W. Richard Bowen and Nidal Hilal 4

REFERENCEs 137
[4] W.R. Bowen, N. Hilal, R.W. Lovitt, C.J. Wright, Characterisation of membrane surfaces:
direct measurement of biological adhesion using an atomic force microscope, J.
Memb. Sci. 154 (1999) 205–212.
[5] W.R. Bowen, T.A. Doneva, Atomic force microscopy characterisation of ultrafiltration
membranes: correspondence between surface pore dimensions and molecular weight
cut-off, Surf. Interface Anal. 29 (2000) 44–547.
[6] W.R. Bowen, N. Hilal, R.W. Lovitt, A.O. Sharif, P.M. Williams, Atomic force microscope
studies of membranes: force measurement and imaging in electrolyte solutions,
J. Memb. Sci. 126 (1997) 77–89.
[7] W.R. Bowen, T.A. Doneva, J.A.G. Stoton, The use of atomic force microscopy to quantify
membrane surface electrical properties, Colloids Surf. A Physicochem. Eng. Asp.
201 (2002) 73–83.
[8] W.R. Bowen, T.A. Doneva, Atomic force microscopy studies of nanofiltration membranes:
surface morphology, pore size distribution and adhesion, Desalination 129
(2000) 63–172.
[9] W.R. Bowen, N. Hilal, M. Jain, R.W. Lovitt, A.O. Sharif, C.J. Wright, The effects of electrostatic
interactions on the rejection of colloids by membrane pores – visualisation
and quantification, Chem. Eng. Sci. 54 (1999) 369–375.
[10] W.R. Bowen, T.A. Doneva, H.B. Yin, Polysulphone-sulphonated poly (ether ether)
ketone blend membranes: systematic synthesis and characterization, J. Memb. Sci. 181
(2001) 253–263.
[11] W.R. Bowen, T.A. Doneva, H.B. Yin, Separation of humic acid from a model surface
water with PSU/SPEEK blend UF/NF membranes, J. Memb. Sci. 206 (2002) 417–429.
[12] K. Al-Anezi, D.J. Johnson, N. Hilal, An atomic force microscope study of calcium
carbonate adhesion to desalination process equipment: effect of anti-scale agent,
Desalination 220 (2008) 359–370.
[13] W.R. Bowen, R.W. Lovitt, C.J. Wright, Atomic force microscope studies of stainless steel:
surface morphology and colloidal particle adhesion, J. Mater. Sci. 36 (2001) 623–629.
[14] H.-J. Butt, B. Capella, M. Kapple, Force measurements with the atomic force microscope:
technique, interpretation and applications, Surf. Sci. Rep. 59 (2005) 1–152.
[15] T.S. Chow, Size-dependent adhesion of nanoparticles on rough substrates, J. Phys.
Condens. Matt. 15 (2003) L83–L87.
[16] Y.I. Rabinovich, J.J. Adler, A. Ata, R.K. Singh, B.M. Moudgil, Adhesion between nanoscale
rough surfaces. II. Measurement and comparison with theory, J. Colloid Interface
Sci. 232 (2000) 17–24.
[17] A. Abbott, G. Capper, K.J. McKenzie, A. Glidle, K.S. Ryder, Electropolishing of stainless
steels in a choline chloride based ionic liquid: an electrochemical study with surface
characterisation using SEM and atomic force microscopy, Phys. Chem. Chem.
Phys. (PCCP) 8 (2006) 4214–4221.
[18] V. Vignal, J.C. Roux, S. Flandrois, A. Fevrier, Nanoscopic studies of stainless steel electropolishing,
Corr. Sci. 42 (2000) 1041–1053.
[19] J. Sanchez, J. Fullea, C. Andrade, J.J. Gaitero, A. Porro, AFM study of the early corrosion
of a high strength steel in a diluted sodium chloride solution, Corr. Sci. 50 (2008)
1820–1824.
[20] R. Wang, An AFM and XPS study of corrosion caused by micro-liquid of dilute sulfuric
acid on stainless steel, Appl. Surf. Sci. 227 (2004) 399–409.
[21] R. Solmaz, G. Kardas, M. Culha, B. Yazici, M. Erbil, Investigation of adsorption and
inhibitive effect of 2-mercaptothiazoline on corrosion of mild steel in hydrochloric
acid media, Electrochim. Acta 53 (2008) 5941–5992.
[22] Q. Qu, S. Jiang, W. Bai, L. Li, Effect of ethylene tetraacetic acid disodium on the corrosion
of cold rolled steel in the presence of benzotriazole in hydrochloric acid,
Electrochim. Acta 52 (2007) 6811–6820.