Selektive katalytische Reduktion von Stickoxiden in Kraftfahrzeugen ...

Acta, 219:315–323, 1993.
Literaturverzeichnis
[116] Suzuki, T. und Mitachi, K. Experimental observation of liquid droplet impingement
upon super-heated wall with high Weber numbers. Proc. Int. Symp. Heat
and Mass Transfer in Spray Systems, Antalya, Türkei, 2005.
[117] Toda, S. A Study of Mist Cooling-Thermal Behaviors of Liquid Films Formed
from Mist Drops on a Heated Surface at High Temperature and High Heat Fluxes.
Technology Reports, Tohuku Univ. Japan, 1971.
[118] Toda, S. A Study of Mist Cooling (2nd Report: Theory of Mist Cooling and its
Fundamental Experiments). 3 (1):1–44, 1974.
[119] VDI-Gesellschaft (Herausgeber). VDI-Wärmeatlas. Springer-Verlag, 8. Auflage,
1997.
[120] von Berg, E., Edelbauer, W., Alajbegovi, A. und Tatschl, R. Coupled Calculation
of Cavitating Nozzle Flow, Primary Diesel Fuel Break-up and Spray Formation
with an Eulerian Multi-fluid-model. In Proc. ICLASS-2003, Sorrento, Italien,
12-02. ICLASS, 2003.
[121] Wachters, L. H. J. und Westerling, N. A. J. The heat transfer from a hot wall to
impinging water drops in the spheroidal state. Chem. Eng. Sci., 21:1047–1056,
1966.
[122] Warnatz, J., Maas, U. und Dibble, R. W.
Auflage, 2001. ISBN 3-540-42128-9.
Verbrennung. Springer-Verlag, 3.
[123] Weltens, H., Bressler, H., Terres, F., Neumaier, H. und Rammoser, D. Optimisation
of Catalytic Converter Gas Flow Distribution by CFD prediction. SAE,
930780, 1993.
[124] Windmann, J., Braun, J., Zacke, P., Tischer, S., Deutschmann, O. und Warnatz,
J. Impact of the inlet flow distribution on the light-off behavior of a 3-way
catalytic converter. SAE, 2003-01-0937, 2003.
[125] Wruck, N. Transientes Sieden von Tropfen beim Wandaufprall. Dissertation,
Fakultät für Maschinenwesen, RWTH Aachen, 1998.
[126] Wurzenberger, J. C. und Wanker, R. Multi-Scale SCR Modeling, 1D Kinetic
Analysis and 3D System Simulation. SAE, 2005-01-0948, 2005.
[127] www.dieselnet.com. Emission Standards. 2006.
147