. Toikka, R.A. Hayes, J. Ralston, Adhesion of iron oxide to silica studied by atomic
force microscopy, J. Colloid Interface Sci. 180 (1996) 239–248.
[15] S. Veeramansunei, M.R. Yalamanchili, J.D. Miller, Measurement of interaction forces
between silica and alpha-alumina by atomic force microscopy, J. Colloid Interface Sci.
184 (1996) 594–600.
[16] J.E. Kilduff, S. Mattaraj, J.P. Pieracci, G. Belfort, Photochemical modification of
poly(ether sulfone) and sulfonated poly(sulfone) nanofiltration membranes for control
of fouling by natural organic matter, Desalination 132 (1–3) (2000) 133–142.
[17] M. Taniguchi, G. Belfort, Low protein fouling synthetic membranes by UV assisted
surface grafting modification: varying monomer type, J. Memb. Sci. 231 (1–2) (2004)
147–157.
[18] M. Ulbricht, H. Matuschewski, A. Oechel, H.G. Hicke, Photo-induced graft polymerization
surface modifications for the preparation of hydrophilic and low protein-adsorbing
ultrafiltration membranes, J. Memb. Sci. 115 (1) (1996) 31–47.
[19] L. Al-Khatib, Development of (bio)fouling resistant membranes for water treatment
applications, in: School of Chemical, Environmental and Mining Engineering,
University of Nottingham, 2006.
[20] N. Hilal, L. Al-Khatib, H. Al-Zoubi, R. Nigmatullin, Atomic force microscopy study of
membranes modified by surface grafting of cationic polyelectrolyte, Desalination 185
(2005) 1025–1035.
[21] D. Kuzmenko, E. Arkhangelsky, S. Belfer, V. Freger, V. Gitis, Chemical cleaning of UF
membranes fouled by BSA, Desalination 179 (1–3) (2005) 323–333.
[22] W.G. Liu, F. Li, X.D. Zhao, K.D. Yao, Q.G. Liu, Atomic force microscope characterisation
forces between bovine serum albumin and cross-linked alkylated chitosan membranes in
media of different pH, Polym. Int. 51 (12) (2002) 1459–1463.
[23] A.I. Schafer, U. Schwicker, M.M. Fischer, A.G. Fane, T.D. Waite, Microfiltration of
colloids and natural organic matter, J. Memb. Sci. 171 (2) (2000) 151–172.
[24] J.A. Brant, Membrane colloid interactions: comparison of extended DLVO predictions
with AFM force measurements, Environ. Eng. Sci. 19 (6) (2002) 413–427.
[25] W.R. Bowen, T.A. Doneva, Atomic force microscopy of membranes, in: A. Hubbard
(Ed.), Encyclopedia of Surface and Colloid Science, Marcel Dekker, New York, 2002.
[26] A. Noshay, L.M. Robeson, Sulfonated polysulfone, J. Appl. Polym. Sci. 20 (1976)
1885–1903.
[27] M. Nystrom, P. Jarvinen, Modification of polysulfone ultrafiltration membranes with
UV irradiation and hydrophilicity screening agents, J. Memb. Sci. 60 (1991) 275–296.
[28] T. Kobayashi, M. Rikukawa, K. Sanui, N. Ogata, Proton-conducting polymers derived
from poly(ether-ether ketone) and poly(4-phenoxybenzoyl-1,4-phenylene), Solid State
Ionics 106 (1998) 219–225.